Three-dimensional (3D)-bioprinting enables scientists to mimic in vivo micro-environments and to perform in vitro cell experiments under more physiological conditions than is possible with conventional two-dimensional (2D) cell culture. Cell-laden biomaterials (bioinks) are precisely processed to bioengineer tissue three-dimensionally. One primarily used matrix material is sodium alginate. This natural biopolymer provides both fine mechanical properties when gelated and high biocompatibility. Commonly, alginate is 3D bioprinted using extrusion based devices. The gelation reaction is hereby induced by a CaCl2 solution in the building chamber after material extrusion. This established technique has two main disadvantages: (1) CaCl2 can have toxic effects on the cell-laden hydrogels by oxygen diffusion limitation and (2) good printing resolution in the CaCl2 solution is hard to achieve, since the solution needs to be removed afterwards and substituted by cell culture media. Here, we show an innovative approach of alginate bioprinting based on a CaCl2 nebulizer. The device provides CaCl2 mist to the building platform inducing the gelation. The necessary amount of CaCl2 could be decreased as compared to previous gelation strategies and limitation of oxygen transfer during bioprinting can be reduced. The device was manufactured using the MJP-3D printing technique. Subsequently, its digital blueprint (CAD file) can be modified and additive manufactured easily and mounted in various extrusion bioprinters. With our approach, a concept for a more gentle 3D Bioprinting method could be shown. We demonstrated that the concept of an ultrasound-based nebulizer for CaCl2 mist generation can be used for 3D bioprinting and that the mist-induced polymerization of alginate hydrogels of different concentrations is feasible. Furthermore, different cell-laden alginate concentrations could be used: Cell spheroids (mesenchymal stem cells) and single cells (mouse fibroblasts) were successfully 3D printed yielding viable cells and stable hydrogels after 24 h cultivation. We suggest our work to show a different and novel approach on alginate bioprinting, which could be useful in generating cell-laden hydrogel constructs for e.g., drug screening or (soft) tissue engineering applications.
To form modern materials with biomimic surfaces, the novel pathway for surface functionalization with specific ligands of well-known and widely used polyester-based rigid media was developed and optimized. Two types of material bases, namely, poly(lactic acid) and poly(ε-caprolactone), as well as two types of material design, e.g., supermacroporous matrices and nanoparticles (NPs), were modified via covalent attachment of preliminary oxidized polyvinylsaccharide poly(2-deoxy-N-methacryloylamido-d-glucose) (PMAG). This polymer, being highly biocompatible and bioinspired, was used to enhance hydrophilicity of the polymer surface and to provide the elevated concentration of reactive groups required for covalent binding of bioligands of choice. The specialties of the interaction of PMAG and its preliminary formed bioconjugates with a chemically activated polyester surface were studied and thoroughly discussed. The supermacroporous materials modified with cell adhesion motifs and Arg-Gly-Asp-containing peptide (RGD-peptide) were tested in the experiments on bone tissue engineering. In turn, the NPs were modified with bioligands (“self-peptide” or camel antibodies) to control their phagocytosis that can be important, for example, for the preparation of drug delivery systems.
Buried explosive material, e.g., landmines, represent a severe issue for human safety all over the world. Most explosives consist of environmentally hazardous chemicals like 2,4,6-trinitrotoluene (TNT), carcinogenic 2,4-dinitrotoluene (2,4-DNT) and related compounds. Vapors leaking from buried landmines offer a detection marker for landmines, presenting an option to detect landmines without relying on metal detection. 2,4-Dinitrotoluene (DNT), an impurity and byproduct of common TNT synthesis, is a feasible detection marker since it is extremely volatile. We report on the construction of a wireless, handy and cost effective 2,4-dinitrotoluene biosensor combining recombinant bioluminescent bacterial cells and a compact, portable optical detection device. This biosensor could serve as a potential alternative to the current detection technique. The influence of temperature, oxygen and different immobilization procedures on bioluminescence were tested. Oxygen penetration depth in agarose gels was investigated, and showed that aeration with molecular oxygen is necessary to maintain bioluminescence activity at higher cell densities. Bioluminescence was low even at high cell densities and 2,4-DNT concentrations, hence optimization of different prototypes was carried out regarding radiation surface of the gels used for immobilization. These findings were applied to sensor construction, and 50 ppb gaseous 2,4-DNT was successfully detected.
13 July 2018 in Journal of Biomaterials Applications
Biodegradable materials play a crucial role in both material and medical sciences and are frequently used as a primary commodity for implants generation. Due to their material inherent properties, they are supposed to be entirely resorbed by the patients' body after fulfilling their task as a scaffold. This makes a second intervention (e.g. for implant removal) redundant and significantly enhances a patient’s post-operative life quality. At the moment, materials for resorbable and biodegradable implants (e.g. polylactic acid or poly-caprolactone polymers) are still intensively studied. They are able to provide mandatory demands such as mechanical strength and attributes needed for high-quality implants. Implants, however, not only need to be made of adequate material, but must also to be personalized in order to meet the customers’ needs. Combining three dimensional-printing and high-resolution imaging technologies a new age of implant production comes into sight. Three dimensional images (e.g. magnetic resonance imaging or computed tomography) of tissue defects can be utilized as digital blueprints for personalized implants. Modern additive manufacturing devices are able to use a variety of materials to fabricate custom parts within short periods of time. The combination of high-quality resorbable materials and personalized three dimensional-printing for the custom application will provide the patients with the best suitable and sustainable implants. In this study, we evaluated and compared four resorbable and three dimensional printable materials for their in vitro biocompatibility, in vitro rate of degradation, cell adherence and behavior on these materials as well as support of osteogenic differentiation of human adipose tissue-derived mesenchymal stem cells. The tests were conducted with model constructs of 1 cm2 surface area fabricated with fused deposition modeling three dimensional-printing technology.