Directional strain sensing is essential for advanced sensor applications in the field of human‐machine interfaces and healthcare. Here, the angle dependent anisotropic strain sensitivity caused by charge carriers percolating through cross‐linked gold nanoparticle (GNP) networks is studied and these versatile materials are used for the fabrication of wearable triaxial pulse and gesture sensors. More specifically, the anisotropic response of 1,9‐nonanedithiol cross‐linked GNP films is separated into geometric and piezoresistive contributions by fitting the measured data with an analytic model. Hereby, piezoresistive coefficients of g11 ∼ 32 and g12 ∼ 21 are extracted, indicating a slightly anisotropic response behavior of the GNP‐based material. To use the material for healthcare applications, arrangements of three GNP transducers are patterned lithographically and fully embedded into a highly flexible silicone polymer (Dragon Skin 30). The new encapsulation method ensures good and robust electrical contacts and enables facile handling and protection from external influences. A facile read‐out with wireless data transmission using off‐the‐shelf electrical components underlines the great potential of these devices for applications as skin‐wearable healthcare sensors.
In this article, highly sensitive differential pressure sensors based on free‐standing membranes of cross‐linked gold nanoparticles are demonstrated. The nanoparticle membranes are employed as both diaphragms and resistive transducers. The elasticity and the pronounced resistive strain sensitivity of these nanometer‐thin composites enable the fabrication of sensors achieving high sensitivities exceeding 10−3 mbar−1 while maintaining an overall small membrane area. Furthermore, by combining micro‐bulge tests with atomic force microscopy and in situ resistance measurements the membranes’ electromechanical responses are studied through precise observation of the concomitant changes of the membranes’ topography. The study demonstrates the high potential of free‐standing nanoparticle composites for the fabrication of highly sensitive force and pressure sensors and introduces a unique and powerful method for the electromechanical investigation of these materials.
Wearable flexible strain sensors with spatial resolution enable the acquisition and analysis of complex actions for noninvasive personalized healthcare applications. To provide secure contact with skin and to avoid environmental pollution after usage, sensors with biocompatibility and biodegradability are highly desirable. Herein, wearable flexible strain sensors composed of crosslinked gold nanoparticle (GNP) thin films as the active conductive layer and transparent biodegradable polyurethane (PU) films as the flexible substrate are developed. The patterned GNP films (micrometer‐ to millimeter‐scale square and rectangle geometry, alphabetic characters, and wave and array patterns) are transferred onto the biodegradable PU film via a facile, clean, rapid and high‐precision contact printing method, without the need of a sacrificial polymer carrier or organic solvents. The GNP‐PU strain sensor with low Young's modulus (≈17.8 MPa) and high stretchability showed good stability and durability (10 000 cycles) as well as degradability (42% weight loss after 17 days at 74 °C in water). The GNP‐PU strain sensor arrays with spatiotemporal strain resolution are applied as wearable eco‐friendly electronics for monitoring subtle physiological signals (e.g., mapping of arterial lines and sensing pulse waveforms) and large‐strain actions (e.g., finger bending).