Reduced titanium oxide structures are regarded as promising materials for various catalytic and optoelectronic applications. There is thus an urgent need for developing methods of controllable formation of crystalline nanostructures with tunable oxygen nonstoichiometry. We introduce the Extremely Low Oxygen Partial Pressure (ELOP) method, employing an oxygen getter in close vicinity to an oxide during thermal reduction under vacuum, as an effective bottom-up method for the production of nanowires arranged in a nanoscale metallic network on a SrTiO₃ perovskite surface. We demonstrate that the TiO nanowires crystallize in a highly ordered cubic phase, where single nanowires are aligned along the main crystallographic directions of the SrTiO₃ substrate. The dimensions of the nanostructures are easily tunable from single nanometers up to the mesoscopic range by varying the temperature of reduction. The interface between TiO and SrTiO₃ (metal and insulator) was found to be atomically sharp providing the unique possibility of the investigation of electronic states, especially since the high conductivity of the TiO nanostructures is maintained after room temperature oxidation. According to the growth model we propose, TiO nanowire formation is possible due to the incongruent sublimation of strontium and crystallographic shearing, triggered by the extremely low oxygen partial pressure (ELOP). The controlled formation of conductive nanowires on a perovskite surface holds technological potential for implementation in memristive devices, organic electronics, or for catalytic applications, and provides insight into the mechanism of nanoscale phase transformations in metal oxides. We believe that the ELOP mechanism of suboxide formation is suitable for the formation of reduced suboxides on other perovskite oxides and for the broader class of transition metal oxides.

Allvac 718Plus (718Plus) is a high strength, corrosion resistant nickel- based superalloy used for application in power generation, aeronautics and aerospace industry. The 718Plus microstructure consists of a γ matrix with γ’-Ni₃(Al,Ti) and some δ- Ni₃Nb phases as well as lamellar particles (η-Ni₃Ti, η*-Ni₆AlNb or Ni₆(Al,Ti)Nb) precipitated at the grain boundaries. The primary strengthening mechanism for this alloy is a precipitation hardening, therefore size and distribution of precipitates are critical for the performance of the alloy. The aim of this study was to characterize precipitates in the 718Plus superalloy using Scanning Transmission Electron Microscope combined with Energy Dispersive X-ray Spectroscopy (STEM-EDX) and Focused Ion Beam Scanning Electron Microscope (FIB-SEM). The STEM-EDX and FIB-SEM tomography techniques were used for 3D imaging and metrology of the precipitates. Transmission electron microscopy and EDX spectroscopy were used to reveal details of the 718Plus microstructure and allow determine chemical composition of the phases. The study showed that electron tomography techniques permit to obtain complementary information about microstructural features (precipitates size, shape and their 3D distribution) in the reconstructed volume with comparison to conventional particle analysis methods, e.g. quantitative TEM and SEM metallography

This article presents the results of an analysis regarding the microstructure, mechanical strength, and microhardness of two kinds of samples built through selective laser melting with Inconel 718, the most frequently used alloy in metal additive manufacturing due to its excellent mechanical properties. The sample geometry was made up of two types of lattice structures with spherical and hyperbolical stiffness elements. The goals of these studies are to determine how homogenization heat treatment influences the microhardness and the mechanical properties of the specimens and to identify the structure with the best mechanical properties. The analysis showed that heat treatment was beneficial because the regular dendritic structure disappears, the δ phase precipitates at the grain boundaries, and both the γ and γ″ phases dissolve. It has also been shown that the structures with hyperbolical stiffness elements have better compressive strength than the structures with the elliptical structures, with a 47.6% increase for the as-fabricated structures and an approximate 50% increase for the heat-treated structure.

The superalloys are usually used as structural material in jet engines due to their high-temperature stability and good endurance. Many components found in the hot-part of jet engines are of complex shape, therefore casting is utilized for to their production. One of the problems associated with the casting process of highly alloyed alloys, such as superalloys, is partitioning of alloying elements upon solidification. This segregation might lead to the formation of low melting temperature eutectics. Their presence in the material microstructure will have a negative effect on the weldability. Negative impact on weldability is one of the reasons why secondary phases should be avoided as microstructural elements in the welded materials. To eliminate such hazardous phases, the material should be subjected to a heat treatment with the aim of homogenizing the microstructure and chemical composition, which should enhance the weldability. The aim of this work was the application of analytical electron microscopy in combination with energy dispersive X-ray spectroscopy as well as tomographic techniques for qualitative and quantitative characterization of structural elements in as-cast Allvac 718Plus Ni-based superalloy subjected to later heat treatment. Alloy 718Plus is a newly developed superalloy in which the secondary Laves phase forms as a low-melting eutectic upon casting. The development of innovative materials for aeronautics and clean energy systems requires the use of modern research methods for structure characterization on the level from micro- to the nanoscale. The performed analysis, allowed identification of phases (Laves and η) occurring in interdendritic regions of as-cast Allvac 718Plus superalloy and analyzing their microstructure down to the atomic scale, which revealed their complex nature. The experiments and investigation show that advanced microscopic techniques and test methods in conjunction with tomographic techniques enable complementary information about solidified structures of the alloy to be obtained that can be useful for the understanding process of casting and welding of the Allvac 718Plus.