High-sensitivity material analysis techniques, relying on conventional (radio frequency-based and electrostatic) particle accelerators, such as particle-induced x-ray emission and particle-induced gamma-ray emission, face limitations for widespread applications due to their size and complexity, restricting real-time and portable use. In this Letter, we demonstrate that the simultaneous use of laser-generated protons and laser-generated x-rays, as obtained by interaction of a high-power laser with a target, can be used to analyze aerosols and emission gases and allow for a rapid detection of (harmful) elements down to particle concentrations of hundreds of ppm. This technique represents a promising advancement for portable, rapid, and real-time chemical composition analysis with potential applications in environmental monitoring, industrial emissions, and urban air quality management.
This study critically evaluates femtosecond (fs) laser cleaning of historical vegetable-tanned goat leather, addressing quantification on porous, heterogeneous surfaces. Artificially aged, graphite-contaminated samples were treated by fs-laser irradiation with varying fluence and shot number. Cleaning performance was assessed by high-resolution CIE L * a * b * colorimetry, complemented by quantitative porosity analysis using optical microscopy and ImageJ. Pore-size measurements showed a mixed distribution of small and large pores affecting cleaning uniformity. Fs-laser cleaning reduced visible contamination, with Δ E* approaching the perceptibility threshold of 2.0. However, the leather microstructure led to significant reflectance variability, underscoring the limitations of area-averaged colorimetry for cleaning assessment. Comparative measurements on graphite-contaminated parchment, with negligible porosity but pronounced micro-relief, showed that pore structure and micro-topography govern optical consistency. Overall, these findings underscore the need to interpret colorimetry in relation to surface morphology and support integrating spatially localized optical diagnostics into fs-laser cleaning protocols to preserve visual integrity.
Pulsed laser cleaning of cultural heritage materials requires removing unwanted deposits from fragile substrates without inducing collateral damage. This study explores femtosecond (fs) laser cleaning of cellulose-based historical papers through a combined experimental and modeling approach. Paper samples, prepared with traditional Turkish-Ottoman sizings (alum–egg, corn starch, wheat starch) and subjected to artificial aging, were contaminated with graphite and graphite–kaolinite mixtures to replicate historical soiling. Fs laser treatments were performed within the experimentally verified safe fluence range of 0.39–0.78 J/cm 2 , and the cleaning effects were monitored using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy. The measurements demonstrated effective removal of graphite and partial reduction of kaolinite, while confirming the preservation of cellulose and sizing features. Burnished samples exhibited lower cleaning efficiency due to deeper contaminant embedding. Beyond these experiments, we introduce, for the first time in the context of paper conservation, the integration of ATR-FTIR spectroscopy with exponential saturation and decay models. This approach enables a quantitative assessment of both cleaning efficiency and residual contamination while providing predictive insight into fluence thresholds extending beyond the experimentally tested range. Overall, the combined experimental–modeling methodology establishes a robust framework for defining safe and effective fs laser cleaning parameters, offering new opportunities for the quantitative optimization of paper artifact conservation.