Long-length, high-temperature superconducting (HTS) wires capable of carrying high critical current, Ic, are required for a wide range of applications. Here, we report extremely high performance HTS wires based on 5 μm thick SmBa2Cu3O7 − δ (SmBCO) single layer films on textured metallic templates. SmBCO layer wires over 20 meters long were deposited by a cost-effective, scalable co-evaporation process using a batch-type drum in a dual chamber. All deposition parameters influencing the composition, phase, and texture of the films were optimized via a unique combinatorial method that is broadly applicable for co-evaporation of other promising complex materials containing several cations. Thick SmBCO layers deposited under optimized conditions exhibit excellent cube-on-cube epitaxy. Such excellent structural epitaxy over the entire thickness results in exceptionally high Ic performance, with average Ic over 1,000 A/cm-width for the entire 22 meter long wire and maximum Ic over 1,500 A/cm-width for a short 12 cm long tape. The Ic values reported in this work are the highest values ever reported from any lengths of cuprate-based HTS wire or conductor.
20 September 2006 in Superconductor Science and Technology
Effect of filament configuration and heat treatment of Bi2212/Ag round wire with low Ag ratio on the engineering critical current density (Je) was reported. We have fabricated 557, 85 7, and 121 7 wires with different Ag ratio and evaluated at various wire diameters. We have also changed the parameters of heat treatment. The effects of maximum process temperature (Tmax)and soaking time at Tmax and average filament diameter on the Je were also studied. 121 7 wire of 0.95 mm diameter heat-treated at showed Je of 858mm2 at 4.2K, 0 T.
23 April 2012 in Superconductor Science and Technology