Songxin Zhao

Dr. Songxin Zhao


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2025 in Buildings
Verified
Journal Article
Open access
PDF file
KLKaide Liu
Kaide Liu
SZSongxin Zhao
Songxin Zhao
DWDingbo Wang
Dingbo Wang
WYWenping Yue
Wenping Yue
CSChaowei Sun
Chaowei Sun
QWQiyu Wang
Qiyu Wang
This study takes limestone crushed stone concrete as the research object and systematically investigates its mechanical property changes and microstructural damage characteristics under different confining pressures using triaxial compression tests, scanning electron microscope (SEM) tests, and digital image processing techniques. The results show that, in terms of macro-mechanical properties, as the confining pressure increases, the peak strength increases by 192.66%, the axial peak strain increases by 143.66%, the elastic modulus increases by 133.98%, and the ductility coefficient increases by 54.61%. In terms of microstructure, the porosity decreases by 64.35%, the maximum pore diameter decreases by 75.69%, the fractal dimension decreases by 19.56%, and the interfacial transition zone cracks gradually extend into the aggregate interior. The optimization of the microstructure makes the concrete more compact, reduces stress concentration, and thereby enhances the macro-mechanical properties. Additionally, the failure characteristics of the specimens shift from diagonal shear failure to compressive flow failure. According to the Mohr–Coulomb strength criterion, the calculated cohesion is 6.96 MPa, the internal friction angle is 38.89°, and the breakage angle is 25.53°. A regression analysis established a quantitative relationship between microstructural characteristics and macro-mechanical properties, revealing the significant impact of microstructural characteristics on macro-mechanical properties. Under low confining pressure, early volumetric expansion and rapid volumetric strain occur, with microcracks mainly concentrated at the aggregate interface that are relatively wide. Under high confining pressure, volumetric expansion is delayed, volumetric strain increases slowly, and microcracks extend into the interior of the aggregate, becoming finer and more dispersed.

17 July 2025 in Materials
Verified
Journal Article
Open access
PDF file
KLKaide Liu
Kaide Liu
SZSongxin Zhao
Songxin Zhao
YGYaru Guo
Yaru Guo
WYWenping Yue
Wenping Yue
CSChaowei Sun
Chaowei Sun
XWXinping Wang
Xinping Wang
In response to the high-performance requirements of concrete materials under complex triaxial stress states and water-containing environments in marine engineering, this study focuses on water-containing basalt fiber-reinforced concrete (BFRC). Uniaxial compression and splitting tensile tests were conducted on specimens with different fiber contents (0.0%, 0.05%, 0.10%, 0.15%, and 0.20%) to determine the optimal fiber content of 0.1%. The compressive strength of the concrete with this fiber content increased by 13.5% compared to the control group without fiber, reaching 36.90 MPa, while the tensile strength increased by 15.9%, reaching 2.33 MPa. Subsequently, NMR and SEM techniques were employed to analyze the internal pore structure and micro-morphology of BFRC. It was found that an appropriate amount of basalt fiber (content of 0.1%) can optimize the pore structure and form a reticular three-dimensional structure. The pore grading was also improved, with the total porosity decreasing from 7.48% to 7.43%, the proportion of harmless pores increasing from 4.03% to 4.87%, and the proportion of harmful pores decreasing from 1.67% to 1.42%, thereby significantly enhancing the strength of the concrete. Further triaxial compression tests were conducted to investigate the mechanical properties of BFRC under different confining pressures (0, 3, and 6 MPa) and water contents (0%, 1%, 2%, and 4.16%). The results showed that the stress–strain curves primarily underwent four stages: initial crack compaction, elastic deformation, yielding, and failure. In terms of mechanical properties, when the confining pressure increased from 0 MPa to 6 MPa, taking dry sandstone as an example, the peak stress increased by 54.0%, the elastic modulus increased by 15.7%, the peak strain increased by 37.0%, and the peak volumetric strain increased by 80.0%. In contrast, when the water content increased from 0% to 4.16%, taking a confining pressure of 0 MPa as an example, the peak stress decreased by 27.4%, the elastic modulus decreased by 43.2%, the peak strain decreased by 59.3%, and the peak volumetric strain decreased by 106.7%. Regarding failure characteristics, the failure mode shifted from longitudinal splitting under no confining pressure to diagonal shear under confining pressure. Moreover, as the confining pressure increased, the degree of failure became more severe, with more extensive cracks. However, when the water content increased, the failure degree was relatively mild, but it gradually worsened with further increases in water content. Based on the CDP model, a numerical model for simulating the triaxial compression behavior of BFRC was developed. The simulation results exhibited strong consistency with the experimental data, thereby validating the accuracy and applicability of the model.

21 August 2026 in Processes
Verified
Journal Article
Open access
PDF file
KLKaide Liu
Kaide Liu
XYXia Yu
Xia Yu
KYKaiwen Yao
Kaiwen Yao
SZSongxin Zhao
Songxin Zhao
WYWenping Yue
Wenping Yue
XWXinping Wang
Xinping Wang
The Dafosi well field is a typical Huang-Long Jurassic low-rank coalbed methane (CBM) field. Clarifying its CBM geochemical characteristics and the mechanisms of its formation is of significant importance for deepening the understanding of the formation mechanisms of low-rank CBM in China and for the scientific assessment of its resource potential. A total of eight gas emission samples from six coalbed methane wells in the Dafosi coalfield were collected, along with 22 coal samples from the 4# coal seam. Detailed analyses of microscopic coal petrographic components, gas chemical compositions, and carbon isotopes were performed. By integrating data from the 20 relevant literature sources on coalbed gas composition and isotopic characteristics within the study area, a comprehensive dataset comprising 28 sets was utilized to examine the carbon isotope characteristics and genesis types of both CH4 and CO2 in the coalbeds, as well as elucidate the mechanism behind CH4 carbon isotope depletion. The findings indicate that in the primary 4# coal seam’s microscopic petrographic composition, the organic matter content is considerably higher, averaging 93.2%. Among these, the inertinite group is dominant, averaging 68.2%; the vitrinite group is the next most abundant, averaging 22.8%. The CBM composition is predominantly CH4, with concentrations varying from 68.753% to 98.006%, averaging 80.276%. N2 concentrations range from 1.259% to 29.926%, averaging 17.476%. CO2 concentrations vary from 0.04% to 2.380%, averaging 1.032%. The average concentration of heavier hydrocarbons C2 and above is less than 0.078%, indicative of typical dry gas characteristics, C1/C1~n > 0.999. The concentration of CH4 and N2 was negatively correlated. δ13C1 ranges from −87.200‰ to −62.400‰, averaging −75.802‰. CH4 is composed of secondary biogenic gas with dominant content and a small amount of thermogenic gas. δ13CCO2 ranges from −41.693‰ to −7.065‰, averaging −20.016‰. CO2 is an organic gas, mainly derived from thermal degradation and microbial degradation of organic matter. The mechanism responsible for the light carbon isotopic composition of δ13C1 lies in the fact that most of CH4 is produced by CO2 reduction, and a small amount is produced by acetic acid fermentation. In the gas generation process of these two pathways, biogenic methane will eventually enrich light carbon isotopes, resulting in light δ13C1.

24 August 2026 in Buildings
Verified
Journal Article
Open access
PDF file
KLKaide Liu
Kaide Liu
XWXinping Wang
Xinping Wang
XYXia Yu
Xia Yu
WYWenping Yue
Wenping Yue
KYKK Yuan
KK Yuan
SZSongxin Zhao
Songxin Zhao
Water-retaining roller-compacted concrete (RCC) dams suffer severe deterioration under coupled moisture ingress and freeze–thaw (F-T) cycles. To elucidate the damage mechanisms, this study employed industrial X-ray computed tomography (CT) synchronized with uniaxial compression and acoustic emission (AE) monitoring. The cross-scale damage evolution of RCC was investigated under dry, water-saturated, 25, and 50 F-T cycle conditions. The results indicate the following: (1) Macroscopically, F-T damage causes linear peak stress attenuation, shifting the failure mode from brittle axial splitting to ductile oblique shear. (2) Mesoscopically, frost-heaving stress expands native mesopores (500–2500 μm), increasing their volume fraction from 8.45% to 14.86% and remodeling isolated voids into a 3D interconnected defect network. (3) Microscopically, GMM-based AE clustering reveals a fracture transition. Driven by moisture lubrication and defect propagation, global shear cracks surpass the 50% threshold at 25 cycles (53.5%), reaching 68.6% at 50 cycles. (4) For cross-scale mapping, calibrating the AE b-value via Aki’s method decouples pore-water signal attenuation. Its pre-peak characteristic (an initial decrease followed by a rebound) accurately maps microcracks unstably coalescing along interconnected pores to form macroscopic shear planes. This cross-scale mechanism provides a scientific paradigm for condition monitoring of massive concrete in cold regions.