This letter presents a reflective-type phase shifter with single-stage varactor diodes at the reflective networks. Dual-branch switching network is proposed and cascaded to the output of the phase shifter. The switching network is composed of a quarter-wavelength transmission line branch and a phase inverter branch. Phase inverter produces additional 180° phase delay to the phase shifter. A single branch in the switching network is selected and directed to the output port one at a time. Simulations and experimental results demonstrate that insertion loss of the proposed phase shifter is constant, irrespective of branch chosen. The measured insertion loss variation is less than ±0.5 dB over phase shift tuning range of 360° at 2.45 GHz.
24 June 2021 in IEEE Antennas and Wireless Propagation Letters
In this letter, the design and experimental validation of polarization-agile circular polarized antenna are presented. The antenna is comprised of a patch antenna with truncated slits and two proximity feedlines. The antenna produces a vertical linear polarized wave when it is fed by a proximity feedline. Horizontal linear polarized wave is then generated by applying a potential difference between two proximity feedlines. The quadrature phase difference between two orthogonal polarized waves is created by adding truncated slits into the patch antenna. By swapping the polarity of the proximity feedlines, polarization sense can be changed. The distributed circuit model is presented to describe the working mechanism of the antenna. Patch antenna with circular polarization agility is then validated through passive-type and active-type switching circuits. The measured axial ratio bandwidth is 4.085% (100 MHz), and the fractional impedance bandwidth is greater than 7% for the left-handed and right-handed circular polarized radiations.
This paper describes a compact patch antenna intended for medical body area network. The antenna is fed using a proximity coupling scheme to support the antenna that radiates in the free space and on the human body at the 2.45 GHz ISM band. The conductor plane is placed 2 mm or 0.0163λ0 (λ0 is free space wavelength at 2.45 GHz) below the antenna to reduce backward radiation to the human body. Separation distance must be kept above 2 mm, otherwise, gain of the proposed antenna decreases when antenna is situated on the human body. The L-shape feed line is introduced to overcome impedance mismatch caused by the compact structure. The coupling gap between the proposed antenna and the length of the L-shape feed line are optimized to generate dual resonances mode for wide impedance bandwidth. Simulation results show that specific absorption rate (SAR) of the proposed antenna with L-shape feed line is lower than conventional patch antenna with direct microstrip feed line. The proposed antenna achieves impedance bandwidth of 120 MHz (4.89%) at the center frequency of 2.45 GHz. The maximum gain in the broadside direction is 6.2 dBi in simulation and 5.09 dBi in measurement for antenna in the free space. Wide impedance bandwidth and radiation patterns insensitive to the presence of human body are achieved, which meets the requirement of IoT-based wearable sensor.
This Letter presents a radio‐frequency energy storage solution for monitoring corrosion on bridge in wireless sensor network system. In this monitoring system, wireless terminals and sensors are installed on the bridges to monitor surface corrosion remotely. The proposed energy storage module to supply power to the sensors consists of a rectifier, a supercapacitor, and a DC–DC boost converter. The rectifier circuit is designed to convert 920 MHz RF energy to DC source. Experimental results demonstrate that the harvested energy can power up the sensor nodes for several times in a week, at input power density of 0.81 μW/cm 2 .
In this paper, a printed hybrid-mode antenna for dual-band circular polarization (CP) is proposed. In the proposed antenna, one T-shaped element is fed by a coplanar waveguide and one L-shaped element is loaded to the ground plane. The relationship between the antenna’s geometric parameters and the circular polarization characteristic (axial ratio) is examined through electric current distribution and radiation field components. In addition, the antenna’s resonant modes are investigated through characteristic mode analysis (CMA). Through parametric studies, the range of two frequency ratios is explored, revealing that the antenna operates as a dual-band single-sense CP antenna, even in ranges where the two frequency ratios (the ratio of high frequency to low frequency) are smaller compared to antennas in other studies. The proposed antenna has a frequency ratio of less than 1.5 between the two frequencies and can be flexibly designed. The proposed antenna is designed for the 2.5 GHz band and 3.5 GHz band. The measured bandwidths of 10 dB impedance with a 3 dB axial ratio are 2.35–2.52 GHz and 3.36–3.71 GHz, respectively.
12 July 2023 in IET Microwaves, Antennas & Propagation
A compact printed hybrid‐mode antenna for dual‐band dual‐sense circular polarisation (CP) has been proposed. To achieve dual‐band dual‐sense CP, a hybrid mode produced by an L‐shaped element and a loop element is used. In the lower frequency band, the left‐handed CP is radiated by a vertical electric field from the L‐shaped element and a horizontal electric field from the loop element. In the higher frequency band, the right‐handed CP is radiated by a horizontal electric field from the L‐shaped element and a vertical electric field from the loop element. Both the L‐shaped and the loop elements produce resonances in the lower and higher frequency bands. The operational principle for dual‐band dual‐sense CP is clarified using the simulated orthogonal components of the electric fields and the simulated electric current distributions. Parametric studies are discussed in the design procedure. The simulated and measured input reflection coefficient, axial ratio, absolute gain, and radiation pattern are presented. The measured bandwidths of −10dB‐input reflection coefficient with a 3dB‐axial ratio are 2.37–2.55 GHz (7.32%) in the lower frequency band and 3.38–3.70 GHz (9.04%) in the higher frequency band. The antenna size is 0.0741 λ2.452 and 0.151 λ3.52 ( λf is a wavelength at f GHz).