Byoungho Choi

Mr. Byoungho Choi


Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 May 2025 in Mathematics
Verified
Journal Article
Open access
PDF file
BCByoungho Choi
Byoungho Choi
MKMinkyu Kim
Minkyu Kim
Heungseob KimHeungseob Kim
Heungseob Kim
This study addresses the multi-robot task allocation (MRTA) problem for logistics robots operating in zone-picking warehouse environments. With the rapid growth of e-commerce and the Fourth Industrial Revolution, logistics robots are increasingly deployed to manage high-volume order fulfillment. However, efficiently assigning tasks to multiple robots is a complex and computationally intensive problem. To address this, we propose a five-step optimization framework that reduces computation time while maintaining practical applicability. The first step calculates and stores distances and paths between product locations using the A* algorithm, enabling reuse in subsequent computations. The second step performs hierarchical clustering of orders based on spatial similarity and capacity constraints to reduce the problem size. In the third step, the traveling salesman problem (TSP) is formulated to determine the optimal execution sequence within each cluster. The fourth step uses a mixed integer linear programming (MILP) model to allocate clusters to robots while minimizing the overall makespan. Finally, the fifth step incorporates battery constraints by optimizing the task sequence and partial charging schedule for each robot. Numerical experiments were conducted using up to 1000 orders and 100 robots, and the results confirmed that the proposed method is scalable and effective for large-scale scenarios.

1 November 2019 in Electronics Letters
Verified
Journal Article
Open access
PDF file
YCY.S. Cho
Y.S. Cho
PCP.H. Choi
P.H. Choi
KKK.H. Kim
K.H. Kim
JPJ.M. Park
J.M. Park
YHY.S. Hwang
Y.S. Hwang
BCByoungho Choi
Byoungho Choi
Vertical cell transistor is necessary to drastically reduce the chip size of the dynamic random access memory. This structure has a great advantage in terms of shrinkage, but it also has the disadvantage of increasing the OFF‐state current by causing floating body effect (FBE). For the first time, it is demonstrated that a stretched tunnelling diode, which consists of a p + layer next to the n + active layer in the buried body, leads to a drastically suppressed FBE. The OFF‐state current is sharply reduced by about seven orders compared with a conventional structure. Furthermore, the decrease in the OFF‐state current is at minimum when the length of the stretched p + region is approximately half the channel length ( L p / L =1/2).

1 December 2025 in Materials Research Express
Verified
Journal Article
Open access
GKGi hoon Kwon
Gi hoon Kwon
BCByoungho Choi
Byoungho Choi
DJDong Sul Jeon
Dong Sul Jeon
KAKyong Jun An
Kyong Jun An
KMKyoung Il Moon
Kyoung Il Moon
AlCrFeSi alloys have emerged as promising candidates for structural components requiring high strength, wear resistance, and thermal stability at elevated temperatures. To clarify the influence of processing conditions, elemental powders were synthesized by high-energy ball milling (HEBM) and consolidated via hot-press sintering (HPS) at 700 °C–1000 °C. Systematic characterization using XRD, SEM, hardness testing, and tribological evaluation revealed a strong dependence of densification and phase evolution on the sintering temperature. The optimum condition was found at 950 °C, where the alloys achieved nearly full densification (∼99.3%), refined microstructures with Al 13 Cr 2 and AlCr intermetallic phases, high hardness (∼495 HV), a reduced friction coefficient (0.37), and maximum fracture toughness of 4.1 MPa·m 1/2 . Further heating to 1000 °C caused grain coarsening and slight property degradation. These results highlight that precise control of the sintering temperature enables the fabrication of dense and wear-resistant AlCrFeSi alloys, providing useful guidance for the design of complex concentrated alloys for advanced high-temperature applications.

14 August 2026 in Drones
Verified
Journal Article
Open access
PDF file
Heungseob KimHeungseob Kim
Heungseob Kim
SYSeunghyeon Yu
Seunghyeon Yu
BCByoungho Choi
Byoungho Choi
Underwater vehicles must operate efficiently within the limits of their onboard resources, and travel time is a primary operational objective for extending submerged endurance and range. Ocean currents significantly affect vehicle motion and travel time, either aiding or impeding propulsion depending on their direction and magnitude. This study proposes a cell-based, ocean-current-aware cost formulation for offline three-dimensional (3D) underwater path planning. A 3D grid map integrating ocean current vectors and underwater terrain is constructed, and rather than modifying a specific search algorithm, the proposed approach defines a travel-time-based cost at the cell-transition level by incorporating current effects into the vehicle’s effective velocity. Because the cost operates at the cell-transition level, it can be adopted by standard grid-search planners such as Dijkstra’s, A*, and D* without modification. Simulation experiments over the Tsushima–Jeju corridor using two measured current fields from the Korea Hydrographic and Oceanographic Agency show that identical fields aided westbound transits (−2.4% and −4.4% travel time versus a current-unaware baseline) while opposing eastbound transits (+1.3% and +1.8%), with the planner exploiting favorable flows and detouring to mitigate adverse flows; these effects amplified roughly threefold as the vehicle speed decreased from 15 to 6 knots. A* and Dijkstra’s algorithms returned identical optimal costs under the same formulation, confirming planner independence. The results demonstrate that embedding measured current information at the map level yields realistic, condition-dependent, minimum-travel-time routes for offline mission planning.

7 April 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
GKGi hoon Kwon
Gi hoon Kwon
BCByoungho Choi
Byoungho Choi
YSYun-Ho Son
Yun-Ho Son
KMKyoung Il Moon
Kyoung Il Moon
The effect of Be content on precipitation behavior and property evolution in Cu–Be alloys was systematically investigated under identical aging conditions at 320 °C. Increasing Be content significantly accelerates precipitation kinetics, leading to a more advanced precipitation state without altering the precipitation pathway. Microstructural analyses using XRD, TEM, and SAED confirm that precipitation evolution is strongly governed by Be content. Hardness and tensile strength increase with Be content due to enhanced precipitation strengthening, whereas electrical conductivity decreases due to residual solute Be, resulting in a clear strength–conductivity trade-off. The precipitation fraction (φ), derived from electrical conductivity, quantitatively describes precipitation kinetics and shows good agreement with Avrami behavior. The kinetic constant increases while the Avrami exponent decreases with increasing Be content, indicating a transition toward a growth-dominated regime. These results demonstrate that Be content governs precipitation kinetics and resulting properties, providing a guideline for optimizing the strength–conductivity balance in Cu–Be alloys.