Takafumi Fujimoto

Dr. Takafumi Fujimoto

orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2014 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
TFTakafumi Fujimoto
Takafumi Fujimoto
KJKozo Jono
Kozo Jono
A wideband printed rectangular monopole antenna for circularly polarised wave is proposed. The radiation characteristics of the wideband circular polarisation are achieved by designing the antenna asymmetrically. With simulations, the relationships between the antenna's geometrical parameters and the antenna's characteristics (axial ratio of circularly polarised wave and return loss) are clarified. The operational principle for wideband circular polarisation is explained by the simulated electric current distributions. Moreover, the simulated axial ratio, return loss, radiation patterns and gain are compared with the measured results. The simulated and measured bandwidths (3 dB axial ratio with a 10 dB return loss) are ∼56.2% (1.78–3.17 GHz) and 51.4% (1.82–3.08 GHz), respectively.

24 June 2021 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
CGChai-Eu Guan
Chai-Eu Guan
TFTakafumi Fujimoto
Takafumi Fujimoto
SIShohei Iwasaki
Shohei Iwasaki
In this letter, the design and experimental validation of polarization-agile circular polarized antenna are presented. The antenna is comprised of a patch antenna with truncated slits and two proximity feedlines. The antenna produces a vertical linear polarized wave when it is fed by a proximity feedline. Horizontal linear polarized wave is then generated by applying a potential difference between two proximity feedlines. The quadrature phase difference between two orthogonal polarized waves is created by adding truncated slits into the patch antenna. By swapping the polarity of the proximity feedlines, polarization sense can be changed. The distributed circuit model is presented to describe the working mechanism of the antenna. Patch antenna with circular polarization agility is then validated through passive-type and active-type switching circuits. The measured axial ratio bandwidth is 4.085% (100 MHz), and the fractional impedance bandwidth is greater than 7% for the left-handed and right-handed circular polarized radiations.

24 December 2019 in Electronics
Verified
Journal Article
Open access
PDF file
CGChai-Eu Guan
Chai-Eu Guan
TFTakafumi Fujimoto
Takafumi Fujimoto
This paper describes a compact patch antenna intended for medical body area network. The antenna is fed using a proximity coupling scheme to support the antenna that radiates in the free space and on the human body at the 2.45 GHz ISM band. The conductor plane is placed 2 mm or 0.0163λ0 (λ0 is free space wavelength at 2.45 GHz) below the antenna to reduce backward radiation to the human body. Separation distance must be kept above 2 mm, otherwise, gain of the proposed antenna decreases when antenna is situated on the human body. The L-shape feed line is introduced to overcome impedance mismatch caused by the compact structure. The coupling gap between the proposed antenna and the length of the L-shape feed line are optimized to generate dual resonances mode for wide impedance bandwidth. Simulation results show that specific absorption rate (SAR) of the proposed antenna with L-shape feed line is lower than conventional patch antenna with direct microstrip feed line. The proposed antenna achieves impedance bandwidth of 120 MHz (4.89%) at the center frequency of 2.45 GHz. The maximum gain in the broadside direction is 6.2 dBi in simulation and 5.09 dBi in measurement for antenna in the free space. Wide impedance bandwidth and radiation patterns insensitive to the presence of human body are achieved, which meets the requirement of IoT-based wearable sensor.

13 October 2023 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
ZPZin Mar Phyo
Zin Mar Phyo
TFTakafumi Fujimoto
Takafumi Fujimoto
CGChai‐Eu Gaun
Chai‐Eu Gaun
In this study, a compact wideband circularly polarised Multiple Input Multiple Output (MIMO) antenna with the two parasitic elements is proposed. The printed monopole antenna for wideband circular polarisation proposed in authors' previous study is used as an antenna element. One‐sided substrate reflector is installed at the back side of the antenna, positioned 0.2λ 0 away, to improve the gain. The circularly polarised radiation, deteriorated by the influence of mutual coupling of two antenna elements and reflector, is improved by deploying two parasitic elements on the bottom layer of the antenna's substrate. The antenna's size is 0.99λ 0 × 0.32λ 0 and the reflector's size is 1.41λ 0 × 0.82λ 0 (λ 0 is the free‐space wavelength at lowest operating frequency). The measured bandwidth of 10 dB impedance with a 3 dB axial ratio is 33.49% from 3.53 to 4.95 GHz, which can be utilised for sub‐6 GHz 5G applications. The simulated and experimental results are compared to validate the antenna characteristics.

1 March 2019
Verified
Conference Paper
Closed access
HWHongyan Wang
Hongyan Wang
YIYoichi Ishizuka
Yoichi Ishizuka
TFTakafumi Fujimoto
Takafumi Fujimoto
We consider the energy efficiency for wireless sensor networks (WSNs) where all the nodes operate on batteries so that the total energy consumption should be minimized. One feasible and effective approach is to treat several individual single-antenna nodes which cooperative at the transmitter and receiver as multiple-antenna, i.e., cooperative MIMO. In this context, for the given bit error rate, we first analyze the total energy consumption under the MPSK modulation scheme by using space time block coding in the cooperative MIMO WSNs. Meanwhile, the upper bound of total energy consumption will be deduced. For both short and long transmission distance, we show the trend of the total energy consumption over the constellation size and obtain the optimal constellation size especially achieving the lowest system energy consumption. Additionally, the total energy consumption can be significantly saved by utilizing cooperative MIMO especially at long transmission distance.

1 March 2015 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
TFTakafumi Fujimoto
Takafumi Fujimoto
YYYuta Yoshitake
Yuta Yoshitake
A stacked patch microstrip antenna combined with a stacked ring microstrip antenna is proposed for quadruple band operation. The two antennas (a stacked patch microstrip antenna and a stacked ring microstrip antenna) are excited by an L ‐probe feed. The impedance bandwidth is enhanced by using double resonance at all frequency bands. With simulations, the relationships between the antenna's geometrical parameters and operational frequencies are clarified. The operational principle for quadruple band is explained by the simulated electric currents. The antenna is designed for Wi‐Fi (2.45/5.25/5.6 GHz bands) and mobile WiMAX (3.5 GHz band).