Lubricants that are based on renewable raw materials have drawn increased attention in various applications, especially those related to the food industry. Due to the high requirements of environmental protection, there is a need to develop biodegradable base oils that are environmentally friendly and do not contain harmful components. The objective of the research was to obtain a base oil with a certain viscosity and certain desired lubricating properties. Base oils were obtained from Crambe abyssinica oil by means of blending with synthetic oil and oxidation. The oxidation processes were carried out in the presence of N-hydroxyphthalimide with or without CO₂ as a solvent. As a final result of this study, oil bases meeting the viscosity requirements and showing suitable lubricating properties were obtained. The Raman spectra of the obtained oils were evaluated.

Petroleum, synthetic, and natural waxes have been used as hydrophobic bases for dispersions intended for use as barrier coatings for packaging paper. Oil-in-water dispersions with alkaline pH were prepared by a two-step homogenization procedure containing paraffin wax, with various characteristics, the Fischer–Tropsch synthesis product or beeswax. The size of the dispersed particles determined by dynamic light scattering depended on the type of hydrophobic base used and was in the range of 350–440 nm. The ability of dispersion particles in aggregation driven by electrostatic attraction, evaluated by Zeta potential analysis by electrophoretic light scattering, was from −26 to −50 mV. Static multiply light scattering was used for 30 days of stability assessment and helped to select the dispersion with a Sarawax SX70 wax base as the most stable. Dispersions were further used for coating the backing of kraft paper by the Meyer rod method. Coated paper with an applied coating of 6 g/m² had very good hydrophobic properties (Cobb60 < 4 g/m²), sufficient strength properties, and air permeation, which enabled its application as a packaging material. The dispersions based on Sarawax SX70 wax were evaluated as the best coating for Mondi ProVantage Kraftliner 125 g/m² backing paper. Good hydrophobic properties and strength properties indicate the possibility of using the SX70-based wax dispersion coating as a replacement for PFAS coatings in some applications.

Raw vegetable oil from Crambe abyssinica was subjected to oxidative treatment to enhance its viscosity. The oxidation processes were carried out in the presence of N-hydroxyphthalimide with or without supercritical CO₂ as a solvent. Four spectroscopic techniques (Raman, UV-VIS, FT-IR, NMR) were applied to assess the chemical changes taking place during the oxidation. Raman and NMR spectroscopy proved best in the assessment of the chemical transformations leading to increased viscosity of the modified vegetable oil.

Gemini surfactants 18–s–18(Et), comprised of two ethylammonium headgroups and two alkyl tails with m = 18 carbon atoms with spacers of s = 4, 6, 8 and 10 linking the headgroups (alkanediyl-α,ω-bis(diethyloctadecylammonium bromides)), were obtained. Their aqueous solution behaviour, including adsorption at the interface and aggregation in solution, was followed by tensiometric, conductometric and spectroscopic methods. The critical micelle concentration (CMC) of the surfactants decreased with increasing spacer length. The size of 18–s–18(Et) aggregates formed at concentrations of 10 and 40 CMC measured by DLS varied with the elongation of the spacer. Visualisation of aggregated surfactant structures at 40 CMC by cryo-TEM evidenced the formation of different morphologies depending on spacer length. Gemini with s = 4 formed elongated, cylindrical micelles, while geminis of s = 6, 8 and 10 self-assembled into vesicles. The ability of the studied geminis to solubilise hydrophobic dye Sudan I in water was determined as a function of surfactant concentration, demonstrating their high efficiency. Results for 18–s–18(Et) geminis were compared with those previously obtained for their analogues containing an amide group placed between headgroups and tails. The significant impact of amide groups on the surface activity and aggregation properties of gemini surfactants was evidenced and is related to hydrogen-bond formation by amide-containing compounds.

The lubricating properties of the lubricants were tested under boundary friction conditions; it was found that the surface-active additives had reduced the wear mark and thus the value of the Goz/40 parameter (limiting load of wear). The introduction of a surfactant containing amide compounds into the oils and greases was highly effective in slowing down the oxidation process. Lubricants containing mono–15 ([3-(N,N,N-dimethylbuthylamine)propyl]hexadecanamide chloride) and 15–4–15 (tetramethylene-bis [3-(N,N,N-dimethylamine)propyl]hexadecanamide) additives were characterised by higher oxidation stability compared to the unmodified lubricants. Both of the analysed substances showed bactericidal properties against Staphylococcus aureus and Salmonella enteritica. Tests of antibacterial activity in the lubricants with the addition of mono–15 and 15–4–15 confirmed that these lubricants can be considered bactericidal against Gram-positive and Gram-negative bacteria.