John Dudgeon

Prof. John Dudgeon


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 December 2021 in Processes
Verified
Journal Article
Open access
PDF file
Chikashi SatoChikashi Sato
Chikashi Sato
NPN. Evelin Paucar
N. Evelin Paucar
SCSteve Chiu
Steve Chiu
MMMuhammad Zunnun Ibna Mostafa Mahmud
Muhammad Zunnun Ibna Mostafa Mahmud
JDJohn Dudgeon
John Dudgeon
In this study, three single-chamber microbial fuel cells (MFCs), each having Pt-coated carbon cloth as a cathode and four bamboo charcoal (BC) plates as an anode, were run in a fed-batch mode, individually and in series. Simulated potato-processing wastewater was used as a substrate for supporting the growth of a mixed bacterial culture. The maximum power output increased from 0.386 mW with one MFC to 1.047 mW with three MFCs connected in series. The maximum power density, however, decreased from 576 mW/m2 (normalized to the cathode area) with one MFC to 520 mW/m2 with three MFCs in series. The experimental results showed that power can be increased by connecting the MFCs in series; however, choosing low resistance BC is crucial for increasing power density.

19 September 2023 in Membranes
Verified
Journal Article
Open access
PDF file
Chikashi SatoChikashi Sato
Chikashi Sato
Wilgince ApollonWilgince Apollon
Wilgince Apollon
Alejandro Isabel Luna MaldonadoAlejandro Isabel Luna Maldonado
Alejandro Isabel Luna Maldonado
NPN. Evelin Paucar
N. Evelin Paucar
MHMonte Hibbert
Monte Hibbert
JDJohn Dudgeon
John Dudgeon
In this study, a microbial fuel cell was integrated into a hydroponic system (MFC-Hyp) using a ceramic membrane as a separator. The MFC-Hyp is a passive system that allows the transport of nutrients from wastewater in the microbial fuel cell (MFC) to water in the hydroponic vessel (Hyp) through a ceramic membrane separator, with no external energy input. The performance of this system was examined using potato-process wastewater as a source of energy and nutrients (K, P, N) and garlic chives (Allium tuberosum) as a hydroponic plant. The results showed that based on dry weight, the leaves of Allium tuberosum grew 142% more in the MFC-Hyp than those of the plant in the Hyp without the MFC, in a 49-day run. The mass fluxes of K, P, and NO3−-N from the MFC to the Hyp through the ceramic membrane were 4.18 ± 0.70, 3.78 ± 1.90, and 2.04 ± 0.98 µg s−1m−2, respectively. It was apparent that the diffusion of nutrients from wastewater in the MFC enhanced the plant growth in the Hyp. The MFC-Hyp in the presence of A. tuberosum produced the maximum power density of 130.2 ± 45.4 mW m−2. The findings of this study suggest that the MFC-Hyp system has great potential to be a “carbon-neutral” technology that could be transformed into an important part of a diversified worldwide energy–water–food supply system.

30 September 2025 in Membranes
Verified
Journal Article
Open access
PDF file
Chikashi SatoChikashi Sato
Chikashi Sato
Ghazaleh AlikaramGhazaleh Alikaram
Ghazaleh Alikaram
OKOluwafemi Oladipupo Kolajo
Oluwafemi Oladipupo Kolajo
JDJohn Dudgeon
John Dudgeon
RHRebecca Hazard
Rebecca Hazard
Sathish Kumar KamarajSathish Kumar Kamaraj
Sathish Kumar Kamaraj
Microalgae are promising candidates for renewable biofuel production and nutrient-rich animal feed. Cultivating microalgae using wastewater can lower production costs but often results in biomass contamination and increases downstream processing requirements. This study presents a novel system that integrates an algae cultivator (AC) with a single-chamber microbial fuel cell (MFC) equipped with photosynthetic and air-cathode functionalities, separated by a ceramic membrane. The system enables the generation of electricity and production of clean microalgae biomass concurrently, in both light and dark conditions, utilizing wastewater as a nutrient source and renewable energy. The MFC chamber was filled with simulated potato processing wastewater, while the AC chamber contained microalgae Chlorella vulgaris in a growth medium. The ceramic membrane allowed nutrient diffusion while preventing direct contact between algae and wastewater. This design effectively supported algal growth and produced uncontaminated, harvestable biomass. At the same time, larger particulates and undesirable substances were retained in the MFC. The system can be operated with synergy between the MFC and AC systems, reducing operational and pretreatment costs. Overall, this hybrid design highlights a sustainable pathway for integrating electricity generation, nutrient recovery, and algae-based biofuel feedstock production, with improved economic feasibility due to high-quality biomass cultivation and the ability to operate continuously under variable lighting conditions.