Mustafa Cagri Bayir

Mr. Mustafa Cagri Bayir

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 March 2021 in IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control
Verified
Journal Article
Closed access
NGNamik Kemal Gozuacik
Namik Kemal Gozuacik
MBMustafa Cagri Bayir
Mustafa Cagri Bayir
EMEbru Menşur
Ebru Menşur
Sedat AlkoySedat Alkoy
Sedat Alkoy
In this study, effects of rare-earth elements such as Nd, Gd, and Ce on the structural and the electrical properties of lead-free bismuth sodium potassium barium titanate Bi0.487Na0.427K0.06Ba0.026TiO3 (0.854BNT–0.12BKT–0.026BT) (BNKBT) ceramics have been investigated in detail. Solid-state reaction method was used to prepare undoped, 1.0 mol% Nd, 1.0 mol% Gd, 1.0 mol%, 2.1 mol%, and 2.7 mol% Ce doped BNKBT ceramic powder compositions. A pure single perovskite structure was observed in the XRD patterns for all the BNKBT ceramic systems, although doping was found to cause changes in the peak splitting and peak positions due to their site preference. The Curie temperatures have not shifted significantly with doping, but the relative permittivity values were found to have increased. The non-ergodic normal ferroelectric character of undoped BNKBT ceramic switched to an ergodic relaxor character at room temperature with Nd, Gd, and Ce doping with pinched polarization vs electric field hysteresis loops. Increased field induced strain levels were observed in the doped BNKBT ceramics with 1 mole% Ce doping yielding a giant field induced strain of 0.38% under an E-field of 65 kV/cm. Nd-doping, on the other hand, resulted in the highest releasable energy density of 0.64 J/cm3 at 65 kV/cm. Consequently, the rare-earth doped BNKBT ceramics were found to be promising for both digital actuator and high energy density capacitor applications due to their favorable electrical properties.

12 August 2020 in Journal of Applied Physics
Verified
Journal Article
Open access
PDF file
MMMatej Makarovic
Matej Makarovic
MBMustafa Cagri Bayir
Mustafa Cagri Bayir
Hana UrsicHana Ursic
Hana Ursic
ABAndraž Bradeško
Andraž Bradeško
Tadej RojacTadej Rojac
Tadej Rojac
Despite their primary importance in modern nanoelectronics, conductive domain walls (DWs) can also have a marking effect on the macroscopic response of polycrystalline ferroelectrics. In particular, a large nonlinear piezoelectric response at sub-Hz driving-field frequencies has been previously observed in BiFeO3, which was linked to the conductive nature of the DWs but whose exact origin has never been explained. In this study, by carefully designing the local conductivity in BiFeO3 using chemical doping, we found that the low-frequency piezoelectric nonlinearity is only observed in the sample with a large fraction of conductive DWs. Supported by nonlinear Maxwell–Wagner modeling, we propose that this large response originates from DW displacements inside a specific set of grains or grain clusters in which the internal electric fields are enhanced due to M-W effects. We thus show that these effects likely arise due to the pronounced local anisotropy in the electrical conductivity, varying from grain to grain, whose origin lies in the conductive DWs themselves. The results demonstrate the possibility of controlling the global nonlinear properties of polycrystalline ferroelectrics by engineering local properties.

6 June 2025 in Materials
Verified
Journal Article
Open access
PDF file
MBMustafa Cagri Bayir
Mustafa Cagri Bayir
EMEbru Menşur
Ebru Menşur
Electrocaloric materials, which exhibit adiabatic temperature change under an applied electric field, are promising for solid-state cooling technologies. In this study, the electrocaloric response of lead-free BaxCa1−xZryTi1−yO3 (BCZT) ceramics was modeled to investigate the effects of composition, processing, and measurement conditions on performance. A high-accuracy XGBoost regression model (R2 = 0.99, MAE = 0.02 °C) was developed using a dataset of 2188 literature-derived data points to predict and design the electrocaloric response of BCZT ceramics. The feature space incorporated compositional ratios, processing parameters, measurement settings, and atomic-level Magpie descriptors, along with Curie temperature to account for phase-transition behavior. Feature importance analysis revealed that electric field, measurement temperature, and proximity to the Curie point are the most critical factors influencing ΔTEC. Bayesian optimization was applied to navigate the design space and identify performance maxima under unconstrained and realistic constraints, offering valuable insights into the nonlinear interactions governing electrocaloric performance. Under room temperature and moderate-field conditions (24 °C, 40 kV/cm), the optimized ΔTEC achieved a value of 1.03 °C for Ba0.85Ca0.15Zr0.40Ti0.60, to be processed at 1090 °C for 3 h during calcination, 1300 °C for 2 h during sintering. By integrating experimental insight with machine learning and optimization, this study offers a refined, interpretable framework for accelerating the design of high-performance electrocaloric ceramics while reducing the experimental workload.

25 June 2025 in Journal of Materials Science: Materials in Electronics
Verified
Journal Article
Open access
PDF file
MBMustafa Cagri Bayir
Mustafa Cagri Bayir
EMEbru Mensur
Ebru Mensur
An eXtreme Gradient Boosting (XGBoost) machine learning model was developed to predict the electrocaloric temperature change (ΔT EC) of PMN-PT electroceramics based on processing parameters (PMN/PT ratio, sample type, calcination and sintering time/temperature) and measurement conditions (direct/indirect measurement, electric field, and measurement temperature). A dataset of 2863 data points was compiled from the experimental literature, and the model achieved a coefficient of determination (R 2) of 0.97 and a mean absolute error (MAE) of 0.04 °C on the test set, demonstrating strong predictive performance. Feature importance analysis revealed that electric field and T-TC are the primary drivers of electrocaloric response, while processing conditions also significantly influence ΔT EC. A Bayesian Optimization framework was employed to systematically identify the optimal processing parameters for maximizing ΔT EC. Under experimentally realistic conditions (24 °C measurement temperature, 40 kV/cm electric field), the optimal PMN/PT composition (81.06%/18.94%) and processing parameters (calcination at 810 °C for 3 h, sintering at 1280 °C for 7 h) were identified, yielding a predicted ΔT EC of 1.40 °C, which exceeds most experimentally reported values under similar conditions. Additionally, a virtual dataset of 100.000 synthetic data points was generated and analyzed to explore high-performance regions within the electrocaloric design space. The results highlight the potential of machine learning in materials science, offering a scalable and data-driven approach to accelerate the discovery and optimization of advanced electrocaloric materials.

1 July 2019
Verified
Conference Paper
Closed access
MBMustafa Cagri Bayir
Mustafa Cagri Bayir
EMEbru Mensur-Alkoy
Ebru Mensur-Alkoy
Lead lanthanum zirconate titanate (PLZT) (9/65/35) thin films were prepared on gallium-doped zinc oxide (GZO) coated glass substrates by sol-gel spin coating method for the first time in literature. Processing conditions such as pyrolysis and annealing temperature were selected as parameters to achieve high crystallinity and eliminate rosette phase. Optimum pyrolysis parameters were found as 200°C for 5 minutes and 430°C for 15 minutes to eliminate rosette phase and annealing temperature was selected as 725°C for 1 hour. These processing conditions resulted with 6.4 % -matrix phase while regular condition resulted with 19.8 % -matrix phase. Optical measurements were done in the range of 350–900 nm. Transmittance level of the films annealed at optimum condition were found as ~60% for 700nm wavelength and band gap levels were calculated as ~3.2 eV.