The purpose of this study is to utilize the capabilities of a fuzzy PID controller for electric drives for a differential drive autonomous mobile robot trajectory application. The robot is powered by two non-identical electric motors. A self-tuning-parameter fuzzy PID controller is designed to control the rotation speed of the motors independently in order to achieve a straight trajectory of the motion despite the motor differences. Simulation of the robot drive system is carried out in a Matlab/Simulink environment. Simulations were used to evaluate performance of the fuzzy self-tuning parameter PID controllers in the time domain. Conclusions are drawn concerning the performance of the controller. Furthermore, expected challenges for the future development are discussed.
In this paper it is considered the technique design and algorithms for friction testing measuring implementation that are based upon the simulation of the real aircraft breaking modes while takeoff and landing via the measuring wheel. Moreover, the design problem of the controlled electromechanical simulator of the measuring wheel braking modes for the towed measuring vehicle is considered and adequate model implementation for the increasing the efficiency of the measuring system that consider the resilient behavior of the pneumatic tire and gearing system of the towed vehicle, and non-linear Coulomb friction with Stribeck effect. Effectiveness increasing of the braking modes simulation is provided using the neuro fuzzy control system. Real aircraft braking modes' simulator will provide the friction measuring results that will correlate with the real-life aircraft braking modes' characteristics.
1 March 2023 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Predictive diagnosis of motor defects can reduce repair and downtime costs of electrical equipment. This paper presents the results of a research on the effectiveness of the defect classification and recognition system based on convolutional neural network to detect defects in a squirrel-cage induction motor based on the stator supply voltage and output phase currents when supplied from an industrial grid of limited power with possible voltage asymmetry and harmonic distortion taken into account. In this work a simulation model, implemented in MATLAB/Simulink, is proposed to investigate unbalanced conditions. The mathematical model has been verified on a physical test bench and then used to create a database of currents from measured asymmetric grid voltages in the presence of defects such as short circuit between turns of one phase, rotor bar breakage, rotor eccentricity and bearing defects. The classification quality of all defects in the neural network was 72%, with the exclusion of intercoil short circuit defect and the merging of different bearing defects, the quality of the model was achieved 91%. A further increase in the quality of the defect recognition system is due to a building up modification of the neural network architecture.
The application of wavelet analysis used to model an electric load retrospective data representation is considered. "A trous" algorithm's application substantiation for the wavelet transform realization is adduced. Furthermore, it is shown that this model allows to increase the forecasting system's accuracy without overloading the system with a large amount of additional information.
The paper deals with principles of control software design. Such a software tools are widely used in modern paper production enterprise. Siemens SIMATIC Step-7 environment is implemented for software development (SCADA system (Supervisory Control And Data Acquisition)). Basic concept of program operation could be described as follows: control signal is generated by using real-time sensors' data. Example of creation operator panel interface with the overview its structure, are also included. This HMI (human-machine interface) contains schemes of production processes and helps operator to respond to untypical changes in manufacturing.
30 September 2014 in International Review of Automatic Control (IREACO)