This paper investigates the current state of knowledge of the existing compaction testing methods for asphalt and identifies the limitations of these methods in using them during asphalt pavement compaction. Conventional spot tests that are carried out at limited spots for quality control (QC) and quality assurance (QA) of asphalt compaction often fail to ensure the uniformity of compaction. The differential approach using microwave sensors attached to the rollers can qualitatively indicate the optimum density during asphalt compaction; however, it requires spot density measurements to quantify the asphalt density achieved. intelligent compaction (IC) can be used to ensure the uniformity of asphalt compaction and to get real-time feedback. The current IC specifications for soil compaction are not suitable for asphalt compaction due to the viscoelastic nature of asphalt and the variation of asphalt mat temperature during compaction in the field. In addition, the state-of-the-art intelligent compaction measurement value (ICMVs) recorded during asphalt compaction does not correlate well with the asphalt density while it shows a reasonable correlation with asphalt stiffness. The effects of asphalt mat temperature and underlying support on ICMVs measured by IC rollers are identified as the potential causes of the poor correlation between ICMVs and spot density measurements. It is proposed that the relationship between asphalt modulus used in pavement designs and the ICMVs corrected for the effects of asphalt mat temperature and underlying support needs to be investigated in order to establish performance-based specifications for QA/QC of asphalt compaction. The emerging research on using GPR for asphalt density estimation is examined and the factors that affect the GPR measurements during asphalt pavement compaction are identified .
1 June 2017 in International Journal of Solids and Structures
This paper aims to develop measures to minimize the early-age fatigue damage of prematurely opened cement-treated bases (CTBs) due to repetitive heavy traffic loading. The four-point bending test was used in this study to characterize the early-age fatigue performance as well as the flexural properties of two different locally sourced granular materials stabilized with 3% general purpose (GP) cement. All the flexural tests were executed under stress-controlled mode. The fatigue test results evinced the existence of an endurance limit in cemented granular materials (CGMs) even at 7 days curing age. A stress-based fatigue performance model was developed for predicting the early-age fatigue performance of CGMs in service. In addition, the 7-day fatigue test data from this study were validated using existing CGM fatigue models. The numerical results obtained from the CIRCLY program indicated that the level of interaction between the axles of an axle configuration decreases with decreasing CTB layer thickness, resulting in increased pavement fatigue damage. It was also found that the asphalt cover over CTB required to prevent the occurrence of initial fatigue damage to the CTB decreases with increasing CTB modulus, subgrade strength, and CTB layer thickness. The limitations and simplifications in current pavement design and testing methods are also critically discussed and addressed on the basis of the results of this study.
1 December 2017 in Construction and Building Materials
Intelligent compaction (IC) is a technology that uses non-contact sensors to monitor and record the compaction level of geomaterials in real-time during road construction. However, current IC devices have several limitations: (i) they are unable to visualize or compare multiple intelligent compaction measurement values (ICMVs) in real-time during compaction; (ii) they are not retrofittable to different conventional rollers that exist in the field; (iii) they do not incorporate corrections for ICMVs reflecting variable field conditions; (iv) they are unable to integrate construction specifications as needed for performance-based compaction; and (v) they do not record all the key roller parameters for further compaction analysis. To address these issues, an innovative retrofittable platform with cutting-edge hardware and software was developed. This platform, called the intelligent compaction analyzer (ICA) platform, is effective at calculating conventional acceleration amplitude-based ICMVs and stiffness-based parameters and at displaying the spatial distributions of these parameters in a color-coded map in real-time during compaction.