In this research work, an ecofriendly approach was adopted for the treatment of two abundant liquid and solid agricultural wastes generated by olive mill industry: olive mill wastewater (OMWW) and raw olive pomace (ROP). It consists, firstly of the impregnation of ROP by OMWW and the conversion of the resulting impregnated sample (IROP) into hydrochars and biochars through hydrothermal carbonization (HTC) and slow pyrolysis methods, respectively. The impact of the treatment temperature on the physico-chemical properties of the derived chars was assessed by various analytical techniques. The hydrochars production yields were found to be higher than the biochars ones and associated to the lower temperature used. However, the generated biochars possess higher carbon percentage and lower volatile matter contents. In addition, the increase of the hydrothermal and pyrolysis carbonization temperatures shows an increase of macro-elements contents and a significant decrease of the O/C ratios which led to an enhancement of the high heating value for both hydrochars and biochars. The FTIR and Boehm titration analysis highlighted a significant alteration of the biochars surface chemistry compared to hydrochars evidenced by the lower amount of functional groups. The collected data emphasize on the efficient potential application of hydrochars and biochars for agricultural and environmental applications, respectively. Furthermore, it was noted that both chars have high energetic potentials and could be used for co-firing with coal in industrial boilers.
Olive mill wastes continue to be a management challenge due to the large volumes produced, particularly due to their toxicity and impacts on the environment. Thermal conversion through pyrolysis or hydrothermal carbonization techniques can detoxify wastes while conserving nutrient contents. In this work, we produced up-to-date data on olive mill waste flows in Spain, Tunisia, and Greece and characterized representative samples in the laboratory. Assays of thermal conversion of olive mill wastewaters and solid wastes were also performed to understand biochar yields and final properties, and the total quantities of nutrients contained were estimated. Of particular note were the quantities of potassium in Tunisian wastewaters, representing 0.6% of the total mass and an annual flow of approximately 5000 t, and in the Spanish solid wastes, an average of 1.7% of the total mass is potassium, representing an annual flow of approximately 23,000 t. Concerning phosphorus, Spanish solid wastes had the highest contents (0.1%), double that of other countries’ wastes. Annually, olive mill wastes from the three countries are estimated to contain approximately 35 × 103 tons of potassium and 2.6 × 103 tons of phosphorus. With this resource converted to biochar, each year more than 700 km2 of soils could be enriched in 0.2% carbon with biochar at an application rate of 7 t ha−1.
14 September 2020 in Biomass Conversion and Biorefinery
Characterization of the biofilm growing on stainless steel (SS) in untreated (UTUWW) and treated (TUWW) urban wastewaters was performed. In both media, the first phase of biofilm growth was aerobic, when the genera Caldimonas, Caulobacter, Terriglobus and Edaphobacter (iron oxidizing bacteria [IOB]) and the genera Bacillus, Sulfurimonas, Syntrophobacter and Desulfobacter (sulfur oxidizing bacteria [SOB]) were identified. In the second phase, established after immersion for 7 days, the high amount of EPS inhibited the access of oxygen and promoted the growth of anaerobic bacteria, which were the genus Shewanella (iron-reducing bacterium [IRB]) and the genera Desulfovirga, Desulfovibrio, Desulfuromusa, Desulfococcus, and Desulfosarcina (sulfate-reducing bacteria [SRB]). Electrochemical measurements showed that in the first stage, the aerobic bacteria and the high amount of EPS delayed the cathodic reduction of oxygen. However, in the second stage, EPS and the anaerobic bacteria promoted anodic dissolution.
In the present work, six biochars were produced from the pyrolysis of poultry manure at 400 °C and 600 °C (PM-B-400 and PM-B-600), and their post-modification with, respectively, iron chloride (PM-B-400-Fe and PM-B-600-Fe) and potassium permanganate (PM-B-400-Mn and PM-B-600-Mn). First, these biochars were deeply characterized through the assessment of their particle size distribution, pH, electrical conductivity, pH at point-zero charge, mineral composition, morphological structure, and surface functionality and crystallinity, and then valorized as biofertilizer to grow spring barley at pot-scale for 40 days. Characterization results showed that Fe- and Mn-based nanoparticles were successfully loaded onto the surface of the post-modified biochars, which significantly enhanced their structural and surface chemical properties. Moreover, compared to the control treatment, both raw and post-modified biochars significantly improved the growth parameters of spring barley plants (shoot and root length, biomass weight, and nutrient content). The highest biomass production was obtained for the treatment with PM-B-400-Fe, owing to its enhanced physico-chemical properties and its higher ability in releasing nutrients and immobilizing heavy metals. These results highlight the potential use of Fe-modified poultry manure-derived biochar produced at low temperatures as a sustainable biofertilizer for soil enhancement and crop yield improvement, while addressing manure management issues.