Construction industry is considered to be one of the most hazardous industries in the world. The reason could be attributed to its hazardous nature as it is an accident-prone industry. Thus, a need for better understanding of safety management system is essential for improving safety performance in this sector. This paper discusses briefly the elements of safety management by presenting different systems (such as Oregon OSHA Occupational Health and Safety Administration, and OTAR Overseas Territories Aviation Circle) and elaborating their elements. It also discusses two types of measuring safety performance the first is the lagging indicators and the second is the leading indicator. In addition, a field study was conducted to explore contractors’ perception on safety management. A questionnaire was distributed to construction firms. 200 responses were collected and analyzed. All of the results showed positive answers which indicate that safety in performance in Egypt is slightly above average as all means were close to average.
1 August 2025 in IOP Conference Series: Earth and Environmental Science
This research investigates the potential for producing more environmentally friendly mortars by replacing cement with Ground Granulated Blast Furnace Slag (GGBS). The study examines the influence of key factors on the properties of GGBS-based mortar activated using sodium silicate (SS) and sodium hydroxide (NaOH). Specifically, it explores: (1) the effect of different SS types—base and neutral type; (2) the sodium oxide (Na₂O) content, derived from both activators, with concentrations of 12% and 15%; (3) the impact of curing methods, including ambient temperature curing and full water immersion (submerged); and (4) the role of the water-to-binder (w/b) ratio, assessed at 43% and 48%. The performance of GGBS mortars was evaluated in terms of compressive strength and flowability. The results showed no significant difference between the two SS types; however, the base SS was recommended due to its lower NaOH content to reach the same Na₂O content, which leads to reduced generated heat when preparing the solution. Additionally, a 12% Na₂O concentration yielded higher compressive strength and enhanced flowability. While increasing the w/b ratio improved flowability, it had a detrimental effect on compressive strength. Furthermore, submerged curing significantly reduced compressive strength compared to ambient curing.