Mechanically lined pipes (MLP) combine a carbon-steel base pipe with a thin corrosion-resistant liner that transfers load through frictional contact. This numerical study compares the stress responses of matched monometallic and mechanically lined pipes under prescribed internal pressure, temperature, and bending. Three-dimensional finite element models are used to represent the material layers, contact, friction, and thermal loading. Circumferential mesh refinement and comparison with field inspection data provide checks on the reported stress response. In the non-bending one-factor cases, pressure and diameter primarily affect equivalent stress, whereas increasing temperature increases liner compression and base-pipe equivalent stress. At constant total wall thickness, increasing liner thickness reduces liner compression but increases stress in the thinner base pipe. Bending increases both response measures. Local sensitivity and two-factor analyses characterize stress variations within the sampled conditions. Exploratory regression equations show high internal cross-validation accuracy, and on 22 finite-element cases, the unchanged regression equations achieved R2 values of 0.965 for liner stress and 0.986 for base-pipe stress. These results support stress-trend estimation within the tested conditions but do not establish accuracy for arbitrary five-factor combinations or a universal failure threshold.