Unmanned aerial vehicles (UAVs) are increasingly used in urban management and public services, but their potential misuse poses serious risks to public safety. Electrostatic sensors offer a promising approach for UAV detection and interception by capturing their electrostatic signatures during dynamic encounters. However, the sensor output is affected by the coupling between encounter parameters and circuit characteristics, making accurate modeling challenging. This study proposes an analytical modeling method for electrically floating electrostatic sensor signals, calibrated under actual boundary conditions. The model incorporates the effects of encounter angle, miss distance, relative velocity, and equivalent input resistance-capacitance parameters, enabling efficient prediction of sensor signals under multivariable coupling. To validate the model, the electrostatic signatures during dynamic encounters were obtained using the airborne data acquisition and storage system. Results show that the predicted signals correlate well with measured data, with a correlation coefficient above 0.9. The proposed model demonstrates high computational efficiency and supports the design and optimization of electrostatic sensing systems for low-altitude UAV detection and interception.
Traditional noise reduction methods often struggle to balance noise suppression with the preservation of transient features in acceleration signals, especially when dealing with high-speed transient data. This study proposes a novel noise reduction method combining ensemble empirical mode decomposition (EEMD), sample entropy (SE), and improved wavelet threshold denoising (IWTD) to address the issue. The method utilizes EEMD to decompose the signal into intrinsic mode functions (IMFs) and a residual term. By setting an SE threshold (SE = 0.3), it effectively differentiates noise-dominated components from those containing significant transient features. IWTD is then applied to the noise-dominated components, and the processed components are reconstructed to yield the denoised signal. A baseline signal is generated in the lab, and noise is added to create the test set. The results show that this method achieves optimal noise reduction performance. Its effectiveness is validated through the output signal-to-noise ratio, root mean square error, and correlation coefficient. Overall, this method enhances noise reduction performance while preserving transient features. The method has been validated using real multi-layer penetration acceleration signals, supporting subsequent penetration layer identification and inversion analysis of the penetration process.
To address the damage and failure of electromechanical structures such as Printed Circuit Board (PCB) modules and battery assemblies under multiple impacts, this study combined experimental and modeling approaches to quantitatively investigate the influence of target material mechanical properties on impact acceleration characteristics. Quasi-static tensile/compression tests, split-Hopkinson pressure bar dynamic compression tests, and sequential multiple-target impact experiments were conducted on nine metallic materials, providing constitutive parameters and impact response data. Variance analysis revealed that material type significantly affected acceleration characteristics (p ≤ 1.62 × 10−5), whereas the target position in the impact sequence was statistically insignificant (p ≥ 0.89). Quantitative prediction models were established for different acceleration characteristics: Ridge regression (α = 0.1) was employed for Peak 1–Peak 3, Duration 1, and Duration 3, while linear regression was used for Duration 2. The results quantitatively demonstrated that the elastic modulus was positively associated with both peak acceleration and duration, while dynamic compressive yield strength exhibited a significant negative influence. This work establishes a preliminary quantitative predictive framework that provides guidance for target material selection in sequential multiple-target impact experiments and offers an experimental approach for generating tunable overload responses in high-intensity impact testing of electromechanical components.
In impact testing, evaluating multiple-impact signals is critical for verifying whether a test setup can reproduce penetration response signals and ensure reliable results. To overcome the limitations of traditional methods, including incomplete indicator coverage, subjective weighting, and poor consistency, this study proposes a fuzzy comprehensive evaluation (FCE) framework based on time–frequency features and combined weighting. Using multi-layer penetration response signals as the matching target, a multidimensional indicator system covering time-domain features, frequency-domain features, and signal quality and stability is established. A combined weighting method integrating AHP, EWM, and CRITIC is then developed, and subjective and objective weights are fused using the geometric mean method. A fuzzy comprehensive evaluation model is used to quantify the matching degrees of multiple sets of multiple-impact signals, and robustness is verified through weight consistency tests and sensitivity analysis. The results show that the evaluated signal sets are rated “Excellent”. Under reasonable weight combinations, the probability of obtaining an “Excellent” result reaches 99.94%, and the maximum variation caused by a ±10% perturbation in a single indicator weight is only 0.0087. The proposed framework provides a practical tool for evaluating multi-layer penetration response simulations and can be extended to other complex dynamic signal-matching problems.
The dynamic behaviour of the impact system directly affects its impact effect, reliability, and bearing capacity. Modelling and simulating the impact system is an important way to verify the feasibility of the design scheme and guide the optimization of the structure. To solve the problem of modelling the dynamics of an impact system, a multi-energy domain coupling modelling method based on bonding diagram theory was proposed. The equation of state of the system was established and solved using the fourth-order Runge-Kutta method. The results showed that: 1) Most of the energy dissipated during impact was concentrated at the collision interface; 2) The displacement of the impacted body was only 0.012 mm, verifying the effectiveness of the support; 3) The velocity of the rotor-bearing system after being disturbed by impact exhibited characteristics of double trough attenuation oscillation. This provides an effective theoretical tool for the dynamic analysis and reliability design of high-impact systems.