Universal joints are fundamental components in mechanical engineering and robotics, as they connect different parts of the system and transmit motion in multiple directions. Traditionally, universal joints have been passive, but in recent years, interest has grown in making them active to achieve greater control over movement. This research proposes and analyzes a new alternative for an active universal joint, involving a cable and a motor for each axis of the joint in a similar geometric arrangement for each joint variable, which allows its scalability without compromising its internal functionality. Mathematical analyses of the cable behavior and the direct kinematics of the proposed system are carried out. Finally, the practical functionality is evidenced through a prototype, demonstrating its usefulness in a two axis tracking application for photovoltaic generation systems. The results and conclusions describe its advantages and limitations, which can be explored in future studies.
Their large positioning workspace characterizes the cable-driven parallel robots (CDPR). However, the orientation that the end effector can develop presents limitations that depend on the configuration of the cables in its fixed structure, such as in its mobile structure. These limitations may be geometric, related to the limit prior to cable entanglement, or physical limitations related to the forces the cables exert to reach the required orientation. As the orientation develops, the cables must change the magnitude of the action, and in some instances, some of them must stop acting or failing that, they must begin to act if they did not do so before; in this way, the joint action of all will allow rotating the end effector (EE) of the robot towards a proposed value. In this work, a strategy is proposed to geometrically identify the effective action (corresponding to the sign of the control signal for each cable) that each robot cable must execute while the rotation of the EE is developing. The simulations are carried out in MATLAB, with Simulink and Simscape, the results of which have allowed us to verify the effectiveness of the proposal, making the rotation of the end effector more flexible with a notably better performance compared to a traditional rigid proposal that does not consider an instantaneous analysis of the condition of rotation of the EE.
For the study and experimentation of physical systems, it is essential to measure the physical variables, which implies choosing the most convenient method that does not affect the natural behavior of the system. This work presents the modeling and sensing of the spherical pendulum, integrating a novel non-invasive measurement scheme based on infrared sensors arranged in a quadrature configuration. The proposed method enables the estimation of angles around two axes, leveraging light reflection on a perpendicular plane aligned with the pendulum bar. A mathematical model was developed to create simulations, and a prototype was constructed to perform experiments and validate the detection method. The values recorded by the sensors enable the reproduction of the pendulum’s trajectory, allowing for the correlation of real results with those of the simulations. The similarity of behavior between the simulations and the experimentation facilitates the validation of the proposal.