With the advantages of a high power-to-weight ratio and oil-free bearings, a magnetically suspension centrifugal compressor (MSCC) equipped with active magnetic bearings operates more efficiently than the traditional mechanical compressors over a wide speed range by precisely controlling a high-speed permanent-magnet synchronous motor (PMSM). However, owing to the harsh working environment, the motor parameters, including the resistor, inductance, and flux linkage, vary significantly. This degrades the rotor position observer performance, which is crucial for controlling a high-speed PMSM. Hence, this article proposes an improved sensorless control method combined with novel motor parameter identification. First, an improved position sliding mode observer using a novel supertwisting algorithm is designed to achieve higher precision and better transient performance. Second, the influence of parameter mismatch is analyzed. To overcome the problems of rank deficiency and system matrix uncertainties, a novel identification strategy based on recursive total least-squares excitatory and inhibitory learning is developed to identify inductance and resistance in two-time scales. Meanwhile, the back electromotive force in static coordinates is employed to estimate the flux linkage. Third, the results are adopted to update the control parameters immediately. Finally, the proposed method is tested on an MSCC prototype experimental platform, and the results verify its validity and feasibility.
9 June 2025 in IEEE Transactions on Power Electronics
Conventional loss minimization control (LMC) strategies can reduce electrical losses of high-speed surface-mounted permanent magnet synchronous motors (SPMSMs) by regulating the d-axis current to its optimal value. However, their performance is limited by the accuracy of the optimal current calculated based on fixed model parameters. Considering that some model parameters are prone to change during the operation of high-speed SPMSMs, this article proposes an improved LMC strategy based on online parameter estimation. First, the impact of model parameter variations on electrical losses and optimal current is analyzed. Second, lookup tables for stator resistance and synchronous inductance, along with a super-twisting sliding mode observer, are designed for the estimation of dq-axis magnetizing currents, which are used to estimate the iron loss resistance. Subsequently, addressing the issue of increased system complexity due to the introduction of electromagnetic torque in traditional LMC strategies, this article directly adopts the optimal magnetizing current as the reference and designs an improved LMC strategy using the observed magnetizing current as feedback. Finally, the effectiveness of the proposed method is validated through experiments on a high-speed magnetic levitation air spinning machine, demonstrating significant reduction in electrical losses and improved efficiency.
28 July 2025 in Journal of Electrical Engineering & Technology
The permanent magnetic synchronous motor (PMSM) is of significant use for the centrifugal hydrogen compressor (CHC) in the hydrogen fuel cell system. In order to satisfy the demand for improving the CHC’s performance, including higher accuracy, higher response speed, and wider speed range, this paper proposes a novel adaptive super-twisting sliding mode observer (ASTSMO)-based position sensorless control strategy for the highspeed PMSM. Firstly, the super-twisting algorithm (STA) is introduced to the sliding mode observer (SMO) to reduce chattering and improve the accuracy of position estimation. Secondly, to increase the convergence speed, the ASTSMO is extended with a linear correction term, where an extra proportionality coefficient is used to adjust the stator current error under dynamic operation. Finally, a novel adaptive law is designed to solve the PMSM’s problems of wide speed change, wide current variation, and inevitable parameters fluctuation, which are caused by the CHC’s complex working environment like frequent load changes and significant temperature variations. In the experimental verification, the position accuracy and dynamic performance of the PMSM are both improved. It is also proved that the proposed strategy can guarantee the stable operation and fast response of the CHC, so as to maintain the reliability and the hydrogen utilization of the hydrogen fuel cell system.