In recent years, wearable devices for monitoring physiological and biomechanical parameters have gained increasing attention, particularly for assessing individuals suffering from back pain. This condition can influence respiratory rate (RR) and heart rate (HR), making their continuous, noninvasive monitoring valuable for back pain mitigation strategies. Fiber Bragg grating (FBG) sensors are well suited for wearable sensing due to their flexibility, multiplexing capability, and biocompatibility, although their fragility remains a limitation. A promising solution involves integrating FBG sensors into 3-D-printed components, a technique that offers cost-effectiveness, ease of fabrication, and high reproducibility. In particular, the fused deposition modeling (FDM) technique enables the fabrication of components using two distinct materials, to combine the specific advantages of each material. Despite the potential of dual-material 3-D printing technology, this approach is still underexplored in the scientific literature. This study presents the design and fabrication of two identical wearable sensors (WSs) based on FBG technology manufactured using FDM. The novelty is to combine the benefits of two materials: thermoplastic polyurethane (TPU), to enhance the sensors’ strain response, and polylactic acid (PLA), to provide greater rigidity in the anchoring region to the human body. This solution allowed optimizing the static and dynamic performance of the sensors. In addition, preliminary tests on healthy subjects highlighted the capability of the proposed systems to monitor cardio-respiratory activity (in particular RR and HR) and flexion-extension movements of the back.
Rotator cuff (RC) injury is a common pathology that involves the tearing and weakening of the muscles and tendons that make up RC. Rehabilitation after surgery is crucial for recovery and restoring range of motion (ROM). Currently, the assessment of a patient’s improvement relies on subjective evaluations by physicians. To objectively evaluate the patient recovery, motion capture systems (MOCAP) can be used in this scenario. However, MOCAP require extremely structured environments and specialists. To overcome this issue, the combined use of flexible sensors with 3D printing techniques has been proposed. This solution will allow developing highly performant wearables with a reduced encumbrance, easy to use, and compliant with the human skin. In this study, we exploited the advantages of fiber Bragg gratings combined with those of 3D printing to propose a transformative approach in the field of wearables for shoulder monitoring. Firstly, the 3D-printed sensor was designed and fabricated using thermoplastic polyurethane as printing filament to make the system flexible. One of the main novelties relies on the direct integration of the anchorage mechanism (two extensible elements) during printing. To the best of our knowledge, this is one of the first works in which this approach is proposed. Then, the sensor was metrologically assessed to investigate its sensitivity to strain and temperature, and the hysteresis error. Finally, a preliminary assessment on a healthy volunteer was proposed to assess the system capability of monitoring shoulder flexion-extension movements with different ROMs and movement rates in the sagittal plane showing promising results.
Rotator cuff injuries are a leading cause of shoulder disability, directly impacting joint mobility and overall quality of life. Effective recovery in these patients depends not only on surgical intervention, when necessary, but also on accurate and continuous monitoring of joint movements during rehabilitation, especially across multiple anatomical planes. Traditional tools, such as clinical assessments or motion capture systems, are often subjective or expensive and impractical for routine use. In this context, wearable devices are emerging as a viable alternative, offering the ability to collect real-time, non-invasive, and repeatable data, both in clinical and home settings. This study presents innovative wearable sensors, developed through 3D printing and integrated with fiber Bragg grating technology, designed to detect the shoulder’s planes of motion (sagittal, scapular, and frontal) during flexion–extension movements. Two wearable sensors made of thermoplastic polyurethane (TPU 85A and 95A) were fabricated and subjected to metrological characterization, including strain and temperature sensitivity, hysteresis error, and tear resistance, and tested on eight healthy volunteers. The results demonstrated high discriminative ability, with sensitivity values up to 0.76 nm/mε and low hysteresis errors. The proposed system represents a promising, cost-effective, and customizable solution for motion monitoring during shoulder rehabilitation.