Cable conductors fabricated by bundling coated conductors to increase the transport current have been developed for large-scale electric applications such as highly magnetic field magnets, large accelerators and fusion reactors. Various types of cable conductors (CORC cables, Roebel cables, TSTC and round wires) have been fabricated using coated conductors; however, these cable conductors do not have a high engineering critical current density ( Je ) required high performance in large-scale applications. In this study, new high temperature superconducting (HTS) multilayered conductors have been fabricated to increase the critical current and Je of coated conductors as cable conductors. The property of easy exfoliation owing to the weak c -axis strength of coated conductors is used to fabricate multi layered HTS conductors. In order to stack and bond multiple-HTS layers on one substrate (MHOS), a silver diffusion bonding technique using only a silver plated coated conductor is adopted. The MHOS conductor consists of multiple, biaxial-, textured, superconducting layers without any intermediate epitaxial grown buffer layer or solder layer between them. A 1 m long 4-MHOS conductor was successfully fabricated to proposed fabrication process; it exhibited a high critical current (2484 A/12 mm-w) and high engineering critical current density ( Je = 0.12 MA cm −2 ). The critical current of the fabricated MHOS conductor at liquid nitrogen temperature (65–77 K) with a magnetic field ranging from 0 to 6 T increased proportionally with the number of superconducting layers.
In this article, we present a newly developed continuous thickness measurement system for long-length high-temperature superconducting (HTS) coated conductors (CCs). Uniform thickness in HTS CCs is critical for maintaining consistent magnetic field performance and mechanical integrity, particularly in applications such as superconducting coil windings. Our system employs a reel-to-reel (R2R) mechanism integrated with confocal laser sensors to enable real-time, non-contact thickness measurements. Comprehensive trials were carried out to evaluate the system's accuracy and precision, including static scans at various speeds and comparisons with cross-sectional analysis using optical microscopy. Additionally, the system demonstrated high precision, with repeatability confirmed through 10 repeated measurements along the length and width of a 12 m-long Cu-plated HTS CC. This development is expected to significantly improve the manufacturing process, enhance quality control, and support factory automation for consistent production of high-performance HTS magnets.
23 January 2025 in IEEE Transactions on Applied Superconductivity
The effective thermal conductivity of a high temperature superconductor (HTS) coil is an important parameter controlling the temperature of the coil in normal and off-normal operation. It is also a highly anisotropic parameter. While the thermal conductivity along the length is easily derived from the constituent materials, the radial direction thermal conductivity depends strongly on the fabrication method and surface conditions of the conductor. In this paper, three HTS coils are fabricated with insulation, no-insulation, and metal insulation winding schemes to evaluate the thermal conductivity in the radial direction, on a same winding form with a same winding tension. The thermal conductivity is measured by temperature difference in a conduction cooled experimental apparatus while applying heating to the outer surface of the HTS coils. The experiments are conducted by controlling the temperature from 20 K to 70 K. The measured effective thermal conductivity will be used to estimate the temperature distribution in the coil during charging/discharging operation and in the event of a quench.