Ground-penetrating radar (GPR) is a nondestructive testing technology that has been used for years to determine pavement layer thicknesses. More recently, several studies have shown that GPR can also be used to evaluate the in-place density of the pavement (i.e., density profiling system) as well as the uniformity of the compaction operations. However, the potential effect of the thickness of the evaluated layer and the type of material located underneath on GPR-measured dielectric constants is still under investigation. As part of the National Pooled Fund study TPF-5(443) sponsorship, the National Center for Asphalt Technology (NCAT) evaluated the effect of thickness in the laboratory using 60 cm by 60 cm compacted slabs and evaluated the effect of the base material by placing and testing such slabs on two different asphalt pavements, one concrete pavement, and steel plates. Steel was used to have significant contrast from typical pavement materials. This evaluation also included field testing on several pavement sections built in 2021 as part of the NCAT Test Track new testing cycle. The results of this study indicated that dielectric constants of thin layers (50 mm) may be affected by the base materials with significantly different dielectric constants compared to asphalt pavement. In addition, field evaluation of thinner layers (25 mm or less) indicated that measured dielectric constants can be highly affected by the type of base material, the density of these layers, and presence of water. A potential negative effect is the increase in variability and probability of obtaining fewer results within specified limits.
20 February 2025 in International Journal of Pavement Research and Technology
Thin asphalt overlays are a popular preservation treatment for asphalt and composite pavements due to their ability to address multiple pavement distresses. Their efficiency depends on several components such as traffic, climate, and the pavement condition at the time the treatment is applied. Nevertheless, typical life expectancy for thin overlays ranges between 7 and 12 years. Significant traffic volumes experienced on highway tend to accelerate pavement deterioration. Therefore, this study aimed to evaluate the field performance of thin asphalt overlays through several surface indicators such as rutting, cracking, and roughness. Data from the Pavement Preservation Group Study, a broader research study conducted by the National Center for Asphalt Technology and the Minnesota Department of Transportation’s Road Research Facility was utilized. Specifically, control sections (untreated) and thin overlays placed on highway pavements at two different geographic locations, with distinctive climatic conditions, were studied. A k-means cluster and principal component analysis were performed to group sections with similar performance since various thin overlay configurations and combinations with alternative pavement preservation treatments have arisen. The findings revealed that thin overlays as preservation treatments contribute to maximizing pavement service life, maintaining roughness in good condition (International Roughness Index, IRI below 1.5 m/km even after 6 years), and decreasing its progression by up to 84% compared to untreated sections. These benefits were dependent on the respective pre-treatment condition and treatment configuration. Additionally, climatic conditions in each specific region play a crucial role in determining treatment performance.
This study evaluated the benefits of pavement preservation treatments across two climatic zones using data from the National Center for Asphalt Technology (NCAT) Pavement Preservation Group Study. Longitudinal data analysis was conducted to quantify pavement performance over time. Results indicate that in the freeze zone, treatments significantly improved pavement smoothness, as evidenced by reductions in the progression of the International Roughness Index (IRI), whereas similar trends were not observed in the no-freeze region, highlighting the need for further research to quantify the benefits in these zones. Life cycle cost analysis (LCCA) showed that selected preservation treatments reduced user costs by 54–57% due to lower excess fuel consumption, particularly in high-traffic corridors. These treatments also contributed to reductions in greenhouse gas (GHG) emissions by decreasing fuel use. Despite these findings, comprehensive, high-quality data are needed to fully evaluate the economic and environmental benefits of preservation treatments at the project level and to improve decision-making in pavement management strategies.