Jia Guo

Dr. Jia Guo


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2023 in Molecules
Verified
Journal Article
Open access
PDF file
JGJia Guo
Jia Guo
MZMeixia Zhu
Meixia Zhu
Wenlong MoWenlong Mo
Wenlong Mo
YWYanxiong Wang
Yanxiong Wang
JYJunrong Yuan
Junrong Yuan
NANaeem Akram
Naeem Akram
Easily soluble organic components in Santanghu long flame coal (SLFC) from Hami (Xinjiang, China) were separated by CS2 and acetone mixed solvent (v/v = 1:1) under ultrasonic condition, and the extract residue was stratified by carbon tetrachloride to obtain the light raffinate component (SLFC-L). The effect of solvent treatment on the composition and structure of the coal and its rapid pyrolysis products was analyzed. Solvent treatment can reduce the moisture content in coal from 9.48% to 6.45% and increase the volatile matter from 26.59% to 28.78%, while the macromolecular structure of the coal changed slightly, demonstrating the stability of coal’s complex organic structure. Compared with raw coal, the relative contents of oxygen-containing functional groups and aromatic groups in SLFC-L are higher, and the weight loss rates of both SLFC and SLFC-L reached the maximum at about 450 °C. In contrast, the loss rate of SLFC-L is more obvious, being 33.62% higher than that of SLFC. Pyrolysis products from SLFC at 450 °C by Py-GC/MS are mainly aliphatic hydrocarbons and oxygenated compounds, and the relative contents of aliphatic hydrocarbons decreased from 48.48% to 36.13%, while the contents of oxygenates increased from 39.07% to 44.95%. Overall, the composition and functional group in the coal sample were changed after solvent treatment, resulting in a difference in the composition and distribution of its pyrolysis products.

11 June 2024 in Molecules
Verified
Journal Article
Open access
PDF file
MZMeixia Zhu
Meixia Zhu
YMYaya Ma
Yaya Ma
Wenlong MoWenlong Mo
Wenlong Mo
SHShihao Hao
Shihao Hao
XWXianyong wei
Xianyong wei
JGJia Guo
Jia Guo
With cyclohexane (CH), benzene (BE), and ethyl acetate (EA) as solvents, Naomaohu lignite (NL, a typical oil-rich, low-rank coal) from Hami, Xinjiang, was thermally dissolved (TD) to obtain three types of soluble organics (NLCH, NLBE, and NLEA) and the corresponding insoluble portions (NLCH-R, NLBE-R, and NLEA-R). Ultimate analysis, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG-DTG), and gas chromatography–mass spectrometry (GC/MS) were used to characterize NL and its soluble and insoluble portions. Results showed that, compared with NL, the C element in NLCH-R, NLBE-R, and NLEA-R increased, while the O element decreased significantly, indicating that thermal dissolution is a carbon enrichment process and an effective deoxidation method. The GC/MS results showed that oxygen-containing organic compounds (OCOCs) are dominant in NLCH, NLBE, and NLEA. NLCH is mainly composed of ketones (11.90%) and esters (19.04%), while NLBE and NLEA are composed of alcohols (12.18% and 2.42%, respectively) and esters (66.09% and 84.08%, respectively), with alkyl and aromatic acid esters as the main components. Among them, EA exhibits significant selective destruction for oxygen-containing functional groups in NL. XPS, FTIR, and TG-DTG results showed that thermal dissolution can not only affect the macromolecular network structure of NL, but also improve its pyrolysis reactivity. In short, thermal dissolution can effectively obtain oxygen-containing organic compounds from NL.

12 February 2025 in Molecules
Verified
Journal Article
Open access
PDF file
JGJia Guo
Jia Guo
GZGuihan Zhao
Guihan Zhao
NANaeem Akram
Naeem Akram
YMYaya Ma
Yaya Ma
MZMeixia Zhu
Meixia Zhu
AAAli Ahmad
Ali Ahmad
Soluble organics (SBC-L) from Santanghu bituminous coal (SBC) were obtained by extracting the coal with a mixed solvent of CS2 and acetone (v/v′ = 1:1). Catalytic hydrogenation of SBC-L was carried out using isopropanol as the solvent and prepared bimetallic material (Ni-Mo/γ-Al2O3) as the catalyst, and the hydrogenation product (SBC-LIP320) was obtained. Gas chromatography-mass spectrometry (GC-MS) was used to compare the difference in the composition and distribution of SBC-L and SBC-LIP320; thus, the effect of the used catalyst on the hydrogenation performance and heteroatom removal of SBC-L can be investigated. Results showed that the organic compounds in SBC-L and SBC-LIP320 could be classified into aliphatic hydrocarbons (AHS), arenes, oxygen-containing organic compounds (OCOCs), nitrogen-containing organics (NCOCs), and compounds containing other heteroatoms (OHACOCs). The relative contents of AHS and arenes detected in SBC-LIP320 were higher than those of SBC-L, while the contents of OCOCs, NCOCs, and OHACOCs decreased, and no S-containing compounds could be detected in SBC-LIP320. It can be concluded that the prepared catalyst presents good de-oxygenation, de-sulfurization, de-nitrogenation, and hydrocracking performance.

9 February 2026 in Gels
Verified
Journal Article
Open access
PDF file
ZYZhaojun Yang
Zhaojun Yang
NANaeem Akram
Naeem Akram
LZLei Zhou
Lei Zhou
SKSaman Khawaja
Saman Khawaja
YZYi Zhang
Yi Zhang
JGJia Guo
Jia Guo
This research designed a high-performance superabsorbent gel aligned on the integration of lignite humic residue (LHR) with a polymeric organic network in order to address ecological restoration challenges in the arid mining area in Xinjiang. This water-retaining agent was synthesized by employing solution polymerization techniques using acrylic acid (AA) and acrylamide (AM) as monomers, lignite hydrothermal residue (LHR) as a functional additive, and ammonium persulphate (APS) as the initiator. The resulting lignite hydrothermal residue–polyacrylic gel composite material was obtained by using N,N′-methylene-bisacrylamide (MBA) as the primary crosslinking agent. The water absorption capacity and mechanical strength of the acrylic gel were further enhanced by specifically incorporating low-cost, safe, and non-toxic lignite humic residue (LHR). The performance test indicated that this gel achieved a maximum water absorption of 522 g·g−1 in distilled water and 65.5 g·g−1 in 0.9% sodium chloride solution. Its reusability and water absorption capacity remained above 81.8% even after five cycles of natural dehydration and reabsorption. The method for synthesizing this superabsorbent gel effectively constructs a soil water retention network structure, improving the soil microenvironment, and enhancing plant salt tolerance. The field trial results showed that the application of this LHR-AA-AM superabsorbent gel considerably improved vegetation coverage in mining areas. Hence, this study provides an efficient and economical superabsorbent material for ecological restoration of saline–alkali land in arid regions without soil replacement, demonstrating promising application prospects.

22 August 2025 in Polymers
Verified
Journal Article
Open access
PDF file
LZLiugen Zhang
Liugen Zhang
ZCZhanwen Cao
Zhanwen Cao
ZYZhaojun Yang
Zhaojun Yang
YZYi Zhang
Yi Zhang
JGJia Guo
Jia Guo
Ecological restoration in arid coal-mining regions faces extreme challenges due to soil infertility, salinization, and water scarcity. This study addresses these limitations in the Santanghu Shitoumei No. 1 open-pit mine (Xinjiang), where gypsum gray-brown desert soil, minimal rainfall (199 mm/yr), high evaporation (1716 mm/yr), and persistent gale-force winds exacerbate revegetation efforts. To overcome the high cost, short lifespan, and poor practicality of commercial water-retaining agents, we developed a novel humic acid (HA) and sodium carboxymethyl cellulose (CMC) composite water-absorbing resin (HA-CMC). Optimal synthesis parameters—identified as acrylic acid (AA)–carboxymethyl cellulose (CMC)–humic acid (HA)–Acrylamide (AM)–N,N’-methylene diacrylamide (MBA)–Ammonium persulphate (APS) = 100%:15%:4.5%:25%:0.6%:0.8%—yielded effective crosslinking, confirmed via FTIR and SEM. Performance benchmarking against existing agents demonstrated superior attributes. Field application in the mine’s demonstration area significantly enhanced surface vegetation and soil fertility, confirming the resin’s potential for large-scale soil remediation and ecological restoration in arid mining environments.

28 October 2026 in Polymers
Verified
Journal Article
Open access
PDF file
KLKaigang Li Li
Kaigang Li Li
NANaeem Akram
Naeem Akram
LZLei Zhou
Lei Zhou
ZCZhanwen Cao
Zhanwen Cao
HZHuishan Zhang
Huishan Zhang
JGJia Guo
Jia Guo
To address the poor biodegradability and high environmental risks of traditional synthetic water-retaining agents (WRAs), and the vegetation colonization challenge induced by organic matter deficiency in saline-alkali mining areas, a biodegradable WRA (CCM−CMC) was facilely synthesized from natural cellulose (CCM) and carboxymethyl cellulose (CMC) with epichlorohydrin (ECH) as a crosslinking agent. An in situ non-topsoil replacement remediation system of “superabsorbent polymer–biological fertilizer–native stress-tolerant plants” was established, and its water absorption-retention performance, biosafety, and ecological remediation efficacy were systematically evaluated. CCM−CMC displayed excellent equilibrium swelling ratios (1218, 443, 305, 148 g/g in distilled water, tap water, mining reclaimed water, and 0.9 wt% NaCl solution, respectively), with a 57.28% weight loss after 30-day soil burial, verifying favorable biodegradability. Soil application of CCM−CMC improved soil water-holding capacity by up to 39.20%, and maximally increased pakchoi germination rate, plant height, and dry weight by 23.33%, 327.4%, and 430.8% under drought stress. Field trials in Xinjiang arid mining areas achieved an over 80% survival rate for over ten native stress-tolerant plants, and significantly ameliorated the soil physicochemical properties. These eco-friendly WRAs and derived remediation technology avoid the high costs and ecological disturbance of topsoil replacement, providing a practical technical strategy for the ecological restoration of arid and highly saline-alkali mining areas.