The goal of this study was to evaluate the hazardous chemical exposure control system in a semiconductor manufacturing company and recommend an appropriate exposure surveillance system for hazardous agents. We reviewed compliance-based chemical exposure data compiled between 2012 and 2014 by the study company. The chemical management system, characteristics of chemical use and hazardous gas monitoring system were also investigated. We evaluated the airborne isopropyl alcohol (IPA) and acetone generally used as cleaning solvents, volatile organic compounds and metals levels using internationally recommended sampling and analytical methods. Based on the results of past working environment measurement data and of our investigation, the overall current exposure to chemicals by semiconductor workers during routine production work appears to be controlled below occupational exposure limits. About 40% of chemical products used were found to contain at least one unidentifiable trade-secret substance. There are several situations and maintenance tasks that need special attention to reduce exposure to carcinogens as much as possible. In addition, a job-exposure matrix as a tool of surveillance system that can examine the exposure and health status of semiconductor workers according to type of operation and type of job or task is recommended.

According to recent research, indium nanoparticles (NPs) are more toxic than micro-sized particles. While cases of indium lung disease have been reported worldwide, very little research has been conducted on the occupational exposure to indium NPs. Recently, an indium-related lung disease was reported in Korea, a global powerhouse for display manufacturing. In this study, we conducted an assessment ofoccupational exposure at an indium tin oxide (ITO) powder manufacturing plant, where the first case of indium lung disease in Korea occurred. Airborne dustwas obtained from a worker’s breathing zone, and area sampling in the workplace environment was conducted using real-time monitoring devices. Personal samples were analyzed for the indium concentrations in total dust, respirable dust fraction, and NPs using personal NPs respiratory deposition samplers. The total indium concentration of the personal samples was lower than the threshold limit value recommended by the American Conference of Governmental Industrial Hygienists (ACGIH TLV), which was set as occupational exposure limit (OEL). However, the respirable indium concentration exceeded the recently set ACGIH TLV for the respirable fraction of indium dust. The concentration of indium NPs ranged between 0.003 and 0.010 × 10⁻² mg/m³, accounting for only 0.4% of the total and 2.7% of the respirable indium particles. This was attributed to the aggregating of NPs at the µm sub-level. Given the extremely low fraction of indium NPs in the total and respirable dust, the current OEL values, set as the total and respirable indium concentrations, do not holistically represent the occupational exposure to indium NPs or prevent health hazards. Therefore, it is necessary to set separate OEL values for indium NPs. This study covers only the process of handling ITO powder. Therefore, follow-up studies need to be conducted on other ITO sputtering target polishing and milling processes, which typically generate more airborne NPs, to further investigate the effects of indium on workers and facilitate the necessary implementation of indium-reducing technologies.

The level of benzene exposure in the petrochemical industry during regular operation has been well established, but not in turnaround (TA), where high exposure may occur. In this study, the characteristics of occupational exposure to benzene during TA in the petrochemical companies were investigated in order to determine the best management strategies and improve the working environment. This was accomplished by evaluating the exposure level for the workers working in environments where benzene was being produced or used as an ingredient during the unit process. From 2003 to 2008, a total of 705 workers in three petrochemical companies in Korea were studied. Long- and short-term (< 1 hr) samples were taken during TAs. TA was classified into three stages: shut-down, maintenance and start-up. All works were classified into 12 occupation categories. The long-term geometric mean (GM) benzene exposure level was 0.025 (5.82) ppm (0.005-42.120 ppm) and the short-term exposure concentration during TA was 0.020 (17.42) ppm (0.005-61.855 ppm). The proportions of TA samples exceeding the time-weighted average, occupational exposure level (TWA-OEL in Korea, 1 ppm) and the short-term exposure limit (STEL-OEL, 5 ppm) were 4.1% (20 samples of 488) and 6.0% (13 samples of 217), respectively. The results for the benzene exposure levels and the rates of exceeding the OEL were both statistically significant (p < 0.05). Among the 12 job categories of petrochemical workers, mechanical engineers, plumbers, welders, fieldman and scaffolding workers exhibited long-term samples that exceeded the OEL of benzene, and the rate of exceeding the OEL was statistically significant for the first two occupations (p < 0.05). These findings suggest that the periodic work environment must be assessed during non-routine works such as TA.

The aim of this study was to provide baseline data for the assessment of exposure to indium and to prevent adverse health effects among workers engaged in the electronics and related industries in Republic of Korea. Total (n = 369) and respirable (n = 384) indium concentrations were monitored using personal air sampling in workers at the following 19 workplaces: six sputtering target manufacturing companies, four manufacturing companies of panel displays, two companies engaged in cleaning of sputtering components, two companies dedicated to the cleaning of sputtering target, and five indium recycling companies. The level of exposure to total indium ranged from 0.9 to 609.3 μg/m3 for the sputtering target companies; from 0.2 to 2,782.0 μg/m3 for the panel display companies and from 0.5 to 2,089.9 μg/m3 for the indium recycling companies. The level of exposure to respirable indium was in the range of 0.02 to 448.6 μg/m3 for the sputtering target companies; 0.01 to 419.5 μg/m3 for the panel display companies; and 0.5 to 436.3 μg/m3 for the indium recycling companies. The indium recycling companies had the most samples exceeding the exposure standard for indium, followed by sputtering target companies and panel display companies. The main finding from this exposure assessment is that many workers who handle indium compounds in the electronics industry are exposed to indium levels that exceed the exposure standards for indium. Hence, it is necessary to continuously monitor the indium exposure of this workforce and take measures to reduce its exposure levels.

Background: Workers performing signal work for a heavy-duty shipyard transporter are exposed to diesel engine exhaust (DEE), which is classified as a Group 1 carcinogen by the International Agency for Research on Cancer. Here, we evaluate DEE exposure levels for workers engaged in shipyard transporter signal work through measurement of respirable elemental carbon (EC), organic carbon (OC), and total carbon (TC), and identify the factors affecting exposure. Methods: Sixty signal workers were selected, and measured samples were analyzed by thermo-optical transmittance. Results: The mean EC exposure level of a transporter signal worker was 4.16 µg/m³, with a range of 0.69 to 47.81 µg/m³. EC, OC, and TC exposure levels did not show statistically significant differences for individual variables except the measurement date. This was influenced by meteorological factors such as wind speed, and it was confirmed that the work position, number carried, and load capacity in the multiple regression analysis after minimizing the meteorological effects were factors influencing the EC exposure level of the signalman. Conclusions: Meteorological conditions influenced DEE exposure of transporter signal workers who work outdoors. The mean EC exposure level was not high, but exposures to high concentrations of EC were recorded by meteorological factors.

Research on worker exposure to volatile organic compounds (VOCs) during asphalt paving operations remains significantly limited, and regulatory frameworks governing such exposures are also insufficient. Previous studies have primarily focused on a limited number of major VOCs. However, this study employs high-resolution, high-performance Proton Transfer Reaction Time-of-Flight Mass Spectrometry (PTR-ToF-MS) to comprehensively evaluate exposure levels to 25 different VOCs. Additionally, Monte Carlo simulations were utilized to assess both non-carcinogenic and carcinogenic risks, thereby providing foundational data for future risk mitigation strategies. During asphalt paving operations, the concentrations of most VOCs increased by a factor of 2 to 10 compared to background levels. Nevertheless, none of these compounds exceeded the Occupational Exposure Limits. However, the concentration of acrolein exceeded the Ceiling Threshold Limit Value established by the American Conference of Governmental Industrial Hygienists by approximately tenfold, highlighting the critical need for peak exposure management. The non-carcinogenic risk assessment revealed that the maximum Hazard Quotient (HQ) values for acetaldehyde, 1,3-butadiene, and acrolein exceeded 1, indicating potential adverse health effects. Furthermore, the Lifetime Cancer Risk (LCR) values for benzene and 1,3-butadiene surpassed established safety thresholds, confirming a significant increase in carcinogenic risk. Furthermore, this study proposes measures to reduce exposure to hazardous substances.