Road surfacing is crucial in improving community accessibility and mobility. Adopting sustainable measures is extremely important to prevent the significantly high environmental burdens associated with road pavement systems production. This study presents a comparative life cycle assessment of traditional pavement systems and their sustainable alternatives made and tested at the London South Bank University laboratories. The low-impact pavement mixes proposed herein provide a novel, innovative method for producing sustainable road systems. Unlike traditional approaches, these asphalt mixes utilise materials derived from recycled polyethylene terephthalate (plastics) and carbonated aggregates and are produced at temperatures significantly lower (warm mix).
This paper presents a comprehensive review of dealuminated metakaolin (DK), a hazardous industrial by-product generated by the aluminium sulphate (alum) industry and evaluates its potential as a component in cementitious systems for the partial or full replacement of Portland cement (PC). Positioned within the context of waste valorisation in concrete, the review aims to establish a critical understanding of DK formation, properties, and reactivity, particularly its pozzolanic potential, to assess its suitability for use as a supplementary cementitious material (SCM), or as a precursor in alkali-activated cement (AAC) systems for concrete. A systematic methodology is used to extract and synthesise relevant data from existing literature concerning DK and its potential applications in cement and concrete. The collected information is organised into thematic sections exploring key aspects of DK, beginning with its formation from kaolinite ores, followed by studies on its pozzolanic reactivity. Applications of DK are then reviewed, focusing on its integration into SCMs and alkali-activated cement (AAC) systems. The review consolidates existing knowledge related to DK, identifying scientific gaps and practical challenges that limit its broader adoption for cement and concrete applications, and outlines future research directions to provide a solid foundation for future studies. Overall, this review highlights the potential of DK as a low-carbon, circular-economy material and promotes its integration into efforts to enhance the sustainability of construction practices. The findings aim to support researchers’ and industry stakeholders’ strategies to reduce cement clinker content and mitigate the environmental footprint of concrete in a circular-economy context.
1 August 2025 in IOP Conference Series: Earth and Environmental Science
This research investigates the potential for producing more environmentally friendly mortars by replacing cement with Ground Granulated Blast Furnace Slag (GGBS). The study examines the influence of key factors on the properties of GGBS-based mortar activated using sodium silicate (SS) and sodium hydroxide (NaOH). Specifically, it explores: (1) the effect of different SS types—base and neutral type; (2) the sodium oxide (Na₂O) content, derived from both activators, with concentrations of 12% and 15%; (3) the impact of curing methods, including ambient temperature curing and full water immersion (submerged); and (4) the role of the water-to-binder (w/b) ratio, assessed at 43% and 48%. The performance of GGBS mortars was evaluated in terms of compressive strength and flowability. The results showed no significant difference between the two SS types; however, the base SS was recommended due to its lower NaOH content to reach the same Na₂O content, which leads to reduced generated heat when preparing the solution. Additionally, a 12% Na₂O concentration yielded higher compressive strength and enhanced flowability. While increasing the w/b ratio improved flowability, it had a detrimental effect on compressive strength. Furthermore, submerged curing significantly reduced compressive strength compared to ambient curing.
This scoping study assesses practical aspects of electrokinetic (EK) biocementation of clay soil underneath a railway embankment ahead of upscaled testing to include a reduced-scale field pilot as an intermediate step towards subsequent pilot embankment treatment. It considers suitable field setups and performs Life Cycle Analysis (LCA) of biocementation by biostimulation of carbonic anhydrase (CA)-producing bacteria compared to hydrated lime slurry, if both treatments were implemented electrokinetically. LCA analysis was conducted using SimaPro software (version 9.6.0.1) with Ecoinvent database and bench-scale laboratory testing data. Electroosmotic flow modelling was performed to instruct on suitable setups and for estimates of power consumption towards the field application of 30 m of railway embankment and foundation soil. LCA indicated a considerable reduction in global warming if CA biocementation is used (0.00823 kg CO2 eq for biocement vs. 0.022136 kg CO2 eq for lime), and resource usage (7.06 × 10−5 kg Cu eq compared to 8.47 × 10−5 kg Cu eq for lime). Biocementation was more water-consuming compared to lime, as it involved multiple chemical solutions. Terrestrial acidification, aquatic eutrophication, and ecotoxicity were slightly higher for biocement, possibly due to system boundaries and processes assumed for material production. Further sustainability improvements would be possible if waste materials (e.g., captured industrial CO2) could be used. Field trials will be essential for validation, system optimisation, and advanced model calibration.