Xueyuan Long

Dr. Xueyuan Long


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 February 2020 in Energies
Verified
Journal Article
Open access
PDF file
QHQian Huang
Qian Huang
XLXueyuan Long
Xueyuan Long
A modified computational fluid dynamic (CFD) model has been developed to obtain oil removal efficiency for oily wastewater treatment in large-scale flotation tanks. According to the investigation of oil droplet/bubble interactions in a flotation tank, a modified Bloom–Heindel model is used to calculate the collision and attachment efficiencies between oil droplets and bubbles. Effects of the gas flow rate, oil diameter and oil concentration on oil removal efficiency of flotation tank were analyzed experimentally. The application scope of this modified CFD model is evaluated using experimental results. In addition, the comparison between the existing model and the modified model demonstrates that this modified CFD model can make a good prediction for the separation performance of the flotation tank.

8 April 2026 in Sensors
Verified
Journal Article
Open access
PDF file
QHQian Huang
Qian Huang
RWRuiLin Wang
RuiLin Wang
JHJingxi Hu
Jingxi Hu
HJHao Jiao
Hao Jiao
CZChi Zhang
Chi Zhang
LLLiangchen Lv
Liangchen Lv
As a branch of nondestructive testing (NDT), Pulsed Eddy Current Testing (PECT) is characterized by its wide frequency spectrum and high penetration depth. After years of development, it has been widely applied to defect detection and material characterization of key components in industries such as petrochemicals, new energy, and aerospace. With the large-scale application of new energy sources like liquefied natural gas (LNG), methanol, and liquid hydrogen, the demand for NDT of non-ferromagnetic materials (e.g., austenitic stainless steel) has surged. However, challenges such as electromagnetic leakage caused by low magnetic permeability and the lift-off effect induced by protective layers impose stricter requirements on inspection technologies, driving the evolution of PECT towards adaptability in complex scenarios. This paper systematically reviews the latest advances in PECT technology, covering detection sensors, modeling methods, detection signal processing, and engineering applications. With a particular emphasis on research outcomes from the past decade, this paper also proposes potential directions for future development, aiming to provide a reference for innovative research and the industrial promotion of PECT technology.

30 March 2022 in Energies
Verified
Journal Article
Open access
PDF file
XLXueyuan Long
Xueyuan Long
QHQian Huang
Qian Huang
YTYuan Tian
Yuan Tian
铃母铃燕 母
铃燕 母
In this study, a mathematical model for the supersonic condensate flow of natural gas to understand its condensation process in a supersonic separator has been proposed. The effects of export back pressure, inlet temperature, and inlet pressure on the condensation parameters were investigated. The results indicate that the condensation position moves forward with the increase in the inlet pressure and the decrease in the inlet temperature. A method for determining the optimal range of operating parameters (export back pressure, inlet temperature, and inlet pressure) for the supersonic separator is proposed. Within the optimal back pressure range, the region of extreme Mach number in the device should be at the inlet of the straight pipe section after the separation gap, and extreme value distribution areas of low temperature, condensation nucleation, and humidity should be between the nozzle expansion section and the inlet of the straight pipe section. It is important to choose a higher temperature among the optimal values as the inlet temperature and also ensure that the optimal inlet pressure is not higher than the pressure corresponding to the humidity inflection point. At the optimal inlet pressure, the maximum humidity distribution area should be behind the supersonic nozzle expansion section and in front of the inlet of the straight pipe section.

27 December 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
QHQian Huang
Qian Huang
HHHuirong Huang
Huirong Huang
XLXueyuan Long
Xueyuan Long
YTYuan Tian
Yuan Tian
MMMeng Meng
Meng Meng
The supersonic swirling device is a new apparatus that can be used for natural-gas liquefaction. The structure of the supersonic swirling device has an important impact on the liquefaction efficiency. Therefore, this study presents a structural design method for supersonic cyclones based on CFD theory. Using the production parameters of a liquefied natural gas (LNG) peak-shaving station as the study case, a detailed design and design comparison of each part of the supersonic swirling separator are carried out. An optimum LNG supersonic swirling separator design was obtained. To ensure that the designed supersonic swirling separator achieved better liquefaction effectiveness, it was ascertained that no large shockwaves were generated in the de Laval nozzle, the pressure loss on the swirler was small, and the swirler was able to produce a large centripetal acceleration. The opening angle of the diffuser and the length of the straight tube were designed considering the location at which normal shockwaves were generated. The location at which shockwaves are generated and the friction effect are important parameters that determine the gap size. With this design guidance, the optimal structural dimensions of the supersonic swirling device for a given processing capacity were determined as follows: a swirler with six vanes and an 8 mm wide channel; a 10D-long straight tube, an opening angle of 20° between the straight tube and the divergent section, and a gap size of 2 mm. Compared with “Twister II”, the new device has better liquefaction efficiency.

22 April 2025 in Processes
Verified
Journal Article
Open access
PDF file
HLHongyi Liang
Hongyi Liang
QHQian Huang
Qian Huang
XLXin Li
Xin Li
QWQuan Wu
Quan Wu
HYHan Yan
Han Yan
XLXueyuan Long
Xueyuan Long
With increasing natural gas processing demands, triethylene glycol (TEG) in dehydration systems becomes contaminated by gas-carried impurities, leading to problematic foaming, degradation, and significant glycol losses that compromise operational economics, pipeline integrity, and product quality. To systematically investigate impurity effects, we conducted comprehensive single-factor TEG regeneration experiments simulating field conditions. Through precise measurements of foaming height, defoaming time, and interfacial tension, we established clear correlations between impurity types and TEG foaming characteristics. Our results demonstrate a distinct hierarchy of foaming influence: chemical additives > solid impurities > water-soluble inorganic salts > MDEA > hydrogen sulfide > hydrocarbons. Chemical additives showed the most pronounced effect on surface tension, reducing it to 31.1 mN/m at 1500 mg/L. Water-soluble inorganic salts affected foaming through combined decomposition and crystalline morphology effects, ranked as MgCl2 > NaHCO3 > KCl > NaCl > Na2SO4 > CaCl2 (MgCl2 achieving 33.8 mN/m at 2000 mg/L). Solid impurity impacts correlated strongly with particle morphology (CaCO3 > Fe2O3 > CaSO4 > ZnO > CuO > Al2O3 > FeS), stabilizing at 1.5 mg/L. Hydrocarbons showed negligible influence, while hydrogen sulfide and MDEA caused only minor surface tension reductions with limited foaming effects. Based on these findings, we propose targeted mitigation strategies for industrial implementation.

7 April 2026 in Processes
Verified
Journal Article
Open access
PDF file
HHHuirong Huang
Huirong Huang
CWChen Wu
Chen Wu
ZJZhong Jie
Zhong Jie
HLHuishu Liu
Huishu Liu
QHQian Huang
Qian Huang
JGJing Gong
Jing Gong
Due to long-term burial underground, oil and gas pipelines are susceptible to external surface corrosion influenced by time and soil conditions, which can lead to leakage and burst failures. Pipeline failure not only results in significant economic losses but also has catastrophic impacts on human safety and the environment. Therefore, modeling and analyzing the corrosion failure of these pipelines is of critical practical importance to ensure their safe operation during service. Addressing the insufficient research on correlation effects in current reliability evaluations of corroded pipelines, this paper proposes a calculation method for the failure probability of corroded oil and gas pipelines that considers the influence of two-layer correlations. Taking a specific segment of the Shaanxi–Beijing pipeline as a case study, the Monte Carlo sampling algorithm is employed to calculate the impact of two-layer correlations and the quantity of defect on the pipeline’s failure probability. Furthermore, a sensitivity analysis of the correlation coefficients is conducted. The results indicate that the influence of defect correlation on pipeline failure probability is significantly more pronounced than that of random variable correlation. The probabilities of pinhole leakage and burst failure decrease as the correlation coefficient between defects increases, while they increase with the number of defects. Random variable correlation exhibits no impact on pinhole leakage probability; however, the burst failure probability decreases with an increasing correlation coefficient between wall thickness and pipe diameter, but increases as the correlation between initial defect length and depth grows. Furthermore, the correlation coefficient between axial and radial defect growth rates exerts a bidirectional effect on burst failure probability: during the first 25 years of the prediction period, the failure probability increases with the correlation coefficient, whereas it subsequently decreases after approximately 25 years. These findings are applicable to the reliability evaluation of oil and gas pipelines containing multiple corrosion defects, providing valuable technical references for ensuring safe operation and the steady supply of energy resources.