The operation modes of a plasmatron for powder coating spraying have been studied. The plasmatron has a node of annular input and a gasdynamic focusing of the powder, and the outlet holes of the nozzle-anode are made in the form of rectangular narrowing-expanding channels (No.34334 RK: IPC H05H 1/42). The dynamics and trajectories of the powder particles in the plasmatron were investigated. The paper analyzes the influence of plasmatron arc current and working gas flow rate on the structure and properties of the obtained coatings. It is established that the phase composition of the sprayed coatings and the initial powder is the same: the main phase is the compound TiN, in addition, the structure contains the phase TiO2. The results of tribological tests of the coatings under dry friction conditions according to the ball-on-disk scheme are presented. Within the framework of this study, it can be said, from the point of view of obtaining denser coatings with high performance characteristics, that the optimal modes of plasma spraying of TiN powder are a current of 250 A and the working gas flow rate of argon 34 L/min.
The technology for obtaining hydrofluoric acid and the peculiarities of its production were studied, and the physical and chemical properties of the waste were examined. Activators that accelerated the hardening of the anhydrite binder were selected. The process of recycling fluorine hydrite waste from the production of hydrofluoric acid at Ulba Metallurgical Plant JSC was studied, and anhydrite unburnt binder with a setting time of 30 min was obtained. On the basis of the obtained data, a technological scheme of anhydrite binder production was developed. The effectiveness of the technological scheme was confirmed experimentally. This work aimed to study the possibility of the integrated use of secondary and anthropogenic raw materials from Ulba Metallurgical Plant, which represents an important means of not only increasing production efficiency and economic benefits and reducing the irrational alienation of land resources, but also protecting against the pollution of water and air basins, as the environmental policy of UMP JSC is nowadays of great importance.
Fluorohypsum is a solid, large-tonnage waste generated during the production of hydrofluoric acid. The volume of accumulated waste in the world is hundreds of millions of tons, which makes its utilization an increasingly urgent task. This article presents the results of research aimed at the use of fluorohypsum as a component of building materials. On the basis of the obtained data, the technological scheme of manufacturing products based on anhydrite binder is developed. It was established that the introduction of specialized additives into gypsum–anhydrite mixtures significantly increases the bond strength with the base (up to four times). The mixture of gypsum and anhydrite with a 75/25 arrangement provides tensile strength of up to 4.3 MPa and bending strength of 1.8 MPa, which exceeds similar indicators for traditional building materials. An economic analysis has shown a 20–25% reduction in the cost of composite production compared to the use of natural gypsum, which provides cost savings and makes these materials competitive.
1 February 2020 in Izvestiya vysshikh uchebnykh zavedenii. Fizika
Проведена оценка возможности получения оксида гадолиния из отхода технологии переработки уран-гадолинийсодержащих материалов. В ходе проведения работ были опробованы различные способы получения оксида гадолиния. Проведен ряд экспериментов по отработке режимов получения оксида гадолиния методом двухстадийного осаждения оксалата. Разработана технологическая схема, по которой получен готовый продукт, пригодный для дальнейшего применения в технологии получения уран-гадолиниевых таблеток АО «УМЗ».
Beryllium-based intermetallic compounds, such as Be12Nb, are attracting growing interest for their high thermal stability and potential to replace pure beryllium as neutron reflectors and multipliers in both fission and future fusion reactors, with additional applications in metallurgy, aerospace, and hydrogen technology. The paper presents the results of an investigation of the thermal treatment and phase formation of the intermetallic compound Be12Nb from a mixture of niobium and beryllium powders in the temperature range of 800–1300 °C. The phase evolution was assessed as a function of sintering temperature and time. A nearly single-phase Be12Nb composition was achieved at 1100 °C, while decomposition into lower-order beryllides such as Be17Nb2 occurred at temperatures ≥1200 °C, indicating thermal instability of Be12Nb under vacuum. Careful handling of sintering in low vacuum minimized oxidation, though signs of possible BeO formation were noted. The findings complement and extend earlier reports on Be12Nb synthesis via plasma sintering, mechanical alloying, and other powder metallurgy routes, providing broader insight into phase formation and synthesis. These results provide a foundation for optimizing the manufacturing parameters required to produce homogeneous Be12Nb-based components and billets at an industrial scale. Additionally, they help define the operational temperature limits necessary to preserve the material’s phase integrity during application.
This work discusses the possibility of decomposing magnesium fluoride by ionized water vapor to form solid magnesium oxide and hydrogen gas in the reaction: MgF2 + H2O → MgO + 2HF. The technology and individual apparatuses of the plasma-chemical installation are described, and the influence of the fractional composition of magnesium fluoride powder on the productivity of the plasma conversion process is considered. To improve the efficiency of the plasma pyrolysis process, a method for making magnesium fluoride briquettes was developed. The completeness of the conversion process of magnesium fluoride to an oxide was evaluated by energy dispersive X-ray spectroscopy in the study of objects in scanning electron microscopy (SEM) and by X-ray diffractometry. It was found that the conversion process of magnesium fluoride to magnesium oxide has a relatively high degree of decomposition of magnesium fluoride fraction ≤75 µm. The use of the proposed processing method makes it possible to obtain pure magnesium oxide as a commercial product and to utilize fluorine-containing industrial waste.