Fengyun Li

Dr. Fengyun Li

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 May 2025 in Photonics Research
Verified
Journal Article
Closed access
YWYu Wen
Yu Wen
CZChun Zhang
Chun Zhang
YZYuan Zhu
Yuan Zhu
ZGZixiang Gao
Zixiang Gao
XJXingchen Jiang
Xingchen Jiang
JWJianjun Wang
Jianjun Wang
Stimulated Brillouin scattering (SBS)-induced mode distortion (MD) in high power narrow linewidth fiber amplifiers has been implemented, and the origin has been investigated from the aspect of the evolution of the optical spectrum, spatial beam profiles, and temporal-frequency domain characteristics. It is shown that, following the onset of the backward giant pulses generated by SBS, forward giant pulses were generated, which reached multi-kilowatt level peak power and triggered the onset of stimulated Raman scattering (SRS). After the onset of SRS, the beam quality starts to degrade, and the beam profiles deteriorate obviously. It reveals that the SBS-induced MD is a two-stage physical process: SBS-induced forward giant pulses trigger the SRS effect, and then the SRS effect causes the beam deterioration of the signal laser, which means that SRS is the origin of the MD observed after the onset of SBS. To the best of our knowledge, this is the first revelation of SBS-induced mode distortion in high power narrow linewidth fiber amplifiers, which can facilitate the in-depth understanding and effective suppression of the complicated mode evolution phenomena.

11 July 2025 in Photonics
Verified
Journal Article
Open access
PDF file
ZGZixiang Gao
Zixiang Gao
QSQiang Shu
Qiang Shu
FLFang Li
Fang Li
CZChun Zhang
Chun Zhang
Fengyun LiFengyun Li
Fengyun Li
JWJianjun Wang
Jianjun Wang
A high-power, narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870 W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3 dB spectral linewidth of 0.43 nm with beam quality being M2 < 1.33 and polarization extinction ratio (PER) being 16.3 dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6 kW-level operation.

18 December 2025 in Journal of Physics: Photonics
Verified
Journal Article
Open access
rumao taorumao tao
rumao tao
CZChun Zhang
Chun Zhang
Fengyun LiFengyun Li
Fengyun Li
LXLianghua Xie
Lianghua Xie
LHLong Huang
Long Huang
QCQiuhui Chu
Qiuhui Chu
Mode instability behaviour in high-power fibre amplifiers with various coiled packages has been investigated numerically by a modified theoretical model, considering the stimulated thermal Rayleigh scattering reseeded by spontaneous thermal Rayleigh noise. The modified model can avoid the physical fake case where the high order mode is reduced to below the spontaneous thermal Rayleigh noise level, which can cause as large as 30% overestimate of the mode instability threshold. The modified model improves the accuracy of the mode instability threshold simulations by >30%, and the discrepancy between experimental results and previous theoretical predictions is explained and eliminated by the modified theoretical model. Mode instability threshold as well as the high order mode evolution in various coiled high power fibre amplifiers is revisited based on this model, which reveals that, from the perspective of mitigating mode instability, fibre amplifiers with the gain fibre coiled in a cylindrical shape are superior to those in a spiral shape, and the mode instability threshold can be increased by nearly two times. It also shows that the current gain fibres do not reach the upper mode instability limits, and have the potential of delivering mode-instability-free 10kW fibre lasers. This work provides further insight on the physical mechanism of the mode instability, and can guide the design of the high-power fibre lasers to achieve near-diffraction-limited beam quality.

10 March 2026 in Optics Letters
Verified
Journal Article
Closed access
XJXingchen Jiang
Xingchen Jiang
CZChun Zhang
Chun Zhang
QSQiang Shu
Qiang Shu
FLFang Li
Fang Li
SZShifang Zhai
Shifang Zhai
rumao taorumao tao
rumao tao
In this Letter, Yb-doped Al 2 O 3 –P 2 O 5 –B 2 O 3 –SiO 2 fibers are first studied with different B 2 O 3 doping levels to suppress stimulated Brillouin scattering (SBS). It is revealed that by heavy B 2 O 3 doping, the Brillouin gain spectrum broadens, and the gain coefficient decreases substantially, which leads to a significant SBS suppression effect. For Yb-doped fibers (YDFs) of 6.43 mole% B 2 O 3 , the Brillouin gain coefficient suppression ratio improves by more than 5.0 dB, and the SBS threshold of single-frequency (SF) laser emission enhances by 4.87 times, compared to YDF of weak B 2 O 3 doping. Based on the optimal B 2 O 3 -doped YDF with a step-index 20-μm-diameter core, high-beam-quality single-frequency laser emission has been achieved with 311.7 W output power. The laser linewidth is measured to be 2.9 kHz. The beam quality M 2 factor is 1.20, and the fundamental mode ratio is calculated to be above 97% in the output beam at the maximum output. This work provides an effective material-based strategy for power scaling of single-frequency fiber lasers with strong potential for practical applications.

29 February 2024 in Optical Fiber Technology
Verified
Journal Article
Closed access
NLNian Liu
Nian Liu
Fengyun LiFengyun Li
Fengyun Li
CZChun Zhang
Chun Zhang
YCYi Chen
Yi Chen
CGCong Gao
Cong Gao
JDJiangyun Dai
Jiangyun Dai

18 June 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
ZGZixiang Gao
Zixiang Gao
QSQiang Shu
Qiang Shu
FLFang Li
Fang Li
CZChun Zhang
Chun Zhang
Fengyun LiFengyun Li
Fengyun Li
JWJianjun Wang
Jianjun Wang
A high power narrow-linewidth, all-fiber polarization-maintaining (PM) amplifier has been demonstrated. A lasing power of 5870W has been delivered in master oscillator power amplifier architecture with cascaded white noise source (WNS) phase modulation and bidirectional pumping schemes. The maximal power was limited by the onset of Stimulated Brillouin scattering. At the maximum power operation, the amplifier exhibited a 3dB spectral linewidth of 0.43nm with beam quality be M² < 1.3 and polarization extinction ratio (PER) being 16.3dB. To the best of our knowledge, this represents the highest spectral brightness and PER achieved by PM fiber laser systems around 6kW-level operation.