The perpendicular exchange bias in NiO(antiferromagnet)/Co(ferromagnet) polycrystalline layer films is studied. It is found that the NiO layer forces the Co layer magnetization to be oriented perpendicular to the film plane in a greater thickness range than is found in the Au/Co/Au system. Simultaneously, a large coercivity and a significant perpendicular exchange bias field were observed that are owing to the interlayer exchange bias coupling between NiO and Co, which supports the perpendicular magnetic anisotropy of the Co layer. These findings are confirmed by magnetometry and magnetoresistance measurements.
The ability to induce and control the perpendicular magnetic anisotropy (PMA) of ferromagnetic layers has been widely investigated, especially those that offer additional functionalities (e.g., skyrmion stabilization, voltage-based magnetization switching, rapid propagation of domain walls). Out-of-plane magnetized ferromagnetic layers in direct contact with an oxide belong to this class. Nowadays, investigation of this type of system includes antiferromagnetic oxides (AFOs) because of their potential for new approaches to applied spintronics that exploit the exchange bias (EB) coupling between the ferromagnetic and the AFO layer. Here, we investigate PMA and EB effect in NiO/Co/Au and NiO/Co/NiO layered systems. We show that the coercive and EB fields increase significantly when the Co layer is coupled with two NiO layers, instead of one. Surrounding the Co layer only with NiO layers induces a strong PMA resulting in an out-of-plane magnetized system can be obtained without a heavy metal/ferromagnetic interface. The PMA arises from a significant surface contribution (0.74 mJ/m2) that can be enhanced up to 0.99 mJ/m2 by annealing at moderate temperatures (~450 K). Using field cooling processes for both systems, we demonstrate a wide-ranging control of the exchange bias field without perturbing other magnetic properties of importance.
1 August 2020 in Journal of Magnetism and Magnetic Materials
We studied the structural, chemical, and magnetic properties of Ti/Au/Co/Ni layered systems subjected to plasma oxidation. The process results in the formation of NiO at the expense of metallic Ni, as clearly evidenced by X-ray photoelectron spectroscopy, while not affecting the surface roughness and grain size of the Co/Ni bilayers. Since the decrease of the thickness of the Ni layer and the formation of NiO increase the perpendicular magnetic anisotropy, oxidation may be locally applied for magnetic patterning. Using this approach, we created 2D heterostructures characterized by different combinations of magnetic properties in areas modified by plasma oxidation and in the regions protected from oxidation. As plasma oxidation is an easy to use, low cost, and commonly utilized technique in industrial applications, it may constitute an improvement over other magnetic patterning methods.
As the demand for clean water continues to rise, the development of reliable and environmentally sustainable purification methods has become increasingly important. In this study, we describe the production and characterization of electrospun polyimide (PID) nanofibers modified with MXene (Ti3C2Tx), tungsten trioxide (WO3), and titanium dioxide (TiO2) nanomaterials for improved photocatalytic degradation of rhodamine 6G (R6G), a model organic dye. Superior photocatalytic performance was achieved by suppressing electron–hole recombination, promoting efficient charge carrier separation, and the significant increase in light absorption through the addition of metal oxide nanowires and MXene to the PID matrix. Comprehensive characterization confirms a core–shell nanofiber architecture with TiO2, WO3, and MXene effectively integrated and electronically coupled, consistent with the observed photocatalytic response. The PID/TiO2/WO3/MXene composite exhibited the highest photocatalytic activity among the tested configurations, degrading R6G by 74% in 90 min of light exposure. This enhancement was ascribed to the synergistic interactions between MXene and the metal oxides, which reduced recombination losses and promoted effective charge transfer. The study confirms the suitability of PID-based hybrid nanofibers for wastewater treatment applications. It also points toward future directions focused on scalable production and deployment in the field of environmental remediation.
26 October 2021 in Physica Status Solidi (RRL) – Rapid Research Letters