Mineral oil-based lubricants contain harmful elements, such as sulfur and phosphorus, pose significant harm to the environment. In current research on the application of waste oils and fats in bio-based lubricants, most studies focus on single pretreatment processes or additive preparation, lacking systematic investigations into the combined use of composite pretreatment and additives on lubricant performance. Moreover, the decolorization efficiency of traditional physical adsorption methods for treating waste oils and fats is limited, making it difficult to meet the raw material requirements for bio-based lubricants. The purpose of this study is to conduct composite pretreatment processes on waste oils and fats, understand the impacts of parameters such as additive dosage and environmental factors on lubricant performance, establish an environmentally friendly and performance-compliant preparation process for bio-based lubricants, and provide a theoretical basis and technical support for its industrial application. Recent studies have shown that new decolorization processes for waste oil treatment significantly improve decolorization and recovery rates, as evidenced by research comparing new and traditional methods. Pretreatment with hydrogen peroxide, activated clay, and activated carbon significantly improved the color and odor of treated waste oil, meeting standards for bio-based lubricant production. The intercalation polymerization reaction between ethyl cellulose (EC) and montmorillonite (MMT) was employed to develop an additive (CTAB-MMT/KH560-EC). A thorough investigation was performed to analyze the impact of temperature, processing time, and additive concentration on the rheological behavior. The bio-based lubricant exhibited a kinematic viscosity of 200.3 mm2/s at 40 °C and 28.3 mm2/s at 100 °C, meeting the standard conditions as outlined in ASTM D2270-10e1. This lubricant achieved an improved low-temperature performance with a pour point of −22 °C, a friction coefficient of 0.081, and an average pitting diameter of 0.94 mm, indicating its suitability for a range of applications. These lubricants exhibit outstanding viscosity characteristics, meeting the relevant requirements for energy and environmental applications in green, eco-friendly, and biodegradable sustainable development strategies while expanding their application scope.
As a key medium in industry, lubricating oil plays a significant role in reducing friction, cooling sealing and transmitting power, which directly affects equipment life and energy efficiency. Traditional mineral-based lubricating oils rely on non-renewable petroleum, and they have high energy consumption and poor biodegradability ( −10 °C), and easy precipitation of wax crystals at low temperature, which restricts their industrial application. In recent years, a series of modification studies have been carried out around “pour point depression-viscosity preservation”. Catalytic isomerization can reduce the freezing point to −42 °C while maintaining a high viscosity index. Epoxidation–ring-opening modification introduces branched chains or ether bonds, taking into account low-temperature fluidity and oxidation stability. The deep dewaxing-isomerization dewaxing process improves the base oil yield, and the freezing point drops by 30 °C. The synergistic addition of polymer pour point depressant and nanomaterials can further reduce the freezing point by 10–15 °C and improve the cryogenic pumping performance. The life cycle assessment shows that using the “zero crude oil” route of waste oil and green hydrogen, the carbon emission per ton of lubricating oil is only 0.32 t, and the cost gradually approaches the level of imported synthetic esters. In the future, with the help of biorefinery integration, enzyme catalytic modification and AI molecular design, it is expected to realize high-performance, low-cost, near-zero-carbon lubrication solutions and promote the green transformation of industry.
Conventional adhesives for plywood are mostly derived from petroleum-based materials and commonly suffer from formaldehyde emission, posing threats to the environment and human health. In this study, a renewable resource, Xanthoceras sorbifolium Bunge oil, was used as the raw material. A high-performance bio-based adhesive was successfully prepared by synthesizing Xanthoceras sorbifolium Bunge oil dimethacrylate (MXOEA) as a reactive diluent, blending it with acrylated epoxy Xanthoceras sorbifolium Bunge oil (AEXO), and introducing 2-isocyanatoethyl methacrylate (IEM) to enhance crosslinking. The effects of the MXOEA/AEXO ratio and the IEM addition level on the properties of the adhesive and the resulting plywood were systematically investigated. The results showed that when the mass ratio of AEXO to MXOEA was 3:7, and the IEM content was 10%, the adhesive exhibited the best bonding performance: the resulting plywood achieved a modulus of rupture of 68.85 MPa, a modulus of elasticity of 8086 MPa, and dry and wet bonding strengths of 3.21 MPa and 2.32 MPa, respectively. Mechanistic analysis indicated that the introduction of IEM moderately reduced the viscosity of the adhesive system. Meanwhile, the isocyanate groups in IEM reacted with the hydroxyl groups on the wood surface, forming a chemical crosslinking structure at the adhesive-wood interface, which is considered one of the reasons for the improved mechanical properties of the plywood. This study provides a formaldehyde-free, high-performance bio-based adhesive derived from Xanthoceras sorbifolium Bunge oil for the field of wood-based composites.
Lubricating oil plays a critical role in protecting mechanical systems. Driven by sustainable development strategies, the development of high-performance, biocompatible green lubricants has become an urgent industry need. Biomass resources, characterized by wide distribution, renewability, and environmental friendliness, represent ideal raw materials for replacing petrochemical-based lubricants. In this study, renewable Xanthoceras sorbifolia oil was utilized as the feedstock. Branched modification was achieved via ring-opening esterification using 2-ethylhexanol (2-EH) as the modifier and tetrafluoroboric acid (HBF4) as the catalyst. This epoxidation-branching modification process was synergistically combined with Nano-C14MA/MMT treatment. This approach significantly reduced high-temperature kinematic viscosity loss while maintaining excellent low-temperature flow properties, resulting in an Xanthoceras sorbifolia oil-based lubricant with outstanding viscosity–temperature performance and low-temperature fluidity. At a Nano-C14MA/MMT mass ratio of 0.3 wt% of the base oil, the lubricant demonstrated superior wide-temperature performance: KV40 = 424.1 mm2/s, KV100 = 50.8 mm2/s, VI = 180.8. The SP was reduced to −43 °C, exceeding the performance requirements of V-class environmentally friendly lubricants (e.g., synthetic ester oils). Furthermore, the coefficient of friction (COF) was 0.011 and the anti-wear scar diameter (AWSD) was 0.44 mm, indicating lubrication performance significantly superior to SN-class lubricants (specifications: COF < 0.12, AWSD < 0.50 mm).