The leaching of material from concrete fracture surfaces has an impact on the structural concrete in service, but the number of studies that consider the effect of the coupling of the leaching, fracture geometry and hydraulic processes on concrete fractures is insufficient. In this study, a series of experiments was conducted, and a leaching model proposed, to investigate the mechanism of leaching behavior on the geometric and hydraulic characteristics of concrete fractures. Following the leaching experiment, the evolution of fracture geometric characteristics was observed by a three-dimensional (3D) laser scanning technique, finding that the fracture produces residual leached depth and local uneven leaching, which results in a decrease in roughness. The hydraulic characteristics were then investigated by permeability tests, and it was found that the fracture hydraulic aperture and permeability increase monotonically with leaching time. A simulation of fluid flow in a numerical fracture revealed the effect of residual leached depth and a decrease in roughness on the hydraulic characteristics. Finally, based on the analysis of the chemical composition of the leaching solution, a leaching model of concrete rough fracture surface is proposed and the mechanism of leaching behavior is discussed. These new findings are useful for the understanding of the development of leaching, local to concrete fracture surfaces.
11 January 2022 in Advances in Materials Science and Engineering
The distribution characteristics of hydraulic gradient in embankment are closely related to seepage failure. Seepage failures such as flowing soil and piping will lead to serious damage and even the overall failure of embankment. The hydraulic conductivity has strong spatial variability, which changes the distribution of hydraulic gradient in embankment and increases the difficulty for predicting the embankment seepage instability. In this study, the distribution of soil hydraulic conductivity in a section of Shijiu Lake embankment was obtained by the permeability test. Based on Local Average Subdivision technique, a three-dimensional multilayer random field of embankment hydraulic conductivity was generated. Then, the mean and standard deviation of overflow point height and hydraulic gradient were calculated by the Monte Carlo method, which combined the generated three-dimensional random model and the deterministic analysis method of seepage field. Finally, the coefficient of variation (COV) of hydraulic conductivity (0.1, 0.3, 0.5, 0.7, 1.0, 2.0, and 3.0), the fluctuation scale in vertical direction (3 m) and the fluctuation scale in horizontal plane (3 m, 6 m, 12 m, 24 m, 36 m, and 48 m) were selected respectively for analyzing the random characteristics of embankment overflow point height and hydraulic gradient under the influence of different COV and fluctuation scale of embankment soil hydraulic conductivity.