The parametric vibration and combined resonance of a turbine blade with a preset angle subjected to the combined effect of parametric and forced excitation were investigated. The blade was modeled as a rotating beam considering the effects of centrifugal, gyroscopic, and bending-torsion coupling. The instability region of the corresponding linear system with parametric excitation was analyzed using Floquet theory, and the effect of blade parameters on this region was discussed. Notably, the parametric vibration of the torsional degree-of-freedom (DOF) caused by parametric excitation of the bending degree-of-freedom has been found. The results show that the size and position of the parameter resonance region are affected by the blade aspect ratio and preset angle, respectively. Furthermore, the multiscale method was employed to solve the blade equation under the combined action of parametric and forced excitation to study the combined resonance caused by forced excitation and gyroscopic items. The effect of blade parameters and excitation characteristics on regions of combined resonance were investigated. The phenomenon of heteroclinic bifurcation was observed due to changes in the excitation frequency, and the harmonic components that accompanied the bifurcation changed. Specifically, a multiperiod response dominated by the excitation frequency and subharmonic components shifted to a single-period response dominated by subharmonic components. This study provides a theoretical explanation for the nonsynchronous resonance of blades and the subharmonic signals in blade vibration and guides blade parameter design, especially for wind turbines.
The durability of threaded fasteners is critical to chassis reliability. Conventional load spectrum editing often retains low-amplitude, high-cycle loads that extend test time without affecting preload. This study introduces an accelerated editing method that integrates the bolt critical load threshold with the S-transform to account for the loosening mechanism of fasteners. Road load data were collected under representative driving conditions, and the proposed method was used to remove non-damaging segments while preserving fatigue-relevant features. Simulation results show that the edited spectrum significantly shortens test duration while maintaining consistency with the original in statistical parameters, spectral distribution, and fatigue damage. The method improves testing efficiency and provides practical value for automotive durability evaluation, product development, and quality assurance.
The cooling system is a core component for a vehicle’s powertrains to operate smoothly and maintain a satisfying noise, vibration, and harshness (NVH) performance. However, advances in new energy vehicles bring with them complex requirements for the cooling fan design due to new issues such as increased heat load, dynamic variations, and high-speed vibrations, which demand the optimization of fan dynamics over a wide range of parameters. In this paper, by thoroughly checking the effect of rigid–flexible coupling and the geometrically complex elastic frame of the fan, we propose a combined modeling approach to reduce the computational time of broad-range parameter variation analysis and examine the vibration problem in the cooling fans under various external excitations. First, the complicated frame of the fan is simplified through virtual prototyping based on an experiment. Then, modal transition is applied, reducing the complex kinetic expression, and a time-invariant system model is derived with multi-blade coordinate transformation. Stability and bifurcation analysis are performed regarding different excitation couplings from the rotor, powertrain, and road. The results of the simulation and experiment illustrate that the proposed methodology achieves a substantial reduction in computational time, and all degrees of freedom (DOFs) are divided into two groups including symmetrical and asymmetrical types. The results also imply the great potential for the optimization and control of the high-speed fan’s vibration for new energy cars.