Wireless power transfer (WPT) is a power transfer technique widely used in many industrial applications, medical applications, and electric vehicles (EVs). This paper deals with the dynamic modeling of the resonant inverter employed in the WPT systems for EVs. To this end, the Generalized State-Space Averaging and the Laplace Phasor Transform techniques have been the flagship methods employed so far. In this paper, the modeling of the resonant inverter is accomplished by using the novel Modulated Variable Laplace Transform (MVLT) method. Firstly, the MVLT technique is discussed in detail, and then it is applied to model a study-case resonant inverter. Finally, a study-case resonant inverter is developed and utilized to validate the theoretical results with MATLAB/Simulink.

The electricity demand of the world is growing at a rapid pace. On the other hand, pollution levels due to conventional power generating techniques are drastically increasing and resulting in harmful environmental issues and impacts. As an alternative to this, renewable or clean energy generation from solar photovoltaic’s (PV) in large scale grid connected systems is being increasingly encouraged at the present time. One of the emerging trends in solar PV module power generation is building integrated photovoltaic (BIPV) systems. It meets the local load demands of the building or residential systems and can be used as a stand-alone or on-grid connected system. This paper briefs about the development and recent trends related to renewable energy generation from BIPV systems and its maximum power generation techniques. It also describes both the current-voltage (I-V) and power-voltage (P-V) characteristics of various BIPV products at dissimilar values of solar irradiation. With BIPV, the building or residential components like the roof, an outer wall, window glass, etc., are replaced by PV array module and hence a dual purpose is served with a reduction in the overall cost.

Prevalent converters for induction heating (IH) applications employ two-stage conversion for generating high-frequency magnetic field, namely, AC to DC and then DC to high-frequency AC (HFAC). This research embarks upon a direct conversion of utility AC to high frequency AC with the design of a single-phase matrix converter (SPMC) as a resonant converter using a modified switching technique for IH application. The efficacy of the proposed approach is validated through different attributes such as unity power factor, sinusoidal input current and low total harmonic distortion (THD). The developed prototype-embedded system has high pragmatic deployment potential owing to its cost effectiveness using Arduino mega 2560 and high voltage/current as well as low switching time IXRH40N120 insulated-gate bipolar transistor (IGBT). Different results of the prototype-embedded system for IH application have been verified using Matlab Simulink environment to corroborate its efficacy.

In this work, full bridge parallel resonant inverter (FBPRI) using pulse density modulation (PDM) technique has been proposed for industrial induction heating application like brazing, welding, melting of iron etc. There are so many techniques that have been developed for FBPRI to control the output power in IH application. But none of them are able to maintain resonating and ZVS/ZCS condition under a different operating condition which is a key feature of resonant converters. Due to this, efficiency and performance of IH system are degraded. Keeping this disadvantage, a pulse density modulation (PDM) technique has been proposed in this work for FBPRI to achieve better efficiency and performance of the classical IH system. This proposed technique ensures the ZVS/ZCS condition which reduces the switching losses. The proposed control method/technique is described in detail and it is validated through PSIM simulation at a frequency of 47 KHz.

This paper proposes a single-stage direct AC to high-frequency (HF) AC resonant converter based on LLC configuration for induction heating (IH) systems or HF applications. Unlike conventional converters for IH systems, the proposed topology converts the utility frequency to HF AC in a single stage without using a DC link inductor and capacitors and takes the advantages of LLC configuration. Additionally, it improves the power factor to 0.9–1, lowers the THD (3.2% experimentally), and protects against the high-frequency components. An embedded control scheme was designed to keep the HF current oscillating at a resonant frequency, ensuring zero-voltage switching. The operating principle of the proposed topology was investigated using mathematical equations and equivalent circuits. Finally, it was verified using computer simulation, and an experimental prototype of 1.1 kW was developed to demonstrate the proposed topology’s uniqueness.