Attaining dimensional accuracy in CNC-machined parts is essential for high-precision manufacturing, especially when working with materials that exhibit varying mechanical and thermal characteristics. This research provides a thorough experimental comparison of manual and automated metrological systems, specifically the Digital Vernier Caliper (DVC) and Coordinate Measuring Machine (CMM), as applied to five different engineering alloys through five progressively machined axial zones. The study assesses absolute error, relative error, standard deviation, and measurement repeatability, factoring in material hardness, thermal conductivity, and surface changes due to machining. The results indicate that DVC performance is significantly affected by operator input and surface irregularities, with standard deviations reaching 0.03333 mm for Bronze C51000 and relative errors surpassing 1.02% in the initial zones. Although DVC occasionally showed lower absolute errors (e.g., 0.206 mm for Aluminum 6061), these advantages were countered by greater uncertainty and poor repeatability. In comparison, CMM demonstrated enhanced precision and consistency across all materials, with standard deviations below 0.0035 mm and relative errors being neatly within the 0.005–0.015% range, even with challenging alloys like Stainless Steel 304. Furthermore, a Principal Component Analysis (PCA) was conducted to identify underlying measurement–property relationships. The PCA highlighted clear groupings based on sensitivity to error in manual versus automated methods, facilitating predictive classification of materials according to their metrological reliability. The introduction of multivariate modeling also establishes a new framework for intelligent metrology selection based on material characteristics and machining responses. These results advocate for using CMM in applications requiring precise tolerances in the aerospace, biomedical, and high-end tooling sectors, while suggesting that DVC can serve as an auxiliary tool for less critical evaluations. This study provides practical recommendations for aligning measurement techniques with Industry 4.0’s needs for accuracy, reliability, and data-driven quality assurance.
This study presents a novel hybrid intelligent framework integrating fuzzy logic and artificial neural networks (ANN) to model the erosion-corrosion behavior of glass-fiber-reinforced pipes (GRP) under harsh operating conditions. Experimental data encompassing multiple operational parameters—including abrasive sand concentrations (250 g, 400 g, 500 g), flow rates (0.0067 m3/min, 0.01 m3/min, 0.015 m3/min), chlorine content (0–10 wt.%), and exposure times (1–5 h)—were utilized to develop the computational models. The fuzzy logic system effectively captured qualitative expert knowledge and uncertainty in material degradation processes, while ANN models provided quantitative predictions of erosion and corrosion rates. Results demonstrated good prediction accuracy, with R2 values of 0.81 for corrosion rate and moderate prediction accuracy 0.56 for erosion rate. The analysis revealed that flow rate (correlation: 0.6) and fuzzy severity (0.6) were the most influential parameters, followed by chlorine content (0.41) and sand concentration (0.32). The hybrid model identified optimal operating conditions to minimize material degradation: low sand concentration (250 g), low flow rate (0.0067 m3/min), absence of chlorine, and shorter exposure times. This intelligent modeling approach provides a powerful tool for predictive maintenance, operational optimization, and service life prediction of GRP systems in aggressive environments, bridging the gap between experimental data and computational intelligence for enhanced material performance assessment.
We study slow magnetoacoustic waves in a thin, gravitationally stratified flux tube filled with a strongly ionised two-fluid plasma. The tube is driven at its base by a train of pulses that arrive at random times and carry random amplitudes. Arrival times form a Poisson process. Because the governing Klein–Gordon equation is linear, every realisation has an exact Green’s function representation. Campbell’s theorem then gives the mean, the cumulants, the autocovariance and the power spectrum of the ion velocity in closed form. The stratified tube acts on the driver spectrum as a filter that attenuates frequencies below the ion cut-off Ωion and passes the rest unchanged. We prove that the spectral maximum sits at exactly Ωion above a critical height , and below it the maximum is at zero frequency. For a gamma-shaped pulse of width we find . The autocovariance oscillates at Ωion and decays as s−3/2 at large lag s, so a random driver produces a quasi-periodic signal at the cut-off with algebraically decaying oscillatory correlations. The neutrals, dragged by the ions, carry the same signal. Monte Carlo simulations and a finite-difference solver confirm the analytical results.
6 October 2026 in Journal of Materials Research and Technology