Fabricio Leiva

Dr. Fabricio Leiva

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 October 2017 in Road Materials and Pavement Design
Verified
Journal Article
Closed access
FLFabricio Leiva
Fabricio Leiva
AVAdriana Vargas-Nordcbeck
Adriana Vargas-Nordcbeck
There is a growing need to improve the performance properties of asphalt binders in order to minimise the occurrence of failure mechanisms such as permanent deformation, fatigue, adhesiveness and moisture damage. Nano-structured materials have taken a scientific-industrial boom as asphalt modifiers due to their mechanical, thermal and electrical properties, among others. The chemistry of the nano-material, and thus their inherent physical properties, ends up with each one having specific effects on the asphalt and variable blending forms depending on their nature. This paper evaluates the effect of the incorporation of nano-silica (nano-SiO2) into a PG64-22 binder at various contents from 0.5% to 6.0%. Nano-SiO2 is widely used in the painting industry to improve adhesion of the paint to walls and provides an impermeable coat. Morphological, rheological and thermal analysis techniques were used to quantify the effect of asphalt binder modification. Such techniques were differential scanning calorimetry, thermogravimetric analysis, as well as Fourier transform infrared spectroscopy and atomic force microscopy. Selection of the optimum modifier content was mainly based on dynamic shear rheometry asphalt fatigue and rutting tests and work of adhesion analysis.

1 July 2017 in International Journal of Pavement Research and Technology
Verified
Journal Article
Open access
FLFabricio Leiva
Fabricio Leiva
AVAdriana Vargas-Nordcbeck
Adriana Vargas-Nordcbeck
JAJosé Pablo Aguiar-Moya
José Pablo Aguiar-Moya

18 December 2024 in Construction Materials
Verified
Journal Article
Open access
PDF file
FLFabricio Leiva
Fabricio Leiva
ACAlvaro Antonio Cerdas-Murillo
Alvaro Antonio Cerdas-Murillo
This study presents the results of using innovative and sustainable recycled fibers in different asphalt mixtures. Laboratory design and performance evaluation were focused on the cracking and rutting resistance of asphalt mixtures reinforced with recycled fibers. Two mixtures were designed for this research: 1. A dense-graded hot-mix asphalt (HMA) mixture containing 15% reclaimed asphalt pavement (RAP) and a PG 64-22 asphalt binder. 2. A cold-recycled mixture (CRM) incorporating silica fume and Portland cement as a mineral filler and CSS-1H asphalt emulsion. The recycled fibers used in this study included PET, LDPE, and carbon and rubber fibers. A balanced mix design (BMD) approach based on cracking and rutting performance parameters was used to design the control mixtures. The IDEAL-CT (ASTM D8225) was conducted to assess the cracking resistance, and the IDEAL-RT (ASTM D8360) was applied for rutting resistance. For the HMA mixture, results showed that the addition of PET, carbon, and rubber fibers enhanced cracking resistance and influenced the rutting resistance; ANOVA analyses revealed statistically significant differences in both CT index and RT index between the control mixture and the fiber-reinforced mixtures. In the case of the cold-recycled mixtures, the addition of LDPE, PET, and rubber improved cracking resistance; however, a decrease in rutting resistance was also observed among the evaluated CRM samples.

22 June 2024 in NDT
Verified
Journal Article
Open access
PDF file
FLFabricio Leiva
Fabricio Leiva
AVAdriana Vargas-Nordcbeck
Adriana Vargas-Nordcbeck
The work conducted in this study was designed to establish achievable testing tolerances for non-destructive pavement density measurements using Density Profiling Systems (DPSs). Nine and six sensors were used to determine the precision of repeatability and reproducibility in the laboratory and the field, respectively. A minimum of six sensors (considered in this study as independent laboratories) were needed to comply with the minimum number of participants required in the current ASTM standard practice (ASTM E691). The methodology included the development of laboratory precision evaluation with a total of nine sensors and two different mixtures (9.5 mm fine-graded mix, 19.0 mm coarse-graded mix) compacted at four density levels (97%, 94%, 91%, and 88% of Gmm). For the field portion of this study, pavement sections built at the National Center for Asphalt Technology (NCAT) Test Track in 2021 served as experimental variables. These sections were built with fine-graded asphalt mixtures and open-graded mixes as wearing courses. Additionally, the pavement sections included three underlying materials: new asphalt (binder layer), milled asphalt surface, and granular base, with thicknesses ranging from 3.8 to 13.9 cm. Density profile testing was conducted at two locations: within the mat (center of the lane) and along the joint. Computed precision statements regarding dielectric values within and between laboratories were about double for field results compared to laboratory results. However, when converted to density, the statements were significantly below the reported statements for Bulk Specific Gravity and Vacuum Sealing in the laboratory and Nuclear and Electromagnetic density gauges in the field.

18 October 2022 in Journal of Testing and Evaluation
Verified
Journal Article
Closed access
FLFabricio Leiva
Fabricio Leiva
SGSurendra Gatiganti
Surendra Gatiganti
ACAnthony Brenes Calderon
Anthony Brenes Calderon
Ground-penetrating radar (GPR) is a nondestructive testing technology that has been used for years to determine pavement layer thicknesses. More recently, several studies have shown that GPR can also be used to evaluate the in-place density of the pavement (i.e., density profiling system) as well as the uniformity of the compaction operations. However, the potential effect of the thickness of the evaluated layer and the type of material located underneath on GPR-measured dielectric constants is still under investigation. As part of the National Pooled Fund study TPF-5(443) sponsorship, the National Center for Asphalt Technology (NCAT) evaluated the effect of thickness in the laboratory using 60 cm by 60 cm compacted slabs and evaluated the effect of the base material by placing and testing such slabs on two different asphalt pavements, one concrete pavement, and steel plates. Steel was used to have significant contrast from typical pavement materials. This evaluation also included field testing on several pavement sections built in 2021 as part of the NCAT Test Track new testing cycle. The results of this study indicated that dielectric constants of thin layers (50 mm) may be affected by the base materials with significantly different dielectric constants compared to asphalt pavement. In addition, field evaluation of thinner layers (25 mm or less) indicated that measured dielectric constants can be highly affected by the type of base material, the density of these layers, and presence of water. A potential negative effect is the increase in variability and probability of obtaining fewer results within specified limits.

1 April 2019
Verified
Open access
PDF file
FLFabricio Leiva
Fabricio Leiva
AVAdriana Vargas-Nordcbeck
Adriana Vargas-Nordcbeck
Several dynamic modulus (E*) predictive models of asphalt mixtures have been developed as an alternative to laboratory testing. The 1999 I-37A Witczak equation is one of the most commonly used alternatives. This equation is based on mixtures laboratory results in the U.S. In Latin American countries there are significant differences in material properties, traffic information, and environmental conditions compared to the U.S.; therefore, there is a limitation is the use of this equation using local conditions. The National Laboratory of Materials and Structural Models at the University of Costa Rica (Lanamme UCR) has previously performed a local calibration of this equation based on results from different types of Costa Rican mixtures. However, there was still room for improvement using advanced regression techniques such as neural networks (NN). The objective of this study was to develop an improved and more effective dynamic modulus regression model for mixtures in Costa Rica using Neural Networks. Results indicated that the new and improved model based on neural networks (E* NN-model) not only met the model adequacy checking criteria but also exhibited the best goodness of fit parameters and the lowest overall bias.