Elias Catrix

Elias Catrix

Auto-generated profile, based on publicly available information

Elias Catrix

INRS-EMT, 1650 Boul. Lionel-Boulet 1 , Varennes, Quebec J3X 1P7

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 September 2024 in Physics of Plasmas
Verified
Journal Article
Open access
PDF file
RLRonan Lelièvre
Ronan Lelièvre
ECE. Catrix
E. Catrix
SVS. Vallières
S. Vallières
SFS. Fourmaux
S. Fourmaux
AAA. Allaoua
A. Allaoua
JFJulien Fuchs
Julien Fuchs
Neutron beams are an essential tool to investigate material structure and perform nondestructive analysis, as they give unique access to element composition, thus ideally complementing density analysis allowed by standard x-rays investigation. Laser-driven neutron sources, though compact and cost-effective, currently have lower average flux than conventional neutron sources, due to the limited repetition rate of the lasers used so far. However, advancements in laser technology allow nowadays to address this challenge. Here, we report results obtained at the Advanced Laser Light Source characterizing stable production of broadband (0.1–2 MeV) neutrons produced at a high repetition rate (0.5 Hz). The interaction of laser pulses of 22 fs duration and 3.2 J on-target energy with 2-μm-thick tantalum targets produced protons in the Target Normal Sheath Acceleration (TNSA) regime up to 7.3 MeV. These protons were subsequently converted into neutrons by (p,n) reactions in lithium fluoride (LiF). Activation measurements and bubble detectors were used to characterize neutron emissions, with a neutron fluence of up to ∼1.4×105 neutrons/shot/sr and energies mainly between a few hundred of kilo-electron volt and 2 MeV. The total neutron yield was ∼5×105 neutrons/shot. This paves the way for numerous applications, e.g., in homeland security, materials science, or cultural heritage.

1 October 2023 in Review of Scientific Instruments
Verified
Journal Article
Closed access
PDF file
ECElias Catrix
Elias Catrix
FBFrédéric Boivin
Frédéric Boivin
KLKassandra Langlois
Kassandra Langlois
SVSimon Vallières
Simon Vallières
CBCanan Yağmur Boynukara
Canan Yağmur Boynukara
PAPatrizio Antici
Patrizio Antici
Laser-driven proton accelerators are relevant candidates for many applications such as material science or medicine. Today, there are multi-hundred-TW table-top laser systems that can generate relativistic peak intensities >1018 W/cm2 and routinely reach proton energies in the MeV range. However, for most desired applications, there is still a need to optimize the quality and stability of the laser-generated proton beam. In this work, we developed a 0.625 Hz high repetition-rate setup in which a laser with 2.5% RMS energy stability is irradiating a solid target with an intensity of 1019 to 1020 W/cm2 to explore proton energy and yield variations, both with high shot statistics (up to about 400 laser shots) and using different interaction targets. Investigating the above-mentioned parameters is important for applications that rely on specific parts of the proton spectrum or a high ion flux produced over quick multi-shot irradiation. We demonstrate that the use of a stable “multi-shot mode” allows improving applications, e.g., in the detection of trace elements using laser-driven particle-induced x-ray emission.

20 March 2025 in Matter and Radiation at Extremes
Verified
Journal Article
Open access
CLC. L. C. Lacoste
C. L. C. Lacoste
ECE. Catrix
E. Catrix
SVS. Vallières
S. Vallières
AHA. Hirsch-Passicos
A. Hirsch-Passicos
TGThéo Guilberteau
Théo Guilberteau
MBM. Bardon
M. Bardon
Laser-driven ion acceleration, as produced by interaction of a high-intensity laser with a target, is a growing field of interest. One of the current challenges is to enhance the acceleration process, i.e., to increase the produced ion energy and the ion number and to shape the energy distribution for future applications. In this paper, we investigate the effect of helical coil (HC) targets on the laser–matter interaction process using a 150 TW laser. We demonstrate that HC targets significantly enhance proton acceleration, improving energy bunching and beam focusing and increasing the cutoff energy. For the first time, we extend this analysis to carbon ions, revealing a marked reduction in the number of low-energy carbon ions and the potential for energy bunching and post-acceleration through an optimized HC design. Simulations using the particle-in-cell code SOPHIE confirm the experimental results, providing insights into the current propagation and ion synchronization mechanisms in HCs. Our findings suggest that HC targets can be optimized for multispecies ion acceleration.

23 June 2025 in Applied Physics Letters
Verified
Journal Article
Closed access
ECElias Catrix
Elias Catrix
SFSylvain Fourmaux
Sylvain Fourmaux
SVSimon Vallières
Simon Vallières
FBFrançois Bianchi
François Bianchi
FFFrançois Fillion-Gourdeau
François Fillion-Gourdeau
PAPatrizio Antici
Patrizio Antici
Laser-driven proton acceleration, as obtained by the interaction of a high-intensity laser with matter, is a promising technique for generating high-quality proton beams. One of the main challenges is increasing the maximum proton energy. Here, we demonstrate a 70% increase in the maximum energy of laser-driven protons by optimizing the wavefront of the intense laser using machine learning: This was accomplished through adaptive control of a deformable mirror (DM) using a multi-step Random Forest surrogate-assisted Bayesian optimization approach. Starting from zeroed DM actuator voltages, our method identified an optimal configuration using 20 out of 48 actuators, requiring fewer than 150 experimental data samples. Our method surpassed conventional wavefront correction by 24%, which typically minimizes aberrations to converge toward a flat wavefront by leveraging real-time feedback from a wavefront sensor. This data-driven method integrating advanced wavefront control challenges the preference for correcting aberrations to achieve a flatter wavefront in laser-driven ion acceleration. We also propose a strategy for optimizing short focal length ion accelerators at facilities where measuring the wavefront at nominal full laser power is not implemented.

17 November 2025 in Applied Physics Letters
Verified
Journal Article
Closed access
NDNils Dietrich
Nils Dietrich
CBCanan Yagmur Boynukara
Canan Yagmur Boynukara
ECElias Catrix
Elias Catrix
SFSylvain Fourmaux
Sylvain Fourmaux
JMJoël Maltais
Joël Maltais
PAPatrizio Antici
Patrizio Antici
High-sensitivity material analysis techniques, relying on conventional (radio frequency-based and electrostatic) particle accelerators, such as particle-induced x-ray emission and particle-induced gamma-ray emission, face limitations for widespread applications due to their size and complexity, restricting real-time and portable use. In this Letter, we demonstrate that the simultaneous use of laser-generated protons and laser-generated x-rays, as obtained by interaction of a high-power laser with a target, can be used to analyze aerosols and emission gases and allow for a rapid detection of (harmful) elements down to particle concentrations of hundreds of ppm. This technique represents a promising advancement for portable, rapid, and real-time chemical composition analysis with potential applications in environmental monitoring, industrial emissions, and urban air quality management.

18 May 2026 in Optics Express
Verified
Journal Article
Closed access
ECElias Catrix
Elias Catrix
SFSylvain Fourmaux
Sylvain Fourmaux
SVSimon Vallières
Simon Vallières
FFFrançois Fillion-Gourdeau
François Fillion-Gourdeau
JMJoël Maltais
Joël Maltais
PAPatrizio Antici
Patrizio Antici
We present a parametric and machine-learning–assisted study of laser-driven proton acceleration using spatio-temporal laser-beam shaping employed in the most routinely used acceleration regime, the so-called Target Normal Sheath Acceleration (TNSA) regime. By employing 20 of the 48 actuators of a deformable mirror in combination with an acousto-optic programmable dispersive filter, we independently tailored the laser’s spatial wavefront and spectral phase. Irradiating 4.5- μ m-thick aluminum targets (that produce the most stable TNSA-accelerated beam in our conditions) with a fixed laser energy of 3.2 J reveals that spatial beam shaping strongly influences experimental observables associated with proton acceleration, while temporal shaping produces only a minor effect. Through correlation analysis and surrogate modeling, we further identify the maximum proton energy as a robust and predictive proxy for overall TNSA performance within the present dataset, making it a practical metric for optimization under our experimental conditions.