Serkan Aktas

Dr. Serkan Aktas

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2024 in Materials Research Express
Verified
Journal Article
Open access
YKYiğit Karabulut
Yiğit Karabulut
EMErkan Meşe
Erkan Meşe
Murat AyazMurat Ayaz
Murat Ayaz
SASerkan Aktas
Serkan Aktas
This study aims to compare the soft magnetic composite (SMC) and grain-oriented (GO) steel stator axial flux permanent-magnet synchronous machine (AFPMSM) in terms of performance and iron losses. Stator cores are manufactured using both materials to perform experimental performance tests. The produced machines are designed for pump propulsion systems in left ventricular assist devices as an application area. The machines are modeled with several analytical equations, and iron losses and performance tests are carried out with AFPMSMs, finite element methods, and experimental setups. Our findings show that the torque density is higher in the GO steel stator AFPMSMs that can produce 15.07 percent more torque. GO steel material experimentally has 20.33 percent less iron loss as SMC material since the loss value per kilogram for SMC material is higher than that for GO steel. In addition, the saturation value of the SMC material is lower than that of the GO material according to the magnetic flux density value.

7 February 2025 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
YKYiğit Karabulut
Yiğit Karabulut
UAUfuk Ayhan
Ufuk Ayhan
SASerkan Aktas
Serkan Aktas
Murat AyazMurat Ayaz
Murat Ayaz
EMErkan Meşe
Erkan Meşe
This paper addresses the design and thermal analysis of Axial Flux Permanent Magnet Synchronous Machines (AFPMSMs) integrated into flow left ventricular assist devices (LVADs). Allowed temperature rise limitation due to medical application was the primary motivation of this research. Thermal challenges are further elevated due to the limited volume, which increases the thermal loading of the motor. Furthermore, effective cooling of both the rotor and stator was achieved, which is an innovative aspect of this work. Within the scope of this study, the thermal aspects of AFPMSMs specifically for LVAD pumps were examined, and their validations were carried out through analytical calculations and simulation studies along with some experimental work. It was validated by the FEA that the temperature of the fluid at the LVAD pump inlet under rated load increased by only 0.04°C. Therefore, the pump design presented does not pose any risks to the patient. Subsequently, to validate the design, an AFPMSM prototype was produced and tested in a laboratory environment. These tests showed that under the rated load, the winding temperature increase was 26.5°C, and the outer case temperature increase was 15.1°C. These results are consistent with both analytical and simulation results. This study demonstrated that the LVAD pump design is thermally suitable and that the established analytical equations are accurate in both simulation and experimental tests. Additionally, the novel integration of AFPMSM and pump yielded significantly higher current-carrying capacity due to the devised effective cooling mechanism.

28 August 2023 in The Journal of Prosthetic Dentistry
Verified
Journal Article
Closed access
AAAbdulrahman Al-Sanea
Abdulrahman Al-Sanea
SASerkan Aktas
Serkan Aktas
TCTalip Celik
Talip Celik
YKYasin Kisioglu
Yasin Kisioglu

1 August 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Serkan SezenSerkan Sezen
Serkan Sezen
Kadir YılmazKadir Yılmaz
Kadir Yılmaz
SASerkan Aktas
Serkan Aktas
Murat AyazMurat Ayaz
Murat Ayaz
TDTaner Dindar
Taner Dindar
Magnetic gears (MGs) are attracting increasing attention in power transmission systems due to their contactless operation principles, low frictional losses, and high efficiency. However, the broad application potential of these technologies requires a comprehensive evaluation of engineering parameters, such as material selection, energy efficiency, and structural design. This review focuses solely on solid-core magnetic gear systems designed using laminated electrical steels, soft magnetic composites (SMCs), and high-saturation alloys. This review systematically examines the topological diversity, torque transmission principles, and the impact of various core materials, such as electrical steels, soft magnetic composites (SMCs), and cobalt-based alloys, on the performance of magnetic gear systems. Literature-based comparative analyses are structured around topological classifications, evaluation of material properties, and performance analyses based on losses. Additionally, the study highlights that aligning material properties with appropriate manufacturing methods, such as powder metallurgy, wire electrical discharge machining (EDM), and precision casting, is essential for the practical scalability of magnetic gear systems. The findings reveal that coaxial magnetic gears (CMGs) offer a favorable balance between high torque density and compactness, while soft magnetic composites provide significant advantages in loss reduction, particularly at high frequencies. Additionally, application trends in fields such as renewable energy, electric vehicles (EVs), aerospace, and robotics are highlighted.

24 July 2025 in Physica Scripta
Verified
Journal Article
Open access
Murat AyazMurat Ayaz
Murat Ayaz
YKYiğit Karabulut
Yiğit Karabulut
SASerkan Aktas
Serkan Aktas
EMErkan Meşe
Erkan Meşe
The performance and longevity of Ventricular Assist Devices (VADs) depend on an optimized drive system that balances energy efficiency, torque density, and spatial constraints. VADs, as battery-powered systems, require minimal energy consumption, while maximizing torque output for reliable operation. This study compares three small-scale Permanent Magnet Synchronous Machine (PMSM) topologies—Radial Flux (RFPMSM), Axial Flux (AFPMSM), and Outer Rotor (ORPMSM)—to determine the most suitable VAD drive system. Analytical modeling and 3D finite element analysis (FEA) evaluate key performance metrics, including torque production, back-EMF, efficiency, and losses. Results show that RFPMSM offers the highest torque density but increases device volume (110.4 cc); while AFPMSM is the most compact (66.4 cc) but has lower efficiency (65%). ORPMSM achieves the highest efficiency (84%) with a balanced footprint, making it ideal for compact, energy-efficient designs. An optimized RFPMSM design reduces its volume to 88.4 cc, improving feasibility for space-constrained applications. These findings emphasize that motor selection should prioritize efficiency, manufacturability, and seamless VAD integration to enhance next-generation implantable devices.

4 July 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Serkan SezenSerkan Sezen
Serkan Sezen
Kadir YılmazKadir Yılmaz
Kadir Yılmaz
SASerkan Aktas
Serkan Aktas
Murat AyazMurat Ayaz
Murat Ayaz
TDTaner Dindar
Taner Dindar
Magnetic gears (MGs) are attracting increasing attention in power transmission systems due to their contactless operation principles, low frictional losses, and high efficiency. However, the broad application potential of these technologies requires a comprehensive evaluation of engineering parameters such as material selection, energy efficiency, and structural design. This review systematically examines the topological diversity, torque transmission principles, and the impact of various core materials such as electrical steels, soft magnetic composites (SMCs), and cobalt-based alloys on the performance of magnetic gear systems. Literature-based comparative analyses are structured around topological classifications, evaluation of material properties, and performance analyses based on losses. Additionally, the study highlights that aligning material properties with appropriate manufacturing methods such as powder metallurgy, wire electrical discharge machining (EDM), and precision casting is essential for the practical scalability of magnetic gear systems. The findings reveal that coaxial magnetic gears (CMGs) offer a favorable balance between high torque density and compactness, while soft magnetic composites provide significant advantages in loss reduction, particularly at high frequencies. Additionally, application trends in fields such as renewable energy, electric vehicles (EVs), aerospace, and robotics are highlighted.