Martina Mudrá

Mrs. Martina Mudrá


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 September 2025 in Journal of Thermal Analysis and Calorimetry
Verified
Journal Article
Open access
PDF file
ZSZuzana Straková
Zuzana Straková
JMJúlia Marková
Júlia Marková
DKDaniel Kalús
Daniel Kalús
TSTomáš Strenk
Tomáš Strenk
KGKarolína Gábrišová
Karolína Gábrišová
MMMartina Mudrá
Martina Mudrá
In this thesis, we present alternative ventilation solutions with heat recovery to reduce energy consumption in apartment buildings: decentralised ventilation compared to local ventilation. The aim is to analyse, evaluate, and optimise the operation of mechanical ventilation. The parametric study of energy, economic, and environmental calculations focuses first on a single apartment and then on the entire apartment building. Local heat recovery units have been designed for the ventilation of the apartment building. The share of heat loss through ventilation is 45% of the total design heat output for heating the building. Considering the UN Sustainable Development Goals, particularly Goal 7 (affordable and clean energy), we evaluated an alternative using decentralised heat recovery units with enthalpy heat exchangers. This approach achieved significant thermal energy savings, covered heat losses due to ventilation, and provided improved air and environmental quality in the apartment building. In this case, the share of ventilation heat losses in the apartment building is only 13% of the total design heat output of the building. The total heat output of the heat source was reduced by almost 78.78 kW, and the energy savings of the decentralised units amounted to 151.30 MWh, a reduction of 44% compared to the local ventilation units. Although the initial investment cost is about 45% higher than for the local units, the return on investment is achieved within 6 years of operation. The proposed solution represents a 58% saving in primary energy for ventilation and an 81% reduction in CO 2 emissions.

25 June 2025 in Coatings
Verified
Journal Article
Open access
PDF file
VMVeronika Mučková
Veronika Mučková
DKDaniel Kalús
Daniel Kalús
SMSimon Muhič
Simon Muhič
ZSZuzana Straková
Zuzana Straková
MMMartina Mudrá
Martina Mudrá
MBMartin Bolček
Martin Bolček
Modular and prefabricated buildings are advantageous in terms of construction, transport, energy efficiency, fixed costs, and the use of environmentally friendly materials. Our research aims to analyze, evaluate, and optimize a lightweight perimeter structure with an integrated active thermal protection (ATP). We have developed a mathematical–physical model of a wall fragment, in which we have analyzed several variants through a parametric study. ATP in the energy function of a thermal barrier (TB) represents a high potential for energy savings. Cold tap water (an average temperature of +6 °C, thermal untreated) in the ATP layer of the investigated building structure increases its thermal resistance by up to 27.24%. The TB’s mean temperature can be thermally adjusted to a level comparable to the heated space (e.g., +20 °C). For the fragment under consideration, optimizing the axial distance between the pipes (in the ATP layer) and the insulation thickness (using computer simulation) reveals that a pipe distance of 150 mm and an insulation thickness of 100 mm are the most suitable. ATP has significant potential in the design of sustainable, resilient, and climate-adaptive buildings, thereby meeting the UN SDGs, in particular the Sustainable Development Goal 7 ‘Affordable and Clean Energy’ and the Goal 13 ‘Climate Action’.