Kaide Liu

Dr. Kaide Liu

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
KLKaide Liu
Kaide Liu
SZSongxin Zhao
Songxin Zhao
LDLu Diao
Lu Diao
WYWenping Yue
Wenping Yue
CSChaowei Sun
Chaowei Sun
YXYu Xia
Yu Xia
To provide a theoretical basis for the development of water hazard prevention schemes for roof sandstone, this study systematically conducts uniaxial compression, acoustic emission, scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) tests on the thick water-bearing sandstone at depths of 623–943 m in the Luohe Formation of the Binchang Mining Area, investigating its mechanical properties and the mechanisms of micro-damage evolution under uniaxial compression.The results indicate that with the increase in water content, the elastic modulus, strength, peak strain, and brittleness index of sandstone decrease. Dry sandstone primarily undergoes shear failure, while water-saturated sandstone mainly experiences a combination of tensile and shear failure. The cumulative ring count of acoustic emission in water-saturated sandstone decreases with increasing water content, and the damage evolution can be divided into three stages: the initial damage stage, the stable damage development stage, and the rapid damage increase stage. The damage variable of water-saturated sandstone increases with the rise in water content. The uniaxial compression fracture characteristics of dry and saturated sandstone include intergranular and transgranular fractures, primarily exhibiting brittle failure. In dry sandstone, the contents of Si, Fe, Ca, Na and Al are relatively high, while in water-saturated sandstone, these contents decrease, but the Carbon(C) content significantly increases. The average grain size of saturated sandstone is smaller than that of dry sandstone, and the strength of sandstone decreases with the reduction in grain size.The main components of sandstone include feldspar, calcite, muscovite, and quartz, among these, quartz endows the sandstone with higher strength, and the strength of the sandstone decreases with a reduction in the quartz content.

18 July 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
DXdingjun xiao
dingjun xiao
WYWentao Yang
Wentao Yang
MLMoujin Lin
Moujin Lin
XLXiaoming Lü
Xiaoming Lü
KLKaide Liu
Kaide Liu
YLYu Long
Yu Long
To study the influences of an explosion-proof wall on shock wave parameters, an air explosion protection experiment was performed, the time history of shock wave pressure at different positions before and after the explosion-proof wall was established, and the characteristics of shock wave impulse and dynamic pressure were analyzed. The explosion-proof working conditions of five different diffraction angles were simulated and analyzed using Autodyn software(2019R3). Results indicated the following findings. The explosion-proof wall exerted an evident attenuation effect on the explosion shock wave, but considerable pressure still existed at the top of the explosion-proof wall. Overpressure behind the wall initially increased and then decreased. The larger the diffraction angle, the faster the attenuation speed of the diffraction overpressure of the shock wave in the air behind the wall. The history curve of shock wave pressure exhibited an evident bimodal structure. The shock wave diffraction of the wall made the shock wave bimodal structure behind the wall more prominent. The characteristics of the bimodal structure behind the wall (the interval time of overpressure peak Δt was less than the normal phase time of the diffracted shock wave T+) caused the shock wave impulse to stack rapidly, significantly improving its damage capability. The peak value of dynamic pressure on the oncoming surface was approximately two times the peak value of overpressure, and the inertia of air molecules resulted in a longer positive duration of dynamic pressure than overpressure. The maximum overpressure on the ground behind the explosion-proof wall appeared at approximately two times the height of the explosion-proof wall, while the maximum overpressure in the air behind the explosion-proof wall appeared at approximately one times the height of the explosion-proof wall. The relatively safe areas on the ground and in the air behind the wall were approximately 4–4.5 times and 3.5–4 times the height of the explosion-proof wall, respectively.

1 July 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
KLKaide Liu
Kaide Liu
QWQiyu Wang
Qiyu Wang
SZSongxin Zhao
Songxin Zhao
WYWenping Yue
Wenping Yue
CSChaowei Sun
Chaowei Sun
YXYu Xia
Yu Xia
One important factor influencing the gas/water two-phase seepage during coalbed methane extraction is the absolute permeability of coal reservoirs. The sensible design of a surface coalbed methane drainage system and the enhancement of drainage efficiency depend heavily on the quick and precise prediction of this parameter. The Huanglong Jurassic No. 4 coal seam sample from the Dafosi Coal Mine in the Binchang Mining Area serves as the research object for this study, which employs low-field nuclear magnetic resonance (LF-NMR) technology and high-temperature and high-pressure displacement equipment. The LF-NMR technique was employed to test coal reserves under thermal–mechanical coupling conditions. In conjunction with fractal theory, the association between the absolute permeability and the fractal dimension of coal reservoirs was examined, as well as the dynamic evolution features of the fractal dimension of the pore structure of coal reservoirs under thermal coupling settings. The fractal dimension of the pore structure was used to create a permeability prediction model. According to the study, the fractal map of the coal reservoir’s pore structure in its initial form contains clear inflection points that allow one to differentiate between the almost straight and curved segments. The fractal dimension D1 of the bound pore segment is linearly negatively correlated with the absolute permeability. By contrast, the D2 of the connected pore segment is exponentially negatively correlated with the absolute permeability. By identifying the inflection points in the diagram, T2cut-off can be rapidly ascertained to avoid the centrifugation test operation process. The absolute permeability prediction model based on the fractal dimension of the pore structure determined in this work may significantly streamline the experimental procedures while maintaining the accuracy of the prediction findings compared to the conventional NMR absolute permeability model. With just the NMR T2 spectrum of the saturated sample, the model can determine its absolute permeability in real-time.

29 September 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
YJYadong Ji
Yadong Ji
KZKaipeng Zhu
Kaipeng Zhu
KLKai Li
Kai Li
CZChunhu Zhao
Chunhu Zhao
KLKaide Liu
Kaide Liu
SZSongxin Zhao
Songxin Zhao
The Huanglong Coalfield faces the threat of water hazards from the thick Luhe Formation sandstone roof. This study focuses on the coarse, medium, and fine sandstones of the Luhe Formation in Gaojiabu Coal Mine, and employs a comprehensive suite of techniques, including SEM-EDS, XRD, µ-CT, Rietveld refinement, Avizo, and Comsol to systematically investigate the micro-pore structure characteristics and seepage mechanisms of the three types of sandstones. The results show that in the two-dimensional pore structure, the pore types of the three sandstones are mainly intergranular pores and dissolution pores, with pore-throat types dominated by constricted and curved lamellar throats. The porosity (19.24%, 13.34%, 12.27%), pore size distribution ranges (2.26–401.05 μm, 2.26–206.54 μm, 2.26–181.50 μm), fractal dimensions (1.499, 1.488, 1.453), and average grain diameters (268.494 μm, 242.234 μm, 175.781 μm) of the coarse, medium, and fine sandstones decrease progressively. In terms of mineral composition, the three sandstones are primarily composed of feldspar and quartz. The three-dimensional pore structure shows that the connected porosity (12.175%, 10.790%, 9.949%), pore radius distribution range (3.102–180.119 μm, 3.102–165.043 μm, 3.102–152.544 μm), average pore-throat radius (20.777 μm, 16.804 μm, 15.984 μm), and average coordination number (2.499, 1.632, 1.502) of coarse, medium, and fine sandstones decrease in sequence, while the fractal dimension of connected pores (2.333, 2.344, 2.354) and average tortuosity (1.672, 1.719, 1.822) increase in sequence. In terms of seepage numerical simulation, the connectivity (98.222%, 94.478%, 92.218%) and permeability (1.104 D, 0.310 D, 0.135 D) of coarse, medium, and fine sandstones decrease in sequence, while the frequency of low-speed zones (66.59%, 78.95%, 88.50%) increases in sequence. The research findings can provide a theoretical basis for the roof pre-grouting water-blocking and water-reducing projects in Gaojiabu Mine of the Huanglong Coalfield.

8 May 2024 in Buildings
Verified
Journal Article
Open access
PDF file
WZWenlong Zhang
Wenlong Zhang
JYJiajia Yu
Jiajia Yu
XXXiufeng Xu
Xiufeng Xu
JRJianju Ren
Jianju Ren
KLKaide Liu
Kaide Liu
HSHuifang Shi
Huifang Shi
The localization results of acoustic emission (AE) events can reflect the location and pattern of burst-prone rock failures. However, event localization heavily depends on the quality of the original waveform of the sensor. Therefore, this study analyzed the AE waveform of a rock sample under compression to evaluate its failure localization and quality. From the research results, it could be seen that the initial failure was relatively calm, with clear take-off points, which can be better used for accurate AE event positioning. However, the later failure was severe, causing the take-off points of most sensors to be very unclear, and positioning methods that rely on take-off points cannot be used for positioning, let alone simply using the positioning results of the built-in software. This research result reminds researchers who use AE signals for event localization to first examine the quality and status of the original waveform, providing a basis for obtaining accurate localization results, in order to further accurately study the subsequent failure patterns. The above facts indicate that the initial failure is small and scattered, while the later failure is large and concentrated, with certain fractal characteristics.

2 June 2025 in Buildings
Verified
Journal Article
Open access
PDF file
KLKaide Liu
Kaide Liu
SZSongxin Zhao
Songxin Zhao
DWDingbo Wang
Dingbo Wang
WYWenping Yue
Wenping Yue
CSChaowei Sun
Chaowei Sun
QWQiyu Wang
Qiyu Wang
This study takes limestone crushed stone concrete as the research object and systematically investigates its mechanical property changes and microstructural damage characteristics under different confining pressures using triaxial compression tests, scanning electron microscope (SEM) tests, and digital image processing techniques. The results show that, in terms of macro-mechanical properties, as the confining pressure increases, the peak strength increases by 192.66%, the axial peak strain increases by 143.66%, the elastic modulus increases by 133.98%, and the ductility coefficient increases by 54.61%. In terms of microstructure, the porosity decreases by 64.35%, the maximum pore diameter decreases by 75.69%, the fractal dimension decreases by 19.56%, and the interfacial transition zone cracks gradually extend into the aggregate interior. The optimization of the microstructure makes the concrete more compact, reduces stress concentration, and thereby enhances the macro-mechanical properties. Additionally, the failure characteristics of the specimens shift from diagonal shear failure to compressive flow failure. According to the Mohr–Coulomb strength criterion, the calculated cohesion is 6.96 MPa, the internal friction angle is 38.89°, and the breakage angle is 25.53°. A regression analysis established a quantitative relationship between microstructural characteristics and macro-mechanical properties, revealing the significant impact of microstructural characteristics on macro-mechanical properties. Under low confining pressure, early volumetric expansion and rapid volumetric strain occur, with microcracks mainly concentrated at the aggregate interface that are relatively wide. Under high confining pressure, volumetric expansion is delayed, volumetric strain increases slowly, and microcracks extend into the interior of the aggregate, becoming finer and more dispersed.