Yue Zhang

Dr. Yue Zhang


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 June 2024 in Materials
Verified
Journal Article
Open access
PDF file
XLXianke Lu
Xianke Lu
Yuyuan ZhaoYuyuan Zhao
Yuyuan Zhao
YZYue Zhang
Yue Zhang
MWMian Wu
Mian Wu
The velocity field and temperature field are crucial for metal foams to be used as a heat exchanger, but they are difficult to obtain through physical experiments. In this work, the fluid flow behavior and heat transfer performance in open-cell metal foam were numerically studied. Porous 3D models with different porosities (55–75%) and pore sizes (250 μm, 550 μm, and 1000 μm) were created based on the porous structure manufactured by the Lost Carbonate Sintering method. A wide flow velocity range from 0.0001 m/s to 0.3 m/s, covering both laminar and turbulent flow regimes, is fully studied for the first time. Pressure drop, heat transfer coefficient, permeability, form drag coefficient, temperature and velocity distributions were calculated. The calculated results agree well with our previous experimental results, indicating that the model works well. The results showed that pressure drop increased with decreasing porosity and increasing pore size. Permeability increased and the form drag coefficient decreased with increasing porosity, and both increased with increasing pore size. The heat transfer coefficient increased with increasing velocity and porosity, whereas it slightly decreased with increasing pore size. The results also showed that at high velocity, only the metal foam close to the heat source contributes to heat dissipation.

21 October 2025 in Materials
Verified
Journal Article
Open access
PDF file
CSChen Shen
Chen Shen
YZYue Zhang
Yue Zhang
JLJianlin Li
Jianlin Li
HZHaonan Zeng
Haonan Zeng
CYChanghui Yang
Changhui Yang
LINWEN YULINWEN YU
LINWEN YU
Ultra-high-performance concrete (UHPC) exhibits exceptional mechanical properties and durability but faces challenges such as high heat of hydration and limited stiffness. Incorporation of coarse aggregates offers a potential solution; however, it alters the dispersion of steel fibers, thereby affecting the mechanical performance of UHPC under different loading conditions. This study systematically investigates the influence of coarse aggregates on UHPC performance under different loading conditions, including four-point bending, uniaxial compression, and triaxial compression tests. The spatial distribution of steel fibers was quantitatively analyzed via image analysis to elucidate changes induced by CA incorporation. Results reveal that with 20 vol% coarse aggregate (10 mm), UHPC’s flexural strength is essentially unchanged (≈23 MPa), whereas flexural toughness decreases by about one-third. This toughness loss is linked to a slight increase in the fiber orientation angle (from 48.77° to 48.90°) and reduced continuity, which together weaken crack-bridging. Moreover, both flexural strength and toughness are governed primarily by the local steel-fiber content within the tensile zone. Under triaxial compression, confinement dominates: as confining pressure rises from 0 to 30 MPa, compressive strength increases by approximately 32.6%, 52.6%, and 71.3%. Due to crack-suppression by confinement overlapping with fiber bridging, the contribution of fibers to strength gains decreases with increasing confinement, and the competing and complementary interaction between coarse aggregate and steel fibers correspondingly weakens. These findings clarify the coupled effects of coarse aggregate and fibers in UHPC-CA, guide mix-design optimization for improved mechanical performance, and support broader practical adoption.

22 December 2025 in Materials
Verified
Journal Article
Open access
PDF file
Ruizhe SiRuizhe Si
Ruizhe Si
XHXiangyu Han
Xiangyu Han
YZYue Zhang
Yue Zhang
HZHaonan Zeng
Haonan Zeng
This study investigates the effect of added sodium sulfate on the performance of high-volume slag-cement mortar (HVSCM). Herein, Na2SO4 (0, 1, 2, and 4 wt.% Na2O) was used to modify HVSCM. The compressive strength, fracture properties, microstructure, and environmental impact of the synthesized samples were analyzed. The results showed that the 1 day compressive strength of HVSCM can be improved by 345.5% with the addition of 4% Na2O (as Na2SO4), compared to samples without Na2SO4. However, the 28 day compressive strength of Na2SO4-activated HVSCM was 14.3–26.4% lower than that of the non-activated HVSCM, though still comparable to OPC. Regarding fracture properties, the initial fracture toughness of non-activated HVSCM was 45.6% higher than that of Ordinary Portland cement (OPC) mortar. Furthermore, Na2SO4 activation further increased initial fracture toughness, with the sample containing 4% Na2O showing a 101.1% improvement over OPC. In contrast, fracture energy was not significantly influenced by Na2SO4 addition. Microstructurally, the enhanced fracture properties of non-activated HVSCM were attributed to a higher degree of C-(A)-S-H polymerization and a denser binder phase. Sodium sulfate introduced sodium ions to strengthen electrostatic attraction and cohesion between C-(A)-S-H globules, offsetting reduced polymerization. Environmental assessment confirms that both activated and non-activated HVSCM substantially reduce embodied energy and CO2 relative to OPC, while the additional embodied energy associated with Na2SO4 activation remains limited (<12%). Overall, this work provides a comprehensive understanding of the fracture behavior of Na2SO4-activated HVSCM, elucidating its capacity to enhance early-age strength and fracture toughness while highlighting its limited effect on long-term strength and fracture energy. These findings support the tailored use of Na2SO4 activation for sustainable construction applications.