Backscatter mosaics based on a multi-frequency multibeam echosounder survey in the continental shelf setting of the North Sea were compared. The uncalibrated backscatter data were recorded with frequencies of 200, 400 and 600 kHz. The results showed that the seafloor appears mostly featureless in acoustic backscatter mosaics derived from 600 kHz data. The same area surveyed with 200 kHz reveals numerous backscatter anomalies with diameters of 10–70 m deviating between −2 dB and +4 dB from the background sediment. Backscatter anomalies were further subdivided based on their frequency-specific texture and were attributed to bioturbation within the sediment and the presence of polychaetes on the seafloor. While low frequencies show the highest overall contrast between different seafloor types, a consideration of all frequencies permits an improved interpretation of subtle seafloor features.

Many studies show that habitat complexity or habitat diversity plays a major role in biodiversity throughout different spatial scales: as structural heterogeneity increases, so does the number of available (micro-) habitats for the potential species inventory. The capability of housing species (even rare species) increases rapidly with increasing habitat heterogeneity. However, habitat complexity is not easy to measure in marine sublittoral sediments. In our study, we came up with a proposal to estimate sublittoral benthic habitat complexity using standard underwater video techniques. This tool was subsequently used to investigate the effect of habitat complexity on species richness in comparison to other environmental parameters in a marine protected area situated in the Fehmarn Belt, a narrow strait in the southwestern Baltic Sea. Our results show that species richness is significantly higher in heterogeneous substrates throughout all considered sediment types. Congruently, the presence of rare species increases with structural complexity. Our findings highlight the importance of the availability of microhabitats for benthic biodiversity as well as of the study area for regional ecosystem functioning.

Papenmeier, S.; Schrottke, K.; Bartholomä, A. and Flemming, B.W., 2013. Sedimentological and rheological properties of the water–solid bed interface in the Weser and Ems estuaries, North Sea, Germany: Implications for fluid mud classification. Fine, cohesive sediment suspensions are a common feature of estuarine environments. Generally, multilayer models are used to describe the vertical distribution of such sediments. Such conceptional models normally distinguish at least high suspended sediment concentrations (SSCs) as a topmost layer and a consolidated bed layer, often including an intermediate, fluid mud layer. Rheological, and in particular sedimentological properties are rarely included in these models. New data from two different estuaries provide new insights that can contribute toward the classification of near-bed cohesive sediments. The water–solid bed interfaces within the turbidity maximum zones of the Weser and Ems estuaries were sampled with 2–4-m-long cores. At 10-cm intervals, va...

The anthropogenic impact in the German Exclusive Economic Zone (EEZ) is high due to the presence of manifold industries (e.g., wind farms, shipping, and fishery). Therefore, it is of great importance to evaluate the different impacts of such industries, in order to enable reasonable and sustainable decisions on environmental issues (e.g., nature conservation). Bottom trawling has a significant impact on benthic habitats worldwide. Fishing gear penetrates the seabed and the resulting furrows temporarily remain in the sediment known as trawl marks (TM), which can be recognized in the acoustic signal of side-scan sonars (SSS) and multibeam echo sounders (MBES). However, extensive mapping and precise descriptions of TM from commercial fisheries at far offshore fishing grounds in the German EEZ are not available. To get an insight into the spatial patterns and characteristics of TM, approximately 4800 km² of high-resolution (1 m) SSS data from three different study sites in the German EEZ were analyzed for changes in TM density as well as for the geometry of individual TM. TM were manually digitalized and their density per square kilometer was calculated. In general, TM density was highest in August and October. Moreover, different gear types could be identified from investigating individual TM in SSS data. Beam trawl marks were observed to have widths of up to 22 m whereas otter board marks showed widths up to 6 m. The persistence of TM was estimated to 2–7 days minimum for all three sites based on the SSS data from 2015–2019. A maximum persistence could be defined at one site (Dogger Bank) and it was five months for the investigation period 2016–2017. Besides the main factors driving TM degradation (wave-base impact, sediment-type), different methods for TM detection (SSS, MBES, under-water video) are discussed. The study provides valuable information on the physical impact of bottom trawling on the seabed and can support existing monitoring strategies.