Effective bacterial detection is crucial for health diagnostics, particularly for the detection of pathogenic species like Escherichia coli (E. coli), which is responsible for up to 90% of urinary tract infections (UTIs), is especially crucial. Current detection methods are time-consuming, often delaying diagnosis and treatment. This study introduces an innovative approach for rapid E. coli detection using porous silicon (PSi) substrates combined with Surface Imprinted Polymers (SIPs) for photoluminescence-based (PL-based) E. coli detection. The PSi/SIP substrates offer high sensitivity, selectivity, and a low limit of detection (LOD) without the need for natural recognition elements. These substrates, fabricated via metal-assisted chemical etching (MACE) and PDMS-based E. coli imprinting, demonstrate reliable repeatability and a fast detection. Real-time detection experiments in phosphate-buffered saline (PBS) and urine showed consistent stair-like quenching of the PL signal with increasing E. coli concentrations, achieving theoretical LODs of approximately 13 ± 2 CFU/mL in PBS and 17 ± 3 CFU/mL in urine. The substrates exhibited excellent selectivity, differentiating E. coli from other species such as Cronobacter sakazakii (C. sakazakii) and Listeria monocytogenes. The high sensitivity and reproducibility of PSi/SIP substrates, along with the ease of use and rapid detection capabilities of the resulting sensor, highlight the potential of this novel platform for point-of-care (PoC) applications in clinical diagnostics.
As the demand for clean water continues to rise, the development of reliable and environmentally sustainable purification methods has become increasingly important. In this study, we describe the production and characterization of electrospun polyimide (PID) nanofibers modified with MXene (Ti3C2Tx), tungsten trioxide (WO3), and titanium dioxide (TiO2) nanomaterials for improved photocatalytic degradation of rhodamine 6G (R6G), a model organic dye. Superior photocatalytic performance was achieved by suppressing electron–hole recombination, promoting efficient charge carrier separation, and the significant increase in light absorption through the addition of metal oxide nanowires and MXene to the PID matrix. Comprehensive characterization confirms a core–shell nanofiber architecture with TiO2, WO3, and MXene effectively integrated and electronically coupled, consistent with the observed photocatalytic response. The PID/TiO2/WO3/MXene composite exhibited the highest photocatalytic activity among the tested configurations, degrading R6G by 74% in 90 min of light exposure. This enhancement was ascribed to the synergistic interactions between MXene and the metal oxides, which reduced recombination losses and promoted effective charge transfer. The study confirms the suitability of PID-based hybrid nanofibers for wastewater treatment applications. It also points toward future directions focused on scalable production and deployment in the field of environmental remediation.