Eric S. Li

Dr. Eric S. Li


Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 November 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
CYChia-An Yu
Chia-An Yu
ELEric S. Li
Eric S. Li
HJHuayan Jin
Huayan Jin
YCYue Cao
Yue Cao
GSGuan-Ren Su
Guan-Ren Su
KCKuo-Sheng Chin
Kuo-Sheng Chin
In this paper, two 24 GHz horizontally polarized 1 × 8 patch antenna arrays were developed for automotive radar applications. The proposed antenna arrays offer the advantages of wide fan beams and high gain. The far-field radiation patterns are widened in the E-plane by disturbing the near-field distribution of each driven patch. In Design I, the driven patch is loaded with a parasitic loop, which functions as a director in the E-plane. Due to the directing effect, the E-plane beamwidth can be increased. The experimental verification prepared for Design I showed that a beamwidth of 130° and a gain of 12.2 dBi can be achieved through this method. To further enhance the beamwidth, another array with each patch loaded with parasitic mushroom-like elements was proposed by Design II. The PMLEs are 180° out of phase to their corresponding driven patch. The cancelation effects can be properly managed to slightly sacrifice the gain of the array in return for a wider beamwidth in the E-plane. Design II exhibits a wider beamwidth of 150° and a lower gain of 11.1 dBi.

4 November 2020 in IEEE Access
Verified
Journal Article
Open access
GSGuan-Ren Su
Guan-Ren Su
ELEric S. Li
Eric S. Li
TKTing-Wei Kuo
Ting-Wei Kuo
HJHuayan Jin
Huayan Jin
YCYi-Chyun Chiang
Yi-Chyun Chiang
KCKuo-Sheng Chin
Kuo-Sheng Chin
A wide-beam microstrip patch antenna and antenna array ranging from 77 to 81 GHz are presented in this study for millimeter-wave applications. A substrate-integrated-waveguide probe-fed patch was developed. For beamwidth enhancement, two I-shaped parasitic elements were placed next to the main patch to establish a three-element subarray. The current directions of the parasitic elements were opposite to that of the main patch, leading to beamwidth enhancement in the E-plane radiation pattern. The proposed I-shaped parasitic element has the advantages of coplanar structure, compact size, and easy adjustment of the induced current. An array-factor method was employed to analyze the effect of the parasitic elements on the beamwidth of the main patch. Three amplitude distributions of the subarray were compared. The distribution of –0.1:1:–0.1 was proved to present the most beamwidth, which can be realized easily by the proposed I-shaped parasitic elements. To achieve both wide beamwidth and high gain, a 1 × 8 patch antenna array with the I-shaped parasitic elements was proposed. The measured results showed that the design can offer a gain of 10.74 dBi and a wide beamwidth of 138° at 79 GHz.

30 August 2024 in IEEE Access
Verified
Journal Article
Open access
CCCheng-Fang Cao
Cheng-Fang Cao
ELEric S. Li
Eric S. Li
HJHuayan Jin
Huayan Jin
DCDongxu Chen
Dongxu Chen
KCKuo-Sheng Chin
Kuo-Sheng Chin
This work developed two cavity-backed slot antennas based on substrate integrated waveguide (SIW) technology. The designs offer the advantages of single-layer structure, dual-band operations, circular polarization, and filtering performance. Antenna I features a perturbed aperture on an SIW cavity and four cross slots distributed near its corners to excite seven resonant modes. Among them, two sets of orthogonal modes, namely TE120/TE210 and TE230/TE320, are used to create the first (3.7 GHz) and the second (5.6 GHz) operating bands, respectively, and to establish dual-band circularly-polarized properties for 5G NR n46 and n78 applications. The remaining three modes, TE110, TE220, and TE330, serve to generate radiation nulls to increase stopband rejection. Measured results indicated a peak gain value up to 7.1 dBic. The rejection levels at the lower, middle, and upper stopbands were 23, 10, and 17 dB, respectively. Antenna II further improves the rejection level at the middle stopband by introducing three complementary split-ring resonators (CSRRs) to the SIW feed line. It allows a broader stopband between the two passbands and enhances the corresponding rejection level. The middle CSRR is etched on the top of the SIW, whereas the other two CSRRs are on the bottom to avoid undesired resonance and to improve the rejection level effectively. The measured realized gain was as high as 7.78 dBic with excellent filtering characteristics. The rejection levels of 24, 24, and 20 dB were observed at the lower, middle, and upper stopbands, respectively.

8 March 2018 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
ELEric S. Li
Eric S. Li
CKChen‐Jer Kang
Chen‐Jer Kang
This study is presented to explore the properties of multisection transdirectional coupled‐line couplers (TRD CLCs) developed for bandwidth enhancement. Unlike conventional multisection contradirectional coupled‐line couplers (CTD CLCs) comprising only CTD CLCs, the proposed multisection TRD CLCs may require the combination of transdirectional and CTD CLCs for some higher‐order designs. The designs feature a central TRD CLC. A symmetrical structure with respect to the central coupler is proposed to meet the port assignments of transdirectional couplers with broadband performance on the magnitude difference as well as the phase difference of 90° between two output ports. It can offer multiple solutions for some multisection designs. Practical examples are presented for 3 dB multisection TRD CLCs with optimum coupling coefficients assigned to individual couplers to achieve maximum bandwidth. Periodic structures are used to implement coupled‐line couplers. Simulation results indicate that the proposed multisection designs meet the required port assignments and offer wider bandwidth compared to a single design of the same coupling. The simulation results of the three‐section design are verified experimentally and good agreement is observed.

1 October 2019
Verified
Conference Paper
Closed access
JGJianhui Guo
Jianhui Guo
SWSai-Wai Wong
Sai-Wai Wong
LZLong Zhang
Long Zhang
LZLei Zhu
Lei Zhu
YHYejun He
Yejun He
ELEric S. Li
Eric S. Li
In this paper, a miniaturized UHF band second-order quasi-elliptic response bandpass filter (BPF) is proposed. Traditional UHF transmission line filter suffers from large circuit size and large footprint area. For the purpose of miniaturization, spiral quarter-wavelength short-circuited resonators is used in this BPF filter design. For further footprint reduction, the proposed filter is implemented by stacking multilayer substrates. Coplanar waveguide (CPW) transmission lines are used as input and output ports on the same layer, which can be compatible with surface mounting technology (SMT) effectively. It is observed from simulation and measured results that the return loss and insertion loss at a center frequency of 433 MHz are about 15 dB and 0.7 dB, respectively, with a fractional bandwidth of 19%. Two transmission zeros are located on both sides of the passband. A good agreement is obtained between the simulated and measured results.

1 January 2025 in IEEE Access
Verified
Journal Article
Open access
TKTing-Wei Kuo
Ting-Wei Kuo
YCYu-Liang Zhu Chen
Yu-Liang Zhu Chen
ELEric S. Li
Eric S. Li
HJHuayan Jin
Huayan Jin
DCDongxu Chen
Dongxu Chen
KCKuo-Sheng Chin
Kuo-Sheng Chin