Biochar is considered as a potential substitute for soil organic matter (SOM). Considering the importance of biochar, the present review is based on the different benefits and potential risks of the application of biochar to the soil. Biochar addition to low organic carbon soils can act as a feasible solution to keep soil biologically active for the cycling of different nutrients. The application of biochar could improve soil fertility, increase crop yield, enhance plant growth and microbial abundance, and immobilize different contaminants in the soil. It could also be helpful in carbon sequestration and the return of carbon stock back to the soil in partially combusted form. Due to the large surface area of biochar, which generally depends upon the types of feedstock and pyrolysis conditions, it helps to reduce the leaching of fertilizers from the soil and supplies additional nutrients to growing crops. However, biochar may have some adverse effects due to emissions during the pyrolysis process, but it exerts a positive priming effect (a phenomenon in which subjection to one stimulus positively influences subsequent stimulus) on SOM decomposition, depletion of nutrients (macro- and micro-) via strong adsorption, and impact on soil physicochemical properties. In view of the above importance and limitations, all possible issues related to biochar application should be considered. The review presents extensive detailed information on the sustainable approach for the environmental use of biochar and its limitations.
An important goal in environmental research for industrial activity and sites is the investigation and development of effective adsorbents for chemical pollutants that are widespread, inexpensive, unharmful to the environment, and have the required adsorption selectivity. Organoclays are adsorption materials that can be obtained by modifying clays and clay minerals with various organic compounds through intercalation and surface grafting. Organoclays have important practical applications as adsorbents of a wide range of organic pollutants and some inorganic contaminants. The traditional raw materials for the synthesis of organoclays are phyllosilicates with the expanding structural cell of the smectite group, such as montmorillonite. Moreover, other phyllosilicates and inosilicates are used to synthesize organoclay to a limited extent. The purpose of this review was to analyze the possibility of using minerals of other groups with different abilities to expand the structure and structural charge for the adsorption of chemical environmental pollutants. The structural characteristics of various groups of phyllosilicates and chain minerals that affect their ability to modify organic surfactants and the adsorption properties of prepared organoclays were reviewed.
Due to anthropogenic activities, potentially toxic elements cause severe soil pollution worldwide. Therefore, remediation of contaminated soils is exigent and imperative. One cost-effective and environmentally friendly remediation approach is the application of biochar, which is a solid carbonaceous material. Biochar degrades slowly in soil and can persist there for thousands of years, according to various estimations. In addition, coal obtained from crop wastes has a developed porous structure, a high specific surface area, and does not contain toxic compounds such as heavy metals and polycyclic aromatic hydrocarbons. Biochar with optimal values for specific surface area and porosity was obtained from rice husk by stepwise pyrolysis. The pyrolysis parameters such as the heating rate (11 °C∙min−1), temperature (700 °C), and holding time (45 min) were established. At the same time, the surface area of the biochar increased by almost three times with a change in the pyrolysis conditions. As a part of this research, the efficacy of adsorption of Cu(II) from Haplic Chernozem using biochar made from rice husk was examined. The Langmuir and Freundlich models were employed to describe the adsorption data. The isotherm data of heavy metals was better fitted to the Langmuir adsorption model. The addition of rice husk biochar to the soil presented greater removal efficiencies of Cu(II) than soil in pure form. The analysis of the structural characteristics of the sorbent suggest that this material may work efficiently for the restoration of contaminated soil.
The research of the fundamentals of the behavior of behavior in the soil–plant system during their co-contamination is of high interest because of the absence of technologies for the creation of effective, environmentally friendly and cost-effective remediation methods, as well as integrated systems for predicting the quality of soils co-contaminated with HMs and PAHs. The unique model vegetation experiment was studied with Haplic Chernozem contaminated by one of the priority organic toxicants, benzo[a]pyrene (BaP), applied alone and co-contaminated with Cu with the subsequent vegetation of tomato (Solanum lycopersicum) and spring barley plants (Hordeum sativum Distichum). Biochar obtained from sunflower husks was used as a sorbent for the remediation of the contaminated soil. It was established that by increasing the BaP amount applied to the soil, the rate of BaP degradation improved. The effect was enhanced in the presence of biochar and decreased in the case of joint co-contamination with Cu, which is especially expressed for the soil of tomato plants. The half-degradation time of the BaP molecule varied from 8 up to 0.2 years for tomatoes and barley.
Based on 10 years of environmental monitoring located around the emission zone of an electricity supplier, the main regularities have been studied for the content of heavy metals (HMs), such as Pb, Cd, Zn, Cu, Ni, Mn, and Cr, and 16 priority polycyclic aromatic hydrocarbons (PAHs) in the soils of agricultural landscapes and their accumulation in Triticum aestivum. It has been shown that one of the most significant factors for the pollutants accumulation in soils and plants was the prevailing wind direction on the territory and atmospheric transfer of the dust particles of the enterprise with adsorbed pollutants. As the content of pollutants in the soil increased, their accumulation in Triticum aestivum increased with each season to a level exceeding maximum permissible concentrations (MPC), especially for Pb, Cd, and benzo[a]pyrene (BaP). The unambiguous influx of pollutants from the soil into the roots and further into the aboveground organs of the plant was typical only for Mn, Cr, and BaP, and the accumulation of other studied pollutants can be explained by their foliar influx. It has been established that Triticum aestivum was a more tolerant plant with respect to heavy metals pollution than PAHs.
Forest ecosystems perform important forestry and ecological functions. However, mining and processing companies cause significant soil contamination by heavy metals, in particular, copper (Cu). The resistance of nine types and subtypes of forest soils of the dry and humid subtropics in the Greater Caucasus region to Cu contamination at concentrations of 100, 1000, and 10,000 mg/kg was evaluated for the first time following the most sensitive and informative biological (microbiological, biochemical, and phytotoxic) indicators via a laboratory simulation study. Contamination was simulated under laboratory conditions. The series of forest soils was established following their resistance to Cu pollution: brown leached soils (Haplic Cambisols Eutric) = brown typical soils (Haplic Cambisols Eutric) > brown carbonate soils (Haplic Cambisols Eutric) = sod-carbonate typical soils (Rendzic Leptosols Eutric) ≥ yellow soils (Albic Luvisols Abruptic) ≥ leached sod-carbonate soils (Rendzic Leptosols Eutric) > brown forest slightly unsaturated soils (Haplic Cambisols Eutric) > acid brown forest soils (Haplic Cambisols Eutric) > acid brown forest podzolized soils (Haplic Cambisols Eutric). Regional environmentally safe standards for the Cu content in forest soils of the dry and humid subtropics of the Greater Caucasus were proposed: for brown typical soils, brown leached soils, brown carbonate soils, brown forest slightly unsaturated soils, sod-carbonate typical soils, leached sod-carbonate soils, and yellow soils, the rMPC was 100 mg/kg; for acid brown forest soils and acid brown forest podzolized soils, the rMPC was 70 mg/kg.