This review aims to streamline the approach to assessing the most used valorization methods for fruit and vegetable waste (FVW) that are eco-friendly, cost-effective, and sustainable within a circular economy framework. Green processing technologies for the extraction of bioactive compounds from FVW, their applications, and the technico-economical assessment of FVW’ biorefinery to support circular economy are highlighted. Important value-added products generated by FVW include bioactive compounds, pectin, protein isolates, such as soy, natural pigments such as anthocyanins, quinones, carotenoids, betalains, and chlorophyll. At this time, the prospects of using FVW have increased in the food supplements, bioactive and edible food packaging, agriculture, energy, and water purification fields. The findings report that proper management of FVW not only minimizes their addition to landfills in the absence of composting, but also promotes the efficient utilization of resources for the development of innovative materials with a wide range of beneficial applications. Implementing the possible solutions described in this paper would not only reduce environmental impact, but also open up new economic opportunities through the valorization of FVW.

Due to its valuable compounds, food waste has been gaining attention in different applications, such as life quality and environment. Combined with circular economy requirements, a valorization method for waste, especially banana waste, was to convert them into adsorbents with advanced properties. The banana waste, after thermal treatment, was used with high removal performances (100%) for the removal of heavy metals, such as Cr, Cu, Pb, and Zn, but their small particle size makes them very hard to recover and reuse. For this reason, a biopolymeric matrix was used to incorporate the banana waste. The matrix was chosen for its remarkable properties, such as low cost, biodegradability, low carbon footprint, and reduced environmental impact. In this research, different types of materials (simple banana peel ash BPA and combined with biopolymeric matrix, ALG–BPA, CS–BPA) were prepared, characterized, and tested. The materials were characterized by means of attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), optical microscopy (OM), scanning electron microscopy (SEM), and tested for the removal of metal ions from synthetic solutions using atomic absorption spectroscopy (AAS). The ALG–BPA material proved to be the most efficient in the removal of heavy metal ions from synthetic solution, reaching even 100% metal removal for Cr, Fe, Pb, and Zn, while the CS-based materials were the least efficient, presenting the best values for Cr and Fe ions with a removal efficiency of 34.14% and 28.38%, respectively. By adding BPA to CS, the adsorption properties of the material were slightly improved, but also only for Cr and Fe ions, to 37.09% and 57.78%.

Massive amounts of industrial and agricultural water around the world are polluted by various types of contaminants that harm the environment and affect human health. Alginic acid is a very versatile green polymer used for heavy metal adsorption due to its availability, biocompatibility, low cost, and non-toxic characteristics. The aim of this paper was to prepare new low-cost hybrid composite beads using sodium alginate with treated montmorillonite and kaolin for the adsorption of copper (Cu) cations. Modified and unmodified clays were investigated by studying their morphology and elemental composition, functional groups, and mean particle size and particle size distribution. The characterization of alginate/clay hybrid composite beads was carried out by evaluating surface morphology (by scanning electron microscopy, SEM), crystallinity (by X-ray diffraction, XRD), and point of zero charge (pH_pzc)(Zeta Potential Analyzer). Batch adsorption experiments of alginate/clay hybrid composite beads investigated the effect of metal concentration in the range of 1–4 mg L⁻¹ on Cu(II) removal, adsorption kinetic for maximum 240 min, and Langmuir and Freundlich adsorption isotherms by using atomic absorption spectrometry. The pseudo-second-order kinetic model best fitted the adsorption for alginate/montmorillonite beads (R² = 0.994), while the diffusion process was predominant for montmorillonite/kaolin beads (R² = 0.985). The alginate/clay hybrid materials best fitted the Langmuir isotherm model.

Ferrous waste by-products from the metallurgical industry have a high potential for valorization in the context of the circular economy, and can be converted to value-added products used in environmental remediation. This research reviews the latest data available in the literature with a focus on: (i) sources from which these types of iron-based wastes originate; (ii) the types of ferrous compounds that result from different industries; (iii) the different methods (with respect to the circular economy) used to convert them into products applied in water and wastewater decontamination; (iv) the harmful effects ferrous wastes can have on the environment and human health; and (v) the future perspectives for these types of waste.

In today’s world, due to population increase, there are many alarming and potential catastrophic problems like climate change, environmental pollution and an enormous mass of wastes constantly produced by humankind to find innovative solutions for the management, recycling, and valorization of biowaste from agricultural production, food processing, and organic household residues. The search for sustainable and efficient wastewater treatment technologies has gained scientific interest recently; particular focus is on using biowaste to produce hydrochars (HCs) via the hydrothermal carbonization (HTC) process used as adsorbent materials for dye, heavy metal, and emerging pollutant removal. HTC materials derived from renewable resources are an environmentally friendly and adequate way to adsorb pollutants such as organic and inorganic molecules from wastewaters. This review focuses on the advantages of the HTC process which lead to improved properties of the materials obtained, making them highly efficient in wastewater treatment. The information presented in this paper was derived from the most recent publications in the field. Future perspectives of HC materials should consider the possibilities of scale-up, pretreatment of biowastes, and the optimal parameters of the HTC process to produce HCs applied for pollutant removal from wastewaters.

The present study investigates the influence of hot-deformation, above β-transus and different thermal treatments on the microstructural and mechanical behaviour of a commercially available Ti-6246 titanium-based alloy, by SEM (scanning electron microscopy), tensile and microhardness testing techniques. The as-received Ti-6246 alloy was hot-deformed—HR by rolling, at 1000 °C, with a total thickness reduction (total deformation degree) of 65%, in 4 rolling passes. After HR, different thermal (solution—ST and ageing—A) treatments were applied in order to induce changes in the alloy’s microstructure and mechanical behaviour. The applied solution treatments (ST) were performed at temperatures below and above β-transus (α → β transition temperature; approx. 935 °C), to 800 °C, 900 °C and 1000 °C respectively, while ageing treatment at a fixed temperature of 600 °C. The STs duration was fixed at 27 min while A duration at 6 h. Microstructural characteristics of all thermomechanical (TM) processed samples and obtained mechanical properties were analysed and correlated with the TM processing conditions. The microstructure analysis shows that the applied TM processing route influences the morphology of the alloy’s constituent phases. The initial AR microstructure shows typical Widmanstätten/basket-weave-type grains which, after HR, are heavily deformed along the rolling direction. The STs induced the regeneration of α-Ti and β-Ti phases, as thin alternate lamellae/plate-like structures, showing preferred spatial orientation. Also, the STs induced the formation of α′-Ti/α″-Ti martensite phases within parent α-Ti/β-Ti phases. The ageing treatment (A) induces reversion of α′-Ti/α″-Ti martensite phases in parent α-Ti/β-Ti phases. Mechanical behaviour showed that both strength and ductility properties are influenced, also, by applied TM processing route, optimum properties being obtained for a ST temperature of 900 °C followed by ageing (ST2 + A state), when both strength and ductility properties are at their maximum (σ_UTS = 1279 ± 15 MPa, σ_0.2 = 1161 ± 14 MPa, ε_f = 10.1 ± 1.3%).