Tatiana V. Filippova

Dr. Tatiana V. Filippova


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 October 2025 in Compounds
Verified
Journal Article
Open access
PDF file
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
HLHieu Minh Ngoc Le
Hieu Minh Ngoc Le
TSTatiana Shatalova
Tatiana Shatalova
AMAlbina Murashko
Albina Murashko
TFTatiana V. Filippova
Tatiana V. Filippova
AKAlexander V. Knot’ko
Alexander V. Knot’ko
Low-crystalline hydroxyapatite was synthesized from an aqueous solution of calcium chloride (CaCl2), and a mixed-anionic (HPO42− и CO32−) aqueous solution prepared from potassium hydrophosphate trihydrate (K2HPO4 3Н2О), and potassium carbonate (K2CO3). The interaction of K2CO3 and K2HPO4 salts during synthesis from a mixed-anionic solution in the reaction zone without additional regulation provided the pH level necessary for the synthesis of hydroxyapatite. For comparison, as references, powders were also synthesized from an aqueous solution of CaCl2 and from aqueous solutions of either K2HPO4 or K2CO3. The phase composition of the powder synthesized from aqueous solutions of CaCl2 and K2HPO4 included brushite (CaНРО4·2H2O). The phase composition of the powder synthesized from aqueous solutions of CaCl2 and K2CO3 included calcite (CaCO3). The phase composition of all synthesized powders contained potassium chloride (sylvine, KCl), as a reaction by-product. After heat treatment at 1000 °C of the powder containing low-crystalline hydroxyapatite and KCl, powder of chlorapatite (Са10(РО4)6Cl2) was obtained. After heat treatment of a powder containing brushite (CaНРО4·2H2O) and KCl at 800 and 1000 °C, a powder with the phase composition including β-calcium pyrophosphate (β-Ca2P2O7), β-calcium orthophosphate (β-Ca3(PO4)2), and potassium-calcium pyrophosphate (K2CaP2O7) was obtained. Heat treatment of calcite (CaCO3) powder at 800 °C, as expected, led to the formation of calcium oxide (CaO). Synthesized powders, including biocompatible minerals such as hydroxyapatite, chlorapatite, brushite, monetite, calcium pyrophosphate, calcium potassium pyrophosphate, tricalcium phosphate, and calcite, can be used for the creation of biocompatible inorganic materials or composite materials with a biocompatible polymer matrix. The potassium chloride present in the synthesized powders can act as one of the precursors of biocompatible minerals, such as chlorapatite or calcium potassium pyrophosphate, or it can be treated as a removable inorganic porogen.

1 September 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
HLHieu Minh Ngoc Le
Hieu Minh Ngoc Le
TSTatiana Shatalova
Tatiana Shatalova
AMAlbina Murashko
Albina Murashko
TFTatiana V. Filippova
Tatiana V. Filippova
AKAlexander V. Knot’ko
Alexander V. Knot’ko
Low crystalline hydroxyapatite was synthesized from an aqueous solution of calcium chloride CaCl2 and a mixed-anionic (HPO42- и CO32-) aqueous solution prepared from potassium hydro-phosphate trihydrate K2HPO4 3Н2О and potassium carbonate K2CO3. The interaction of K2CO3 and K2HPO4 salts during synthesis from a mixed anionic solution in the reaction zone without additional regulation provided the pH level necessary for the synthesis of hydroxyapatite. For comparison, as references, powders were also synthesized from an aqueous solution of calcium chloride CaCl2 and from aqueous solutions of either potassium hydrophosphate K2HPO4 or potassium carbonate K2CO3. The phase composition of the powder synthesized from aqueous solutions of calcium chlo-ride CaCl2 and potassium hydrophosphate K2HPO4 included brushite CaНРО4·2H2O. The phase composition of the powder synthesized from aqueous solutions of calcium chloride CaCl2 and po-tassium carbonate K2CO3 included calcite CaCO3. The phase composition of all synthesized pow-ders contained potassium chloride (sylvine) KCl as a reaction by-product. After heat treatment at 1000 °C of the powder containing low crystalline hydroxyapatite and potassium chloride (sylvine) KCl, powder of chlorapatite Са10(РО4)6Cl2 was obtained. After heat treatment of a powder con-taining brushite CaНРО4·2H2O and potassium chloride (sylvine) KCl at 800 and 1000 °C, a powder with the phase composition including β-calcium pyrophosphate β-Ca2P2O7, β-calcium ortho-phosphate β-Ca3(PO4)2 and potassium-calcium pyrophosphate K2CaP2O7 was obtained. Heat treatment of calcite CaCO3 powder at 800 °C, as expected, led to the formation of calcium oxide CaO. Synthesized powders including biocompatible minerals such as hydroxyapatite, chlorapatite, brushite, monetite, calcium pyrophosphate, calcium potassium pyrophosphate, tricalcium phos-phate, calcite can be used for creation of biocompatible inorganic materials or composite materials with a biocompatible polymer matrix. The potassium chloride present in the synthesized powders can act as one of the precursors of biocompatible minerals such as chlorapatite or calcium potassium pyrophosphate; or it can be treated as a removable inorganic porogen.

16 June 2025 in Compounds
Verified
Journal Article
Open access
PDF file
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
SASultanoskaya Alexandra
Sultanoskaya Alexandra
SSSergei Savelev
Sergei Savelev
TSTatiana Shatalova
Tatiana Shatalova
FYFilippov Yaroslav
Filippov Yaroslav
MAMuslim R. Akhmedov
Muslim R. Akhmedov
Powders with phase composition including quasi-amorphous phases and calcium carbonate CaCO3 in the form of calcite or aragonite and sodium halite NaCl as a reaction by-product were synthesized from 0.5M aqua solutions of sodium silicate and 0.5M aqua solutions of calcium and/or magnesium chlorides. Starting solutions were taken in quantities which could provide precipitation of hydrated calcium and/or magnesium silicates with molar ratios Ca/Si = 1 (CaSi), Mg/Si = 1 (MgSi) or (Ca+Mg)/Si = 1 (CaMgSi). Hydrated calcium and/or magnesium silicates, hydrated silica, magnesium carbonate, hydrated magnesium carbonate or hydrated magnesium silicate containing carbonate ions are suspected as components of quasi-amorphous phases presented in synthesized powders. Heat treatment of synthesized powders at 400, 600, 800 °C and pressed preceramic samples at 900, 1000, 1100 and 1200 °C were used for investigation of thermal evolution of the phase composition and microstructure of powders and ceramic samples. Mass loss of powder samples under investigation during heat treatment was provided due to evacuation of H2O (m/z = 18), CO2 (m/z = 44) and NaCl at temperatures above its melting point. After sintering at 1100 °C, the phase composition of ceramic samples included wollastonite CaSiO3 (CaSi_1100); enstatite MgSiO3, clinoenstatite MgSiO3 and forsterite Mg2SiO4 (MgSi_1100); and diopside CaMgSi2O6 (CaMgSi_1100). After sintering at 1200 °C, the phase composition of ceramics CaSi_1200 included pseudo-wollastonite CaSiO3. After heat treatment at 1300 °C, the phase composition of MgSi_1300 powder included preferably protoenstatite MgSiO3. The phase composition of all samples after heat treatment belongs to the oxide system CaO–MgO–SiO2. Ceramic materials in this system are of interest for use in different areas, including refractories, construction materials and biomaterials. Powders prepared in the present investigation, both via precipitation and via heat treatment, can be used for the creation of materials with specific properties and in model experiments as lunar regolith simulants.

26 October 2026 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
Marat M. AkhmedovMarat M. Akhmedov
Marat M. Akhmedov
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
OGOlga T. Gavlina
Olga T. Gavlina
NFNematova Farkhunda Fathulloevna
Nematova Farkhunda Fathulloevna
TSTatiana Shatalova
Tatiana Shatalova
Nataliya R. KildeevaNataliya R. Kildeeva
Nataliya R. Kildeeva
The creation of new biocompatible and resorbable composite materials with an alginate matrix and fine synthetic calcium salts as a filler for potential applications in regenerative medicine is an important area of materials science. Freeze-dried porous (0.05–0.06 g/cm3) composite materials were prepared from homogeneous molding compositions containing distilled water (95 wt. %), fine inorganic powders of calcium salts (2.5 wt. %), and sodium alginate (2.5 wt. %). An aqueous solution of calcium chloride (CaCl2) and an aqueous mixed-anionic solution, which were prepared by mixing solutions of (NH4)2CO3 and (NH4)2H2P2O7 taken in different proportions, were used for syntheses of fine inorganic powders. The molar ratios (NH4)2H2P2O7)/((NH4)2CO3+(NH4)2H2P2O7) of salts used for mixed-anionic solutions preparation were established as 0 (reference powder), 0.02, 0.04, 0.08 and 0.16. Quantities of aqueous solutions of calcium chloride (CaCl2) were taken to provide a molar ratio CaCl2/((NH4)2CO3+(NH4)2H2P2O7) equal to 1.00 (reference powder), 1.02, 1.04, 1.08 and 1.16. The phase composition of synthesized inorganic powders included calcium carbonate (CaCO3) (mostly vaterite) and a quasi-amorphous phase of calcium phosphates (primarily hydrated calcium pyrophosphate (Ca2P2O7 xH2O)). All synthesized powders contained adsorbed and occluded salts present in the mother liquor after synthesis was completed, before separation of the precipitate. The mother liquors were aqueous solutions of ammonium chloride (NH4Cl) (all syntheses) and calcium chloride (CaCl2) (syntheses from mixed-anionic solutions). As components of inorganic powders used as fillers in the composite materials, ammonium chloride (NH4Cl) and calcium chloride (CaCl2) provoked a partial cross-linking of sodium alginate in the stages of preparation of molding compositions, composite samples molding, freezing, and freeze-drying. All freeze-dried porous composite materials demonstrated a high water absorption capacity of 4600–9200%. The most pronounced cross-linked effect was observed for alginate matrices loaded with powders synthesized at molar ratios CaCl2/((NH4)2CO3+(NH4)2H2P2O7) equal to 1.04 and 1.08, demonstrating the lowest water absorption and dry mass loss after dipping in distilled water for 12 h. Prepared freeze-dried porous composite materials with an alginate matrix and calcium carbonate and/or quasi-amorphous phase of calcium phosphates (primarily hydrated calcium pyrophosphate) powders, used as a filler, can be recommended for subsequent testing as an extracellular matrix for soft/hard tissue repair, as wound dressings or bone defect fillers.

21 September 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Marat M. AkhmedovMarat M. Akhmedov
Marat M. Akhmedov
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
OGOlga T. Gavlina
Olga T. Gavlina
NFNematova Farkhunda Fathulloevna
Nematova Farkhunda Fathulloevna
TSTatiana Shatalova
Tatiana Shatalova
Nataliya R. KildeevaNataliya R. Kildeeva
Nataliya R. Kildeeva
Freeze-dried porous (0.05-0.06 g/cm3) composite materials were prepared from homogeneous molding compositions containing distilled water (95 wt. %), fine inorganic powders of calcium salts (2.5 wt. %) and sodium alginate (2.5 wt. %). Aqueous solution of calcium chloride (CaCl2) and aqueous mixed-anionic solution prepared by mixing solutions of (NH4)2CO3 and (NH4)2H2P2O7 taken in different proportions were used for syntheses of fine inorganic powders. Molar ratios (NH4)2Н2P2O7)/((NH4)2CO3+(NH4)2Н2P2O7) of salts used for mixed-anionic solutions preparation were established as 0 (reference powder), 0.02, 0.04, 0.08 and 0.16. Quantities of aqueous solutions of calcium chloride (CaCl2) was taken to provide molar ratio CaCl2/((NH4)2CO3+(NH4)2Н2P2O7) equal 1.00 (reference powder), 1.02, 1.04, 1.08 and 1.16. Phase composition of synthesized inorganic powders included calcium carbonate (CaCO3) (mostly vaterite) and quasi-amorphous phase of hydrated calcium pyrophosphate (Ca2P2O7 xH2O) . All synthesized powders contained adsorbed and occluded salts presented in the mother liquor after synthesis completed before separation of precipitate. Mother liquors were aqueous solutions of ammonium chloride (NH4Cl) (all syntheses) and calcium chloride (CaCl2) (syntheses from mixed-anionic solutions). As components of inorganic powders used as fillers in composite materials ammonium chloride (NH4Cl) and calcium chloride (CaCl2) provoked a partial cross-linking of sodium alginate in the stages of preparation of molding compositions, composite sample molding, freezing and freeze drying. All freeze-dried porous composite materials demonstrated high water absorption capacity 4700-9300%. The most pronounced cross-linked effect was observed for alginate matrixes loaded with powders synthesized at molar ratio CaCl2/((NH4)2CO3+(NH4)2Н2P2O7) equal 1.04 and 1.08 demonstrating lowest water absorption and dry mass-loss after dipping in distilled water for 12 hours. Prepared freeze-dried porous composite materials with alginate matrix and calcium carbonate and/or hydrated calcium pyrophosphate powders as a filler can be recommended for subsequent testing as extracellular matrix for soft/hard tissue repair, as wound dressings or bone defects fillers.