Filippov Yaroslav

Dr. Filippov Yaroslav

orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 April 2014 in JETP Letters
Verified
Journal Article
Closed access
PDF file
Marat GafurovMarat Gafurov
Marat Gafurov
TBT. Biktagirov
T. Biktagirov
BYBoris Yavkin
Boris Yavkin
GMGeorgy Vladimirovich Mamin
Georgy Vladimirovich Mamin
FYFilippov Yaroslav
Filippov Yaroslav
SOS. Orlinskii
S. Orlinskii
Synthesized by the wet chemical precipitation technique, hydroxyapatite (HAp) powders with the sizes of the crystallites of 20–50 nm and 1 μm were analyzed by different analytical methods. By means of electron paramagnetic resonance (EPR) it is shown that during the synthesis process nitrate anions from the reagents (byproducts) could incorporate into the HAp structure. The relaxation times and EPR parameters of the stable axially symmetric NO 3 2− paramagnetic centers detected after X-ray irradiation are measured with high accuracy. Analyses of high-frequency (95 GHz) electron-nuclear double resonance spectra from 1H and 31P nuclei and ab initio density functional theory calculations allow suggesting that the paramagnetic centers and nitrate anions as the precursors of NO 3 2− radicals preferably occupy PO 4 3− site in the HAp structure.

25 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
AKAndrey Kiselev
Andrey Kiselev
ISIrina Selezneva
Irina Selezneva
TSTatiana Shatalova
Tatiana Shatalova
YLYulia Lukina
Yulia Lukina
AKAlexander V. Knotko
Alexander V. Knotko
Ceramic samples based on β-calcium pyrophosphate β-Ca2P2O7 were prepared from powders of γ-calcium pyrophosphate γ-Ca2P2O7 with preset molar ratios Ca/P = 1, 0.975 and 0.95 using firing at 900, 1000, and 1100 °C. Calcium lactate pentahydrate Ca(C3H5O3)2⋅5H2O and monocalcium phosphate monohydrate Ca(H2PO4)2⋅H2O were treated in an aqua medium in mechanical activation conditions to prepare powder mixtures with preset molar ratios Ca/P containing calcium hydrophosphates with Ca/P = 1 (precursors of calcium pyrophosphate Ca2P2O7). These powder mixtures containing calcium hydrophosphates with Ca/P = 1 and non-reacted starting salts were heat-treated at 600 °C after drying and disaggregation in acetone. Phase composition of all powder mixtures after heat treatment at 600 °C was presented by γ-calcium pyrophosphate γ-Ca2P2O7 according to the XRD data. The addition of more excess of monocalcium phosphate monohydrate Ca(H2PO4)2·H2O (with appropriate molar ratio of Ca/P = 1) to the mixture of starting components resulted in lower dimensions of γ-calcium pyrophosphate (γ-Ca2P2O7) individual particles. The grain size of ceramics increased both with the growth in firing temperature and with decreasing molar ratio Ca/P of powder mixtures. Calcium polyphosphate (t melt = 984 °C), formed from monocalcium phosphate monohydrate Ca(H2PO4)2⋅H2O, acted similar to a liquid phase sintering additive. It was confirmed by tests in vitro that prepared ceramic materials with preset molar ratios Ca/P = 1, 0.975, and 0.95 and phase composition presented by β-calcium pyrophosphate β-Ca2P2O7 were biocompatible and could maintain bone cells proliferation.

26 August 2022 in Ceramics
Verified
Journal Article
Open access
PDF file
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
ВВвиктор иванович воробьев
виктор иванович воробьев
Nataliya R. KildeevaNataliya R. Kildeeva
Nataliya R. Kildeeva
TSTatiana Shatalova
Tatiana Shatalova
OTOtabek U Toshev
Otabek U Toshev
KLKonstantin Lyssenko
Konstantin Lyssenko
A mixture of abramis brama (freshwater bream), carassius carassius (crucian carp), and sander lucioperca (pike perch) scales was used for the preparation of fish scale powder containing constituents of organic and inorganic nature. The mixture of the mentioned fish scales was washed, dried, and ground for the preparation of fish scale powder. Vibration sieving was used to prepare fish scale powder enriched with inorganic components. According to thermal analysis data, this fish scale powder enriched with inorganic components included about 36.5 wt.% components removed when heating, primarily those of organic nature, and 63.5 wt.% mineral components. Inorganic powders consisting of hydroxyapatite and magnesium whitlockite were obtained via heat treatment of this fish scale powder at 800–1000 °C. Particles of these inorganic powders consisted of sintered grains with dimensions less than 100 nm after heat treatment at 800 °C, less than 200 nm after heat treatment at 900 °C, and 100–1000 nm after heat treatment at 1000 °C. Fish scale powder enriched with inorganic components as well as heat-treated inorganic powders consisting of hydroxyapatite and magnesium whitlockite can be recommended for the production of different materials, such as ceramics or composites.

15 December 2018 in Ceramics
Verified
Journal Article
Open access
PDF file
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
VPValery Putlayev
Valery Putlayev
FYFilippov Yaroslav
Filippov Yaroslav
TSTatiana Shatalova
Tatiana Shatalova
EKEvgeny Karpushkin
Evgeny Karpushkin
YSYury Shakhtarin
Yury Shakhtarin
Calcium phosphate powder was synthesized at room temperature from aqueous solutions of ammonium hydrophosphate and calcium acetate without pH adjusting at constant Ca/P molar ratio 1.5. Phase composition of the as-synthesized powder depended on the precursors concentration: At 2.0 M of calcium acetate in the starting solution, poorly crystallized hydroxyapatite was formed, 0.125 M solution of calcium acetate afforded brushite, and the powders synthesized from 0.25–1.0 M calcium acetate solutions were mixtures of the mentioned phases. Firing at 1100 °C led to complete elimination of the reaction by-products, yet the phase composition of the annealed compacted samples was the following: When 2.0 M solution of calcium acetate was used, the obtained ceramics consisted of β-Ca3(PO4)2, whereas at 0.125 to 1.0 M of calcium acetate, the ceramics was a mixture of β-Ca3(PO4)2 and β-Ca2P2O7. Synthesized calcium phosphate powders can be used as the powdered precursors for biocompatible bioresorbable composite ceramics production.

5 September 2022 in Ceramics
Verified
Journal Article
Open access
PDF file
MKMaksim Kaimonov
Maksim Kaimonov
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
TSTatiana Shatalova
Tatiana Shatalova
FYFilippov Yaroslav
Filippov Yaroslav
ITIrina Tikhomirova
Irina Tikhomirova
NSNikollay Sergeev
Nikollay Sergeev
The new approach to obtaining ceramic materials in the Na2O–CaO–SiO2–P2O5 system based on the binder—an aqueous solution of sodium silicate and filler—hydroxyapatite was shown in current research. After heat treatment at 500 °C and 700 °C, the ceramic samples included non-reacted hydroxyapatite Ca10(PO4)6(OH)2, β-rhenanite β-NaCaPO4 and sodium calcium silicophosphate Na2Ca4(PO4)2SiO4. An increase in temperature to 900 °C and 1100 °C allowed to obtain ceramic materials with the following phases: devitrite Na2Ca3Si6O16, β-rhenanite β-NaCaPO4, β-wollastonite β-CaSiO3, and silicon dioxide SiO2. The strength of ceramic samples rose with increasing temperature from ≈7.0 MPa (bending) and ≈7.2 MPa (compression) at 500 °C to ≈9.5 MPa (bending) and ≈31.6 MPa (compression) at 1100 °C. At the same time, the apparent density decreased from 1.71 g/cm3 to 1.15 g/cm3. The top of the compressive strength equal to 31.6 MPa was observed when the apparent density was 1.15 g/cm3. Obtained ceramics consisted of biocompatible phases, widely studied in the literature; thus, it confirms the possibility of using an aqueous solution of sodium silicate in medical materials science.

13 August 2022 in Ceramics
Verified
Journal Article
Open access
PDF file
KPKristina Peranidze
Kristina Peranidze
Tatiana V. SafronovaTatiana V. Safronova
Tatiana V. Safronova
FYFilippov Yaroslav
Filippov Yaroslav
GTGilyana Tugaeva
Gilyana Tugaeva
TSTatiana Shatalova
Tatiana Shatalova
Julietta V. RauJulietta V. Rau
Julietta V. Rau
Nanoscale powders of hydrated Ca2P2O7, CaCO3, and a product of mixed-anionic composition containing P2O74− and CO32− anions were synthesized from aqueous solutions of Ca(CH3COO)2, pyrophosphoric acid (H4P2O7), and/or (NH4)2CO3. Pyrophosphoric acid was previously obtained on the basis of the ion exchange process from Na4P2O7 solution and H+-cationite resin for further introduction into the reactions as an anionic precursor. The phase composition of powders after the syntheses was represented by bioresorbable phases of X-ray amorphous hydrated Ca2P2O7 phase, calcite and vaterite polymorphs of CaCO3. Based on synthesized powders, simple cylindrical constructions were prepared via mechanical pressing and fired in the temperature range of 600–800 °C. Surface morphology observation showed the presence of bimodal porosity with pore sizes up to 200 nm and 2 μm, which is likely to ensure tight particle packing and roughness of the sample surface required for the differentiation of osteogenic cells. Thus, the prepared ceramic samples can be further examined as model objects for bone tissue repair.