Hasan Hamza H Hijji

Dr. Hasan Hamza H Hijji

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 June 2025 in Materials
Verified
Journal Article
Open access
PDF file
Mohammad S. AlsoufiMohammad S. Alsoufi
Mohammad S. Alsoufi
SBSaleh Bawazeer
Saleh Bawazeer
MAMohammed Alhazmi
Mohammed Alhazmi
HHHasan Hamza H Hijji
Hasan Hamza H Hijji
HAHani Alhazmi
Hani Alhazmi
HAHazzaa F Alqurashi
Hazzaa F Alqurashi
Attaining dimensional accuracy in CNC-machined parts is essential for high-precision manufacturing, especially when working with materials that exhibit varying mechanical and thermal characteristics. This research provides a thorough experimental comparison of manual and automated metrological systems, specifically the Digital Vernier Caliper (DVC) and Coordinate Measuring Machine (CMM), as applied to five different engineering alloys through five progressively machined axial zones. The study assesses absolute error, relative error, standard deviation, and measurement repeatability, factoring in material hardness, thermal conductivity, and surface changes due to machining. The results indicate that DVC performance is significantly affected by operator input and surface irregularities, with standard deviations reaching 0.03333 mm for Bronze C51000 and relative errors surpassing 1.02% in the initial zones. Although DVC occasionally showed lower absolute errors (e.g., 0.206 mm for Aluminum 6061), these advantages were countered by greater uncertainty and poor repeatability. In comparison, CMM demonstrated enhanced precision and consistency across all materials, with standard deviations below 0.0035 mm and relative errors being neatly within the 0.005–0.015% range, even with challenging alloys like Stainless Steel 304. Furthermore, a Principal Component Analysis (PCA) was conducted to identify underlying measurement–property relationships. The PCA highlighted clear groupings based on sensitivity to error in manual versus automated methods, facilitating predictive classification of materials according to their metrological reliability. The introduction of multivariate modeling also establishes a new framework for intelligent metrology selection based on material characteristics and machining responses. These results advocate for using CMM in applications requiring precise tolerances in the aerospace, biomedical, and high-end tooling sectors, while suggesting that DVC can serve as an auxiliary tool for less critical evaluations. This study provides practical recommendations for aligning measurement techniques with Industry 4.0’s needs for accuracy, reliability, and data-driven quality assurance.

24 July 2024 in Journal of Umm Al-Qura University for Engineering and Architecture
Verified
Journal Article
Open access
PDF file
HBHusam Bakhtar
Husam Bakhtar
NANawaf Alsahafi
Nawaf Alsahafi
MAMosaaed Almehmadi
Mosaaed Almehmadi
MAMohamed Ahmed
Mohamed Ahmed
MIMajed Ismail
Majed Ismail
MAMohammed W. Alhazmi
Mohammed W. Alhazmi
Reducing axial fan noise is crucial in residential, commercial, and industrial applications. This study explores how attaching different add-on designs to axial fans reduces aerodynamic noise. Eight design cases were examined, including extending the outlet and inlet ducts, using Chevron nozzles, placing internal spherical balls in staggered and straight patterns, applying a wavy inner wall treatment, and combining some of these nozzle designs. CFD and acoustic analyses were performed using Ansys Fluent 2022 R1. Noise reduction was measured at the nozzle outlet in each design case. All nozzle modifications reduced noise levels, with noise reductions ranging from 3 to 10% at the blade tip and 26–55% at the outlet. As an add-on to existing fan cases, the design cases investigated in this study can potentially improve the acoustic environment in various settings. The findings of this study can contribute to the development of quieter axial fans.

6 July 2025 in Machines
Verified
Journal Article
Open access
PDF file
Mohammad S. AlsoufiMohammad S. Alsoufi
Mohammad S. Alsoufi
SBSaleh Bawazeer
Saleh Bawazeer
MAMohammed Alhazmi
Mohammed Alhazmi
HAHani Alhazmi
Hani Alhazmi
HHHasan Hamza H Hijji
Hasan Hamza H Hijji
Accurate measurement uncertainty quantification and its propagation are critical for dimensional compliance in precision manufacturing. This study presents a novel framework that examines the evolution of measurement error along the axial length of CNC-turned components, focusing on spatial and material-specific factors. A systematic experimental comparison was conducted between a manual Digital Vernier Caliper (DVC) and an automated Coordinate Measuring Machine (CMM) using five engineering materials: Aluminum Alloy 6061, Brass C26000, Bronze C51000, Carbon Steel 1020 Annealed, and Stainless Steel 304 Annealed. Dimensional measurements were taken from five consecutive machining zones to capture localized metrological behaviors. The results indicated that the CMM consistently achieved lower expanded uncertainty (as low as 0.00166 mm) and minimal propagated uncertainties (≤0.0038 mm), regardless of material hardness or cutting position. In contrast, the DVC demonstrated significantly higher uncertainty (up to 0.03333 mm) and propagated errors exceeding 0.035 mm, particularly in harder materials and unsupported zones affected by surface degradation and fixture variability. Root-sum-square (RSS) modeling confirmed that manual measurements are more prone to operator-induced error amplification. While the DVC sometimes recorded lower absolute errors, its substantial uncertainty margins hampered measurement reliability. To statistically validate these findings, a two-way ANOVA was performed, confirming that both the measurement system and machining zone significantly impacted uncertainty, as well as their interaction. These results emphasize the importance of material-informed and zone-sensitive metrology, highlighting the advantages of automated systems in sustaining measurement repeatability and dimensional stability in high-precision applications.

15 February 2025 in Journal of Umm Al-Qura University for Engineering and Architecture
Verified
Journal Article
Open access
PDF file
MAMohammed W. Alhazmi
Mohammed W. Alhazmi
MAMohammad S. Alsoufi
Mohammad S. Alsoufi
SBSaleh A. Bawazeer
Saleh A. Bawazeer
HHHasan Hamza H Hijji
Hasan Hamza H Hijji
HAHani Alhazmi
Hani Alhazmi
HAHazzaa F. Alqurashi
Hazzaa F. Alqurashi
Studying cooling fans’ vibration, noise, and airflow characteristics is crucial for several practical and performance-related reasons, particularly in electronics, automotive, HVAC, and manufacturing industries. Therefore, the present study examines a cooling fan’s vibration, noise, and airflow characteristics subjected to artificial defects that usually might occur in practice, including holes, vertical, and horizontal cracks. Frequency-domain and time-domain analyses identified horizontal cracks as the most disruptive, producing a peak vibration amplitude of 0.136 ± 0.003 m/s2 at $$3\times BPF$$ 3 × B P F (675 Hz) and a 74.2 ± 1 dB noise level. Vertical cracks resulted in 0.0333 ± 0.002 m/s2 and 73.8 ± 1 dB, while artificial holes generated 0.08791 ± 0.002 m/s2 and 67.3 ± 1 dB. Airflow velocity decreased significantly across all defect types, with horizontal cracks reducing it from 2.55 ± 0.05 m/s to 2.1 ± 0.05 m/s. These findings demonstrate the critical impact of defect type and severity on system performance. The study underscores the importance of incorporating uncertainty analysis into vibration and noise diagnostics to ensure accurate fault detection and efficient cooling system maintenance.

24 October 2026 in Coatings
Verified
Journal Article
Open access
PDF file
SAsaood ali
saood ali
Sung-Ho HongSung-Ho Hong
Sung-Ho Hong
Rendi KurniawanRendi Kurniawan
Rendi Kurniawan
RSROHIT KUMAR SINGH
ROHIT KUMAR SINGH
Khaled HamdyKhaled Hamdy
Khaled Hamdy
HHHasan Hamza H Hijji
Hasan Hamza H Hijji
Aluminum and titanium alloys remain the structural backbone of modern airframes, engines, and landing systems because of their favorable strength-to-weight ratios. However, their service life is frequently limited, not by corrosion or wear acting independently, but by the synergistic interaction between the two under tribocorrosion conditions. This critical review evaluates the post-2021 literature on single-function coatings such as conversion coatings, plasma electrolytic oxidation, thermal spray deposits, diamond-like carbon, and PVD hard coatings; engineered surface textures produced via laser, chemical, electrochemical, and mechanical routes; and texture-coating hybrid architectures developed for aerospace-grade aluminum alloys and Ti-6Al-4V. Particular attention is given to the influence of additive-manufacturing defects and the post-processing history on coating continuity and surface functionality, together with recent developments in multiphysics modeling and machine-learning-assisted process design. The critical assessment shows that hybrid architectures provide the complimentary benefits when the texture geometry, coating continuity, interfacial adhesion, load-bearing capacity, and fatigue integrity are designed concurrently. Nevertheless, their apparent advantages have not yet been demonstrated consistently under simultaneous corrosion-wear loading and service-representative thermal, vibrational, and environmental conditions. Inconsistent test protocols, short-duration coupon studies, limited fatigue assessments, and insufficient validation based on complex geometries remain the principal barriers to aerospace qualification. Future progress therefore requires standardized tribocorrosion testing, damage-tolerant chromium-free systems, the co-qualification of additively manufactured substrates and surface treatments, and experimentally validated, uncertainty-aware modeling frameworks.

18 March 2025 in Journal of Umm Al-Qura University for Engineering and Architecture
Verified
Journal Article
Open access
PDF file
MAMohammed W. Alhazmi
Mohammed W. Alhazmi
MAMohammad S. Alsoufi
Mohammad S. Alsoufi
SBSaleh A. Bawazeer
Saleh A. Bawazeer
HHHasan Hamza H Hijji
Hasan Hamza H Hijji
HAHani Alhazmi
Hani Alhazmi
HAHazzaa F. Alqurashi
Hazzaa F. Alqurashi