A high-power, narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870 W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3 dB spectral linewidth of 0.43 nm with beam quality being M2 < 1.33 and polarization extinction ratio (PER) being 16.3 dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6 kW-level operation.
A high power narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of Stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3dB spectral linewidth of 0.43nm with beam quality be M² < 1.3 and polarization extinction ratio (PER) being 16.3dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6kW-level operation.
The spectral characteristics of pump laser diodes (LDs) introduce significant ambiguity into the performance evaluation of high-power ytterbium-doped fiber lasers (YDFLs), obscuring their intrinsic efficiency and hindering reliable system design. Here, we introduce a rigorous quantitative framework that decouples these pump-induced effects by referencing laser performance to the absorbed, rather than the launched, pump power. Our analysis demonstrates that the widely reported discrepancies in conventional optical-to-optical (OO) and slope efficiencies are governed almost entirely by variations in pump absorption, while the influence of the quantum defect is negligible. This approach provides a robust metric for intrinsic laser performance that is independent of the LD’s spectral properties, proving particularly valuable for systems pumped by non-wavelength-stabilized LDs (nWS-LDs). We uncover a non-monotonic evolution of the unabsorbed residual pump power, revealing that the peak thermal load on system components occurs at an intermediate operational state, not at maximum pump power. This finding challenges conventional thermal management strategies and is critical for ensuring the long-term operational reliability of high-power YDFLs.